From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/media/v4l2-device.h | 568 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 568 insertions(+) create mode 100644 include/media/v4l2-device.h (limited to 'include/media/v4l2-device.h') diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h new file mode 100644 index 000000000..8a8977a33 --- /dev/null +++ b/include/media/v4l2-device.h @@ -0,0 +1,568 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + V4L2 device support header. + + Copyright (C) 2008 Hans Verkuil + + */ + +#ifndef _V4L2_DEVICE_H +#define _V4L2_DEVICE_H + +#include +#include +#include + +#define V4L2_DEVICE_NAME_SIZE (20 + 16) + +struct v4l2_ctrl_handler; + +/** + * struct v4l2_device - main struct to for V4L2 device drivers + * + * @dev: pointer to struct device. + * @mdev: pointer to struct media_device, may be NULL. + * @subdevs: used to keep track of the registered subdevs + * @lock: lock this struct; can be used by the driver as well + * if this struct is embedded into a larger struct. + * @name: unique device name, by default the driver name + bus ID + * @notify: notify operation called by some sub-devices. + * @ctrl_handler: The control handler. May be %NULL. + * @prio: Device's priority state + * @ref: Keep track of the references to this struct. + * @release: Release function that is called when the ref count + * goes to 0. + * + * Each instance of a V4L2 device should create the v4l2_device struct, + * either stand-alone or embedded in a larger struct. + * + * It allows easy access to sub-devices (see v4l2-subdev.h) and provides + * basic V4L2 device-level support. + * + * .. note:: + * + * #) @dev->driver_data points to this struct. + * #) @dev might be %NULL if there is no parent device + */ +struct v4l2_device { + struct device *dev; + struct media_device *mdev; + struct list_head subdevs; + spinlock_t lock; + char name[V4L2_DEVICE_NAME_SIZE]; + void (*notify)(struct v4l2_subdev *sd, + unsigned int notification, void *arg); + struct v4l2_ctrl_handler *ctrl_handler; + struct v4l2_prio_state prio; + struct kref ref; + void (*release)(struct v4l2_device *v4l2_dev); +}; + +/** + * v4l2_device_get - gets a V4L2 device reference + * + * @v4l2_dev: pointer to struct &v4l2_device + * + * This is an ancillary routine meant to increment the usage for the + * struct &v4l2_device pointed by @v4l2_dev. + */ +static inline void v4l2_device_get(struct v4l2_device *v4l2_dev) +{ + kref_get(&v4l2_dev->ref); +} + +/** + * v4l2_device_put - puts a V4L2 device reference + * + * @v4l2_dev: pointer to struct &v4l2_device + * + * This is an ancillary routine meant to decrement the usage for the + * struct &v4l2_device pointed by @v4l2_dev. + */ +int v4l2_device_put(struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_register - Initialize v4l2_dev and make @dev->driver_data + * point to @v4l2_dev. + * + * @dev: pointer to struct &device + * @v4l2_dev: pointer to struct &v4l2_device + * + * .. note:: + * @dev may be %NULL in rare cases (ISA devices). + * In such case the caller must fill in the @v4l2_dev->name field + * before calling this function. + */ +int __must_check v4l2_device_register(struct device *dev, + struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_set_name - Optional function to initialize the + * name field of struct &v4l2_device + * + * @v4l2_dev: pointer to struct &v4l2_device + * @basename: base name for the device name + * @instance: pointer to a static atomic_t var with the instance usage for + * the device driver. + * + * v4l2_device_set_name() initializes the name field of struct &v4l2_device + * using the driver name and a driver-global atomic_t instance. + * + * This function will increment the instance counter and returns the + * instance value used in the name. + * + * Example: + * + * static atomic_t drv_instance = ATOMIC_INIT(0); + * + * ... + * + * instance = v4l2_device_set_name(&\ v4l2_dev, "foo", &\ drv_instance); + * + * The first time this is called the name field will be set to foo0 and + * this function returns 0. If the name ends with a digit (e.g. cx18), + * then the name will be set to cx18-0 since cx180 would look really odd. + */ +int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename, + atomic_t *instance); + +/** + * v4l2_device_disconnect - Change V4L2 device state to disconnected. + * + * @v4l2_dev: pointer to struct v4l2_device + * + * Should be called when the USB parent disconnects. + * Since the parent disappears, this ensures that @v4l2_dev doesn't have + * an invalid parent pointer. + * + * .. note:: This function sets @v4l2_dev->dev to NULL. + */ +void v4l2_device_disconnect(struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_unregister - Unregister all sub-devices and any other + * resources related to @v4l2_dev. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +void v4l2_device_unregister(struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_register_subdev - Registers a subdev with a v4l2 device. + * + * @v4l2_dev: pointer to struct &v4l2_device + * @sd: pointer to &struct v4l2_subdev + * + * While registered, the subdev module is marked as in-use. + * + * An error is returned if the module is no longer loaded on any attempts + * to register it. + */ +int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, + struct v4l2_subdev *sd); + +/** + * v4l2_device_unregister_subdev - Unregisters a subdev with a v4l2 device. + * + * @sd: pointer to &struct v4l2_subdev + * + * .. note :: + * + * Can also be called if the subdev wasn't registered. In such + * case, it will do nothing. + */ +void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); + +/** + * __v4l2_device_register_subdev_nodes - Registers device nodes for + * all subdevs of the v4l2 device that are marked with the + * %V4L2_SUBDEV_FL_HAS_DEVNODE flag. + * + * @v4l2_dev: pointer to struct v4l2_device + * @read_only: subdevices read-only flag. True to register the subdevices + * device nodes in read-only mode, false to allow full access to the + * subdevice userspace API. + */ +int __must_check +__v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev, + bool read_only); + +/** + * v4l2_device_register_subdev_nodes - Registers subdevices device nodes with + * unrestricted access to the subdevice userspace operations + * + * Internally calls __v4l2_device_register_subdev_nodes(). See its documentation + * for more details. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline int __must_check +v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) +{ +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + return __v4l2_device_register_subdev_nodes(v4l2_dev, false); +#else + return 0; +#endif +} + +/** + * v4l2_device_register_ro_subdev_nodes - Registers subdevices device nodes + * in read-only mode + * + * Internally calls __v4l2_device_register_subdev_nodes(). See its documentation + * for more details. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline int __must_check +v4l2_device_register_ro_subdev_nodes(struct v4l2_device *v4l2_dev) +{ +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + return __v4l2_device_register_subdev_nodes(v4l2_dev, true); +#else + return 0; +#endif +} + +/** + * v4l2_subdev_notify - Sends a notification to v4l2_device. + * + * @sd: pointer to &struct v4l2_subdev + * @notification: type of notification. Please notice that the notification + * type is driver-specific. + * @arg: arguments for the notification. Those are specific to each + * notification type. + */ +static inline void v4l2_subdev_notify(struct v4l2_subdev *sd, + unsigned int notification, void *arg) +{ + if (sd && sd->v4l2_dev && sd->v4l2_dev->notify) + sd->v4l2_dev->notify(sd, notification, arg); +} + +/** + * v4l2_device_supports_requests - Test if requests are supported. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline bool v4l2_device_supports_requests(struct v4l2_device *v4l2_dev) +{ + return v4l2_dev->mdev && v4l2_dev->mdev->ops && + v4l2_dev->mdev->ops->req_queue; +} + +/* Helper macros to iterate over all subdevs. */ + +/** + * v4l2_device_for_each_subdev - Helper macro that interates over all + * sub-devices of a given &v4l2_device. + * + * @sd: pointer that will be filled by the macro with all + * &struct v4l2_subdev pointer used as an iterator by the loop. + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * + * This macro iterates over all sub-devices owned by the @v4l2_dev device. + * It acts as a for loop iterator and executes the next statement with + * the @sd variable pointing to each sub-device in turn. + */ +#define v4l2_device_for_each_subdev(sd, v4l2_dev) \ + list_for_each_entry(sd, &(v4l2_dev)->subdevs, list) + +/** + * __v4l2_device_call_subdevs_p - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @sd: pointer that will be filled by the macro with all + * &struct v4l2_subdev pointer used as an iterator by the loop. