From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/drm/drm_mipi_dsi.h | 358 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 358 insertions(+) create mode 100644 include/drm/drm_mipi_dsi.h (limited to 'include/drm/drm_mipi_dsi.h') diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h new file mode 100644 index 000000000..20b21b577 --- /dev/null +++ b/include/drm/drm_mipi_dsi.h @@ -0,0 +1,358 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * MIPI DSI Bus + * + * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. + * Andrzej Hajda + */ + +#ifndef __DRM_MIPI_DSI_H__ +#define __DRM_MIPI_DSI_H__ + +#include + +struct mipi_dsi_host; +struct mipi_dsi_device; +struct drm_dsc_picture_parameter_set; + +/* request ACK from peripheral */ +#define MIPI_DSI_MSG_REQ_ACK BIT(0) +/* use Low Power Mode to transmit message */ +#define MIPI_DSI_MSG_USE_LPM BIT(1) + +/** + * struct mipi_dsi_msg - read/write DSI buffer + * @channel: virtual channel id + * @type: payload data type + * @flags: flags controlling this message transmission + * @tx_len: length of @tx_buf + * @tx_buf: data to be written + * @rx_len: length of @rx_buf + * @rx_buf: data to be read, or NULL + */ +struct mipi_dsi_msg { + u8 channel; + u8 type; + u16 flags; + + size_t tx_len; + const void *tx_buf; + + size_t rx_len; + void *rx_buf; +}; + +bool mipi_dsi_packet_format_is_short(u8 type); +bool mipi_dsi_packet_format_is_long(u8 type); + +/** + * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format + * @size: size (in bytes) of the packet + * @header: the four bytes that make up the header (Data ID, Word Count or + * Packet Data, and ECC) + * @payload_length: number of bytes in the payload + * @payload: a pointer to a buffer containing the payload, if any + */ +struct mipi_dsi_packet { + size_t size; + u8 header[4]; + size_t payload_length; + const u8 *payload; +}; + +int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, + const struct mipi_dsi_msg *msg); + +/** + * struct mipi_dsi_host_ops - DSI bus operations + * @attach: attach DSI device to DSI host + * @detach: detach DSI device from DSI host + * @transfer: transmit a DSI packet + * + * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg + * structures. This structure contains information about the type of packet + * being transmitted as well as the transmit and receive buffers. When an + * error is encountered during transmission, this function will return a + * negative error code. On success it shall return the number of bytes + * transmitted for write packets or the number of bytes received for read + * packets. + * + * Note that typically DSI packet transmission is atomic, so the .transfer() + * function will seldomly return anything other than the number of bytes + * contained in the transmit buffer on success. + * + * Also note that those callbacks can be called no matter the state the + * host is in. Drivers that need the underlying device to be powered to + * perform these operations will first need to make sure it's been + * properly enabled. + */ +struct mipi_dsi_host_ops { + int (*attach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + int (*detach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + ssize_t (*transfer)(struct mipi_dsi_host *host, + const struct mipi_dsi_msg *msg); +}; + +/** + * struct mipi_dsi_host - DSI host device + * @dev: driver model device node for this DSI host + * @ops: DSI host operations + * @list: list management + */ +struct mipi_dsi_host { + struct device *dev; + const struct mipi_dsi_host_ops *ops; + struct list_head list; +}; + +int mipi_dsi_host_register(struct mipi_dsi_host *host); +void mipi_dsi_host_unregister(struct mipi_dsi_host *host); +struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node); + +/* DSI mode flags */ + +/* video mode */ +#define MIPI_DSI_MODE_VIDEO BIT(0) +/* video burst mode */ +#define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +/* video pulse mode */ +#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +/* enable auto vertical count mode */ +#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +/* enable hsync-end packets in vsync-pulse and v-porch area */ +#define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +/* disable hfront-porch area */ +#define MIPI_DSI_MODE_VIDEO_NO_HFP BIT(5) +/* disable hback-porch area */ +#define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6) +/* disable hsync-active area */ +#define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7) +/* flush display FIFO on vsync pulse */ +#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +/* disable EoT packets in HS mode */ +#define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +/* transmit data in low power */ +#define MIPI_DSI_MODE_LPM BIT(11) +/* transmit data ending at the same time for all lanes within one hsync */ +#define MIPI_DSI_HS_PKT_END_ALIGNED BIT(12) + +enum mipi_dsi_pixel_format { + MIPI_DSI_FMT_RGB888, + MIPI_DSI_FMT_RGB666, + MIPI_DSI_FMT_RGB666_PACKED, + MIPI_DSI_FMT_RGB565, +}; + +#define DSI_DEV_NAME_SIZE 20 + +/** + * struct mipi_dsi_device_info - template for creating a mipi_dsi_device + * @type: DSI peripheral chip type + * @channel: DSI virtual channel assigned to peripheral + * @node: pointer to OF device node or NULL + * + * This is populated and passed to mipi_dsi_device_new to create a new + * DSI device + */ +struct mipi_dsi_device_info { + char type[DSI_DEV_NAME_SIZE]; + u32 channel; + struct device_node *node; +}; + +/** + * struct mipi_dsi_device - DSI peripheral device + * @host: DSI host for this peripheral + * @dev: driver model device node for this peripheral + * @name: DSI peripheral chip type + * @channel: virtual