From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/dt-bindings/reset/qcom,gcc-msm8939.h | 110 +++++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 include/dt-bindings/reset/qcom,gcc-msm8939.h (limited to 'include/dt-bindings/reset/qcom,gcc-msm8939.h') diff --git a/include/dt-bindings/reset/qcom,gcc-msm8939.h b/include/dt-bindings/reset/qcom,gcc-msm8939.h new file mode 100644 index 000000000..fa41ffeae --- /dev/null +++ b/include/dt-bindings/reset/qcom,gcc-msm8939.h @@ -0,0 +1,110 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2020 Linaro Limited + */ + +#ifndef _DT_BINDINGS_RESET_MSM_GCC_8939_H +#define _DT_BINDINGS_RESET_MSM_GCC_8939_H + +#define GCC_BLSP1_BCR 0 +#define GCC_BLSP1_QUP1_BCR 1 +#define GCC_BLSP1_UART1_BCR 2 +#define GCC_BLSP1_QUP2_BCR 3 +#define GCC_BLSP1_UART2_BCR 4 +#define GCC_BLSP1_QUP3_BCR 5 +#define GCC_BLSP1_QUP4_BCR 6 +#define GCC_BLSP1_QUP5_BCR 7 +#define GCC_BLSP1_QUP6_BCR 8 +#define GCC_IMEM_BCR 9 +#define GCC_SMMU_BCR 10 +#define GCC_APSS_TCU_BCR 11 +#define GCC_SMMU_XPU_BCR 12 +#define GCC_PCNOC_TBU_BCR 13 +#define GCC_PRNG_BCR 14 +#define GCC_BOOT_ROM_BCR 15 +#define GCC_CRYPTO_BCR 16 +#define GCC_SEC_CTRL_BCR 17 +#define GCC_AUDIO_CORE_BCR 18 +#define GCC_ULT_AUDIO_BCR 19 +#define GCC_DEHR_BCR 20 +#define GCC_SYSTEM_NOC_BCR 21 +#define GCC_PCNOC_BCR 22 +#define GCC_TCSR_BCR 23 +#define GCC_QDSS_BCR 24 +#define GCC_DCD_BCR 25 +#define GCC_MSG_RAM_BCR 26 +#define GCC_MPM_BCR 27 +#define GCC_SPMI_BCR 28 +#define GCC_SPDM_BCR 29 +#define GCC_MM_SPDM_BCR 30 +#define GCC_BIMC_BCR 31 +#define GCC_RBCPR_BCR 32 +#define GCC_TLMM_BCR 33 +#define GCC_USB_HS_BCR 34 +#define GCC_USB2A_PHY_BCR 35 +#define GCC_SDCC1_BCR 36 +#define GCC_SDCC2_BCR 37 +#define GCC_PDM_BCR 38 +#define GCC_SNOC_BUS_TIMEOUT0_BCR 39 +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 40 +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 41 +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 42 +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 43 +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 44 +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 45 +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 46 +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 47 +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 48 +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 49 +#define GCC_MMSS_BCR 50 +#define GCC_VENUS0_BCR 51 +#define GCC_MDSS_BCR 52 +#define GCC_CAMSS_PHY0_BCR 53 +#define GCC_CAMSS_CSI0_BCR 54 +#define GCC_CAMSS_CSI0PHY_BCR 55 +#define GCC_CAMSS_CSI0RDI_BCR 56 +#define GCC_CAMSS_CSI0PIX_BCR 57 +#define GCC_CAMSS_PHY1_BCR 58 +#define GCC_CAMSS_CSI1_BCR 59 +#define GCC_CAMSS_CSI1PHY_BCR 60 +#define GCC_CAMSS_CSI1RDI_BCR 61 +#define GCC_CAMSS_CSI1PIX_BCR 62 +#define GCC_CAMSS_ISPIF_BCR 63 +#define GCC_CAMSS_CCI_BCR 64 +#define GCC_CAMSS_MCLK0_BCR 65 +#define GCC_CAMSS_MCLK1_BCR 66 +#define GCC_CAMSS_GP0_BCR 67 +#define GCC_CAMSS_GP1_BCR 68 +#define GCC_CAMSS_TOP_BCR 69 +#define GCC_CAMSS_MICRO_BCR 70 +#define GCC_CAMSS_JPEG_BCR 71 +#define GCC_CAMSS_VFE_BCR 72 +#define GCC_CAMSS_CSI_VFE0_BCR 73 +#define GCC_OXILI_BCR 74 +#define GCC_GMEM_BCR 75 +#define GCC_CAMSS_AHB_BCR 76 +#define GCC_MDP_TBU_BCR 77 +#define GCC_GFX_TBU_BCR 78 +#define GCC_GFX_TCU_BCR 79 +#define GCC_MSS_TBU_AXI_BCR 80 +#define GCC_MSS_TBU_GSS_AXI_BCR 81 +#define GCC_MSS_TBU_Q6_AXI_BCR 82 +#define GCC_GTCU_AHB_BCR 83 +#define GCC_SMMU_CFG_BCR 84 +#define GCC_VFE_TBU_BCR 85 +#define GCC_VENUS_TBU_BCR 86 +#define GCC_JPEG_TBU_BCR 87 +#define GCC_PRONTO_TBU_BCR 88 +#define GCC_SMMU_CATS_BCR 89 +#define GCC_BLSP1_UART3_BCR 90 +#define GCC_CAMSS_CSI2_BCR 91 +#define GCC_CAMSS_CSI2PHY_BCR 92 +#define GCC_CAMSS_CSI2RDI_BCR 93 +#define GCC_CAMSS_CSI2PIX_BCR 94 +#define GCC_USB_FS_BCR 95 +#define GCC_BLSP1_QUP4_SPI_APPS_CBCR 96 +#define GCC_CAMSS_MCLK2_BCR 97 +#define GCC_CPP_TBU_BCR 98 +#define GCC_MDP_RT_TBU_BCR 99 + +#endif -- cgit v1.2.3