From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/media/v4l2-fwnode.h | 484 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 484 insertions(+) create mode 100644 include/media/v4l2-fwnode.h (limited to 'include/media/v4l2-fwnode.h') diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h new file mode 100644 index 000000000..394d798f3 --- /dev/null +++ b/include/media/v4l2-fwnode.h @@ -0,0 +1,484 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * V4L2 fwnode binding parsing library + * + * Copyright (c) 2016 Intel Corporation. + * Author: Sakari Ailus + * + * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + * + * Copyright (C) 2012 Renesas Electronics Corp. + * Author: Guennadi Liakhovetski + */ +#ifndef _V4L2_FWNODE_H +#define _V4L2_FWNODE_H + +#include +#include +#include +#include + +#include + +struct fwnode_handle; +struct v4l2_async_notifier; +struct v4l2_async_subdev; + +/** + * struct v4l2_fwnode_endpoint - the endpoint data structure + * @base: fwnode endpoint of the v4l2_fwnode + * @bus_type: bus type + * @bus: bus configuration data structure + * @bus.parallel: embedded &struct v4l2_mbus_config_parallel. + * Used if the bus is parallel. + * @bus.mipi_csi1: embedded &struct v4l2_mbus_config_mipi_csi1. + * Used if the bus is MIPI Alliance's Camera Serial + * Interface version 1 (MIPI CSI1) or Standard + * Mobile Imaging Architecture's Compact Camera Port 2 + * (SMIA CCP2). + * @bus.mipi_csi2: embedded &struct v4l2_mbus_config_mipi_csi2. + * Used if the bus is MIPI Alliance's Camera Serial + * Interface version 2 (MIPI CSI2). + * @link_frequencies: array of supported link frequencies + * @nr_of_link_frequencies: number of elements in link_frequenccies array + */ +struct v4l2_fwnode_endpoint { + struct fwnode_endpoint base; + enum v4l2_mbus_type bus_type; + struct { + struct v4l2_mbus_config_parallel parallel; + struct v4l2_mbus_config_mipi_csi1 mipi_csi1; + struct v4l2_mbus_config_mipi_csi2 mipi_csi2; + } bus; + u64 *link_frequencies; + unsigned int nr_of_link_frequencies; +}; + +/** + * V4L2_FWNODE_PROPERTY_UNSET - identify a non initialized property + * + * All properties in &struct v4l2_fwnode_device_properties are initialized + * to this value. + */ +#define V4L2_FWNODE_PROPERTY_UNSET (-1U) + +/** + * enum v4l2_fwnode_orientation - possible device orientation + * @V4L2_FWNODE_ORIENTATION_FRONT: device installed on the front side + * @V4L2_FWNODE_ORIENTATION_BACK: device installed on the back side + * @V4L2_FWNODE_ORIENTATION_EXTERNAL: device externally located + */ +enum v4l2_fwnode_orientation { + V4L2_FWNODE_ORIENTATION_FRONT, + V4L2_FWNODE_ORIENTATION_BACK, + V4L2_FWNODE_ORIENTATION_EXTERNAL +}; + +/** + * struct v4l2_fwnode_device_properties - fwnode device properties + * @orientation: device orientation. See &enum v4l2_fwnode_orientation + * @rotation: device rotation + */ +struct v4l2_fwnode_device_properties { + enum v4l2_fwnode_orientation orientation; + unsigned int rotation; +}; + +/** + * struct v4l2_fwnode_link - a link between two endpoints + * @local_node: pointer to device_node of this endpoint + * @local_port: identifier of the port this endpoint belongs to + * @local_id: identifier of the id this endpoint belongs to + * @remote_node: pointer to device_node of the remote endpoint + * @remote_port: identifier of the port the remote endpoint belongs to + * @remote_id: identifier of the id the remote endpoint belongs to + */ +struct v4l2_fwnode_link { + struct fwnode_handle *local_node; + unsigned int local_port; + unsigned int local_id; + struct fwnode_handle *remote_node; + unsigned int remote_port; + unsigned int remote_id; +}; + +/** + * enum v4l2_connector_type - connector type + * @V4L2_CONN_UNKNOWN: unknown connector type, no V4L2 connector configuration + * @V4L2_CONN_COMPOSITE: analog composite connector + * @V4L2_CONN_SVIDEO: analog svideo connector + */ +enum v4l2_connector_type { + V4L2_CONN_UNKNOWN, + V4L2_CONN_COMPOSITE, + V4L2_CONN_SVIDEO, +}; + +/** + * struct v4l2_connector_link - connector link data structure + * @head: structure to be used to add the link to the + * &struct v4l2_fwnode_connector + * @fwnode_link: &struct v4l2_fwnode_link link between the connector and the + * device the connector belongs to. + */ +struct v4l2_connector_link { + struct list_head head; + struct v4l2_fwnode_link fwnode_link; +}; + +/** + * struct v4l2_fwnode_connector_analog - analog connector