channel assigned to the peripheral + * @format: pixel format for video mode + * @lanes: number of active data lanes + * @mode_flags: DSI operation mode related flags + * @hs_rate: maximum lane frequency for high speed mode in hertz, this should + * be set to the real limits of the hardware, zero is only accepted for + * legacy drivers + * @lp_rate: maximum lane frequency for low power mode in hertz, this should + * be set to the real limits of the hardware, zero is only accepted for + * legacy drivers + * @dsc: panel/bridge DSC pps payload to be sent + */ +struct mipi_dsi_device { + struct mipi_dsi_host *host; + struct device dev; + + char name[DSI_DEV_NAME_SIZE]; + unsigned int channel; + unsigned int lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; + unsigned long hs_rate; + unsigned long lp_rate; + struct drm_dsc_config *dsc; +}; + +#define MIPI_DSI_MODULE_PREFIX "mipi-dsi:" + +static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev) +{ + return container_of(dev, struct mipi_dsi_device, dev); +} + +/** + * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any + * given pixel format defined by the MIPI DSI + * specification + * @fmt: MIPI DSI pixel format + * + * Returns: The number of bits per pixel of the given pixel format. + */ +static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + case MIPI_DSI_FMT_RGB666: + return 24; + + case MIPI_DSI_FMT_RGB666_PACKED: + return 18; + + case MIPI_DSI_FMT_RGB565: + return 16; + } + + return -EINVAL; +} + +struct mipi_dsi_device * +mipi_dsi_device_register_full(struct mipi_dsi_host *host, + const struct mipi_dsi_device_info *info); +void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi); +struct mipi_dsi_device * +devm_mipi_dsi_device_register_full(struct device *dev, struct mipi_dsi_host *host, + const struct mipi_dsi_device_info *info); +struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np); +int mipi_dsi_attach(struct mipi_dsi_device *dsi); +int mipi_dsi_detach(struct mipi_dsi_device *dsi); +int devm_mipi_dsi_attach(struct device *dev, struct mipi_dsi_device *dsi); +int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, + u16 value); +ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable); +ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi, + const struct drm_dsc_picture_parameter_set *pps); + +ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, + size_t size); +ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, + size_t num_params, void *data, size_t size); + +/** + * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode + * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking + * information only + * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both + * V-Blanking and H-Blanking information + */ +enum mipi_dsi_dcs_tear_mode { + MIPI_DSI_DCS_TEAR_MODE_VBLANK, + MIPI_DSI_DCS_TEAR_MODE_VHBLANK, +}; + +#define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2) +#define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3) +#define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4) +#define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5) +#define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6) + +ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, + const void *data, size_t len); +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, + const void *data, size_t len); +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len); +int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); +int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); +int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, + enum mipi_dsi_dcs_tear_mode mode); +int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); +int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline); +int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, + u16 brightness); +int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, + u16 *brightness); + +/** + * mipi_dsi_dcs_write_seq - transmit a DCS command with payload + * @dsi: DSI peripheral device + * @cmd: Command + * @seq: buffer containing data to be transmitted + */ +#define mipi_dsi_dcs_write_seq(dsi, cmd, seq...) do { \ + static const u8 d[] = { cmd, seq }; \ + struct device *dev = &dsi->dev; \ + int ret; \ + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) { \ + dev_err_ratelimited(dev, "sending command %#02x failed: %d\n", cmd, ret); \ + return ret; \ + } \ + } while (0) + +/** + * struct mipi_dsi_driver - DSI driver + * @driver: device driver model driver + * @probe: callback for device binding + * @remove: callback for device unbinding + * @shutdown: called at shutdown time to quiesce the device + */ +struct mipi_dsi_driver { + struct device_driver driver; + int(*probe)(struct mipi_dsi_device *dsi); + void (*remove)(struct mipi_dsi_device *dsi); + void (*shutdown)(struct mipi_dsi_device *dsi); +}; + +static inline struct mipi_dsi_driver * +to_mipi_dsi_driver(struct device_driver *driver) +{ + return container_of(driver, struct mipi_dsi_driver, driver); +} + +static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi) +{ + return dev_get_drvdata(&dsi->dev); +} + +static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data) +{ + dev_set_drvdata(&dsi->dev, data); +} + +int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver, + struct module *owner); +void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver); + +#define mipi_dsi_driver_register(driver) \ + mipi_dsi_driver_register_full(driver, THIS_MODULE) + +#define module_mipi_dsi_driver(__mipi_dsi_driver) \ + module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \ + mipi_dsi_driver_unregister) + +#endif /* __DRM_MIPI_DSI__ */ -- cgit v1.2.3