From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/dt-bindings/mfd/qcom-rpm.h | 183 +++++++++++++++++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 include/dt-bindings/mfd/qcom-rpm.h (limited to 'include/dt-bindings/mfd/qcom-rpm.h') diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h new file mode 100644 index 000000000..c9204c4df --- /dev/null +++ b/include/dt-bindings/mfd/qcom-rpm.h @@ -0,0 +1,183 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for the Qualcomm RPM bindings. + */ + +#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H +#define _DT_BINDINGS_MFD_QCOM_RPM_H + +/* + * Constants use to identify individual resources in the RPM. + */ +#define QCOM_RPM_APPS_FABRIC_ARB 1 +#define QCOM_RPM_APPS_FABRIC_CLK 2 +#define QCOM_RPM_APPS_FABRIC_HALT 3 +#define QCOM_RPM_APPS_FABRIC_IOCTL 4 +#define QCOM_RPM_APPS_FABRIC_MODE 5 +#define QCOM_RPM_APPS_L2_CACHE_CTL 6 +#define QCOM_RPM_CFPB_CLK 7 +#define QCOM_RPM_CXO_BUFFERS 8 +#define QCOM_RPM_CXO_CLK 9 +#define QCOM_RPM_DAYTONA_FABRIC_CLK 10 +#define QCOM_RPM_DDR_DMM 11 +#define QCOM_RPM_EBI1_CLK 12 +#define QCOM_RPM_HDMI_SWITCH 13 +#define QCOM_RPM_MMFPB_CLK 14 +#define QCOM_RPM_MM_FABRIC_ARB 15 +#define QCOM_RPM_MM_FABRIC_CLK 16 +#define QCOM_RPM_MM_FABRIC_HALT 17 +#define QCOM_RPM_MM_FABRIC_IOCTL 18 +#define QCOM_RPM_MM_FABRIC_MODE 19 +#define QCOM_RPM_PLL_4 20 +#define QCOM_RPM_PM8058_LDO0 21 +#define QCOM_RPM_PM8058_LDO1 22 +#define QCOM_RPM_PM8058_LDO2 23 +#define QCOM_RPM_PM8058_LDO3 24 +#define QCOM_RPM_PM8058_LDO4 25 +#define QCOM_RPM_PM8058_LDO5 26 +#define QCOM_RPM_PM8058_LDO6 27 +#define QCOM_RPM_PM8058_LDO7 28 +#define QCOM_RPM_PM8058_LDO8 29 +#define QCOM_RPM_PM8058_LDO9 30 +#define QCOM_RPM_PM8058_LDO10 31 +#define QCOM_RPM_PM8058_LDO11 32 +#define QCOM_RPM_PM8058_LDO12 33 +#define QCOM_RPM_PM8058_LDO13 34 +#define QCOM_RPM_PM8058_LDO14 35 +#define QCOM_RPM_PM8058_LDO15 36 +#define QCOM_RPM_PM8058_LDO16 37 +#define QCOM_RPM_PM8058_LDO17 38 +#define QCOM_RPM_PM8058_LDO18 39 +#define QCOM_RPM_PM8058_LDO19 40 +#define QCOM_RPM_PM8058_LDO20 41 +#define QCOM_RPM_PM8058_LDO21 42 +#define QCOM_RPM_PM8058_LDO22 43 +#define QCOM_RPM_PM8058_LDO23 44 +#define QCOM_RPM_PM8058_LDO24 45 +#define QCOM_RPM_PM8058_LDO25 46 +#define QCOM_RPM_PM8058_LVS0 47 +#define QCOM_RPM_PM8058_LVS1 48 +#define QCOM_RPM_PM8058_NCP 49 +#define QCOM_RPM_PM8058_SMPS0 50 +#define QCOM_RPM_PM8058_SMPS1 51 +#define QCOM_RPM_PM8058_SMPS2 52 +#define QCOM_RPM_PM8058_SMPS3 53 +#define QCOM_RPM_PM8058_SMPS4 54 +#define QCOM_RPM_PM8821_LDO1 55 +#define QCOM_RPM_PM8821_SMPS1 56 +#define QCOM_RPM_PM8821_SMPS2 57 +#define QCOM_RPM_PM8901_LDO0 58 +#define QCOM_RPM_PM8901_LDO1 59 +#define QCOM_RPM_PM8901_LDO2 60 +#define QCOM_RPM_PM8901_LDO3 61 +#define QCOM_RPM_PM8901_LDO4 62 +#define QCOM_RPM_PM8901_LDO5 63 +#define QCOM_RPM_PM8901_LDO6 64 +#define QCOM_RPM_PM8901_LVS0 65 +#define QCOM_RPM_PM8901_LVS1 66 +#define QCOM_RPM_PM8901_LVS2 67 +#define QCOM_RPM_PM8901_LVS3 68 +#define QCOM_RPM_PM8901_MVS 69 +#define QCOM_RPM_PM8901_SMPS0 70 +#define QCOM_RPM_PM8901_SMPS1 71 +#define QCOM_RPM_PM8901_SMPS2 72 +#define QCOM_RPM_PM8901_SMPS3 73 +#define QCOM_RPM_PM8901_SMPS4 74 +#define QCOM_RPM_PM8921_CLK1 75 +#define QCOM_RPM_PM8921_CLK2 76 +#define QCOM_RPM_PM8921_LDO1 77 +#define QCOM_RPM_PM8921_LDO2 78 +#define QCOM_RPM_PM8921_LDO3 79 +#define QCOM_RPM_PM8921_LDO4 80 +#define QCOM_RPM_PM8921_LDO5 81 +#define QCOM_RPM_PM8921_LDO6 82 +#define QCOM_RPM_PM8921_LDO7 83 +#define QCOM_RPM_PM8921_LDO8 84 +#define QCOM_RPM_PM8921_LDO9 85 +#define QCOM_RPM_PM8921_LDO10 86 +#define QCOM_RPM_PM8921_LDO11 87 +#define QCOM_RPM_PM8921_LDO12 88 +#define QCOM_RPM_PM8921_LDO13 89 +#define QCOM_RPM_PM8921_LDO14 90 +#define QCOM_RPM_PM8921_LDO15 91 +#define QCOM_RPM_PM8921_LDO16 92 +#define QCOM_RPM_PM8921_LDO17 93 +#define QCOM_RPM_PM8921_LDO18 94 +#define QCOM_RPM_PM8921_LDO19 95 +#define QCOM_RPM_PM8921_LDO20 96 +#define QCOM_RPM_PM8921_LDO21 97 +#define QCOM_RPM_PM8921_LDO22 98 +#define QCOM_RPM_PM8921_LDO23 99 +#define QCOM_RPM_PM8921_LDO24 100 +#define QCOM_RPM_PM8921_LDO25 101 +#define QCOM_RPM_PM8921_LDO26 102 +#define QCOM_RPM_PM8921_LDO27 103 +#define QCOM_RPM_PM8921_LDO28 104 +#define QCOM_RPM_PM8921_LDO29 105 +#define QCOM_RPM_PM8921_LVS1 106 +#define QCOM_RPM_PM8921_LVS2 107 +#define QCOM_RPM_PM8921_LVS3 108 +#define QCOM_RPM_PM8921_LVS4 109 +#define QCOM_RPM_PM8921_LVS5 110 +#define QCOM_RPM_PM8921_LVS6 111 +#define QCOM_RPM_PM8921_LVS7 112 +#define QCOM_RPM_PM8921_MVS 113 +#define QCOM_RPM_PM8921_NCP 114 +#define QCOM_RPM_PM8921_SMPS1 115 +#define QCOM_RPM_PM8921_SMPS2 116 +#define QCOM_RPM_PM8921_SMPS3 117 +#define QCOM_RPM_PM8921_SMPS4 118 +#define QCOM_RPM_PM8921_SMPS5 119 +#define QCOM_RPM_PM8921_SMPS6 120 +#define QCOM_RPM_PM8921_SMPS7 121 +#define QCOM_RPM_PM8921_SMPS8 122 +#define QCOM_RPM_PXO_CLK 123 +#define QCOM_RPM_QDSS_CLK 124 +#define QCOM_RPM_SFPB_CLK 125 +#define QCOM_RPM_SMI_CLK 126 +#define QCOM_RPM_SYS_FABRIC_ARB 127 +#define QCOM_RPM_SYS_FABRIC_CLK 128 +#define QCOM_RPM_SYS_FABRIC_HALT 129 +#define QCOM_RPM_SYS_FABRIC_IOCTL 130 +#define QCOM_RPM_SYS_FABRIC_MODE 131 +#define QCOM_RPM_USB_OTG_SWITCH 132 +#define QCOM_RPM_VDDMIN_GPIO 133 +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 +#define QCOM_RPM_SMB208_S1a 136 +#define QCOM_RPM_SMB208_S1b 137 +#define QCOM_RPM_SMB208_S2a 138 +#define QCOM_RPM_SMB208_S2b 139 +#define QCOM_RPM_PM8018_SMPS1 140 +#define QCOM_RPM_PM8018_SMPS2 141 +#define QCOM_RPM_PM8018_SMPS3 142 +#define QCOM_RPM_PM8018_SMPS4 143 +#define QCOM_RPM_PM8018_SMPS5 144 +#define QCOM_RPM_PM8018_LDO1 145 +#define QCOM_RPM_PM8018_LDO2 146 +#define QCOM_RPM_PM8018_LDO3 147 +#define QCOM_RPM_PM8018_LDO4 148 +#define QCOM_RPM_PM8018_LDO5 149 +#define QCOM_RPM_PM8018_LDO6 150 +#define QCOM_RPM_PM8018_LDO7 151 +#define QCOM_RPM_PM8018_LDO8 152 +#define QCOM_RPM_PM8018_LDO9 153 +#define QCOM_RPM_PM8018_LDO10 154 +#define QCOM_RPM_PM8018_LDO11 155 +#define QCOM_RPM_PM8018_LDO12 156 +#define QCOM_RPM_PM8018_LDO13 157 +#define QCOM_RPM_PM8018_LDO14 158 +#define QCOM_RPM_PM8018_LVS1 159 +#define QCOM_RPM_PM8018_NCP 160 +#define QCOM_RPM_VOLTAGE_CORNER 161 + +/* + * Constants used to select force mode for regulators. + */ +#define QCOM_RPM_FORCE_MODE_NONE 0 +#define QCOM_RPM_FORCE_MODE_LPM 1 +#define QCOM_RPM_FORCE_MODE_HPM 2 +#define QCOM_RPM_FORCE_MODE_AUTO 3 +#define QCOM_RPM_FORCE_MODE_BYPASS 4 + +#endif -- cgit v1.2.3