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs_p(v4l2_dev, sd, cond, o, f, args...) \ + do { \ + list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) \ + if ((cond) && (sd)->ops->o && (sd)->ops->o->f) \ + (sd)->ops->o->f((sd) , ##args); \ + } while (0) + +/** + * __v4l2_device_call_subdevs - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs(v4l2_dev, cond, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + \ + __v4l2_device_call_subdevs_p(v4l2_dev, __sd, cond, o, \ + f , ##args); \ + } while (0) + +/** + * __v4l2_device_call_subdevs_until_err_p - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @sd: pointer that will be filled by the macro with all + * &struct v4l2_subdev sub-devices associated with @v4l2_dev. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, zero + * otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs_until_err_p(v4l2_dev, sd, cond, o, f, args...) \ +({ \ + long __err = 0; \ + \ + list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) { \ + if ((cond) && (sd)->ops->o && (sd)->ops->o->f) \ + __err = (sd)->ops->o->f((sd) , ##args); \ + if (__err && __err != -ENOIOCTLCMD) \ + break; \ + } \ + (__err == -ENOIOCTLCMD) ? 0 : __err; \ +}) + +/** + * __v4l2_device_call_subdevs_until_err - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, + * zero otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs_until_err(v4l2_dev, cond, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o, \ + f , ##args); \ +}) + +/** + * v4l2_device_call_all - Calls the specified operation for + * all subdevs matching the &v4l2_subdev.grp_id, as assigned + * by the bridge driver. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpid: &struct v4l2_subdev->grp_id group ID to match. + * Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_call_all(v4l2_dev, grpid, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + \ + __v4l2_device_call_subdevs_p(v4l2_dev, __sd, \ + (grpid) == 0 || __sd->grp_id == (grpid), o, f , \ + ##args); \ + } while (0) + +/** + * v4l2_device_call_until_err - Calls the specified operation for + * all subdevs matching the &v4l2_subdev.grp_id, as assigned + * by the bridge driver, until an error occurs. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpid: &struct v4l2_subdev->grp_id group ID to match. + * Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, + * zero otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_call_until_err(v4l2_dev, grpid, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, \ + (grpid) == 0 || __sd->grp_id == (grpid), o, f , \ + ##args); \ +}) + +/** + * v4l2_device_mask_call_all - Calls the specified operation for + * all subdevices where a group ID matches a specified bitmask. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id + * group ID to be matched. Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_mask_call_all(v4l2_dev, grpmsk, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + \ + __v4l2_device_call_subdevs_p(v4l2_dev, __sd, \ + (grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o, \ + f , ##args); \ + } while (0) + +/** + * v4l2_device_mask_call_until_err - Calls the specified operation for + * all subdevices where a group ID matches a specified bitmask. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id + * group ID to be matched. Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, + * zero otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_mask_call_until_err(v4l2_dev, grpmsk, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, \ + (grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o, \ + f , ##args); \ +}) + + +/** + * v4l2_device_has_op - checks if any subdev with matching grpid has a + * given ops. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpid: &struct v4l2_subdev->grp_id group ID to match. + * Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + */ +#define v4l2_device_has_op(v4l2_dev, grpid, o, f) \ +({ \ + struct v4l2_subdev *__sd; \ + bool __result = false; \ + list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list) { \ + if ((grpid) && __sd->grp_id != (grpid)) \ + continue; \ + if (v4l2_subdev_has_op(__sd, o, f)) { \ + __result = true; \ + break; \ + } \ + } \ + __result; \ +}) + +/** + * v4l2_device_mask_has_op - checks if any subdev with matching group + * mask has a given ops. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id + * group ID to be matched. Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + */ +#define v4l2_device_mask_has_op(v4l2_dev, grpmsk, o, f) \ +({ \ + struct v4l2_subdev *__sd; \ + bool __result = false; \ + list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list) { \ + if ((grpmsk) && !(__sd->grp_id & (grpmsk))) \ + continue; \ + if (v4l2_subdev_has_op(__sd, o, f)) { \ + __result = true; \ + break; \ + } \ + } \ + __result; \ +}) + +#endif -- cgit v1.2.3