data structure + * @sdtv_stds: sdtv standards this connector supports, set to V4L2_STD_ALL + * if no restrictions are specified. + */ +struct v4l2_fwnode_connector_analog { + v4l2_std_id sdtv_stds; +}; + +/** + * struct v4l2_fwnode_connector - the connector data structure + * @name: the connector device name + * @label: optional connector label + * @type: connector type + * @links: list of all connector &struct v4l2_connector_link links + * @nr_of_links: total number of links + * @connector: connector configuration + * @connector.analog: analog connector configuration + * &struct v4l2_fwnode_connector_analog + */ +struct v4l2_fwnode_connector { + const char *name; + const char *label; + enum v4l2_connector_type type; + struct list_head links; + unsigned int nr_of_links; + + union { + struct v4l2_fwnode_connector_analog analog; + /* future connectors */ + } connector; +}; + +/** + * enum v4l2_fwnode_bus_type - Video bus types defined by firmware properties + * @V4L2_FWNODE_BUS_TYPE_GUESS: Default value if no bus-type fwnode property + * @V4L2_FWNODE_BUS_TYPE_CSI2_CPHY: MIPI CSI-2 bus, C-PHY physical layer + * @V4L2_FWNODE_BUS_TYPE_CSI1: MIPI CSI-1 bus + * @V4L2_FWNODE_BUS_TYPE_CCP2: SMIA Compact Camera Port 2 bus + * @V4L2_FWNODE_BUS_TYPE_CSI2_DPHY: MIPI CSI-2 bus, D-PHY physical layer + * @V4L2_FWNODE_BUS_TYPE_PARALLEL: Camera Parallel Interface bus + * @V4L2_FWNODE_BUS_TYPE_BT656: BT.656 video format bus-type + * @V4L2_FWNODE_BUS_TYPE_DPI: Video Parallel Interface bus + * @NR_OF_V4L2_FWNODE_BUS_TYPE: Number of bus-types + */ +enum v4l2_fwnode_bus_type { + V4L2_FWNODE_BUS_TYPE_GUESS = 0, + V4L2_FWNODE_BUS_TYPE_CSI2_CPHY, + V4L2_FWNODE_BUS_TYPE_CSI1, + V4L2_FWNODE_BUS_TYPE_CCP2, + V4L2_FWNODE_BUS_TYPE_CSI2_DPHY, + V4L2_FWNODE_BUS_TYPE_PARALLEL, + V4L2_FWNODE_BUS_TYPE_BT656, + V4L2_FWNODE_BUS_TYPE_DPI, + NR_OF_V4L2_FWNODE_BUS_TYPE +}; + +/** + * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties + * @fwnode: pointer to the endpoint's fwnode handle + * @vep: pointer to the V4L2 fwnode data structure + * + * This function parses the V4L2 fwnode endpoint specific parameters from the + * firmware. There are two ways to use this function, either by letting it + * obtain the type of the bus (by setting the @vep.bus_type field to + * V4L2_MBUS_UNKNOWN) or specifying the bus type explicitly to one of the &enum + * v4l2_mbus_type types. + * + * When @vep.bus_type is V4L2_MBUS_UNKNOWN, the function will use the "bus-type" + * property to determine the type when it is available. The caller is + * responsible for validating the contents of @vep.bus_type field after the call + * returns. + * + * As a deprecated functionality to support older DT bindings without "bus-type" + * property for devices that support multiple types, if the "bus-type" property + * does not exist, the function will attempt to guess the type based on the + * endpoint properties available. NEVER RELY ON GUESSING THE BUS TYPE IN NEW + * DRIVERS OR BINDINGS. + * + * It is also possible to set @vep.bus_type corresponding to an actual bus. In + * this case the function will only attempt to parse properties related to this + * bus, and it will return an error if the value of the "bus-type" property + * corresponds to a different bus. + * + * The caller is required to initialise all fields of @vep, either with + * explicitly values, or by zeroing them. + * + * The function does not change the V4L2 fwnode endpoint state if it fails. + * + * NOTE: This function does not parse "link-frequencies" property as its size is + * not known in advance. Please use v4l2_fwnode_endpoint_alloc_parse() if you + * need properties of variable size. + * + * Return: %0 on success or a negative error code on failure: + * %-ENOMEM on memory allocation failure + * %-EINVAL on parsing failure + * %-ENXIO on mismatching bus types + */ +int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode, + struct v4l2_fwnode_endpoint *vep); + +/** + * v4l2_fwnode_endpoint_free() - free the V4L2 fwnode acquired by + * v4l2_fwnode_endpoint_alloc_parse() + * @vep: the V4L2 fwnode the resources of which are to be released + * + * It is safe to call this function with NULL argument or on a V4L2 fwnode the + * parsing of which failed. + */ +void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep); + +/** + * v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties + * @fwnode: pointer to the endpoint's fwnode handle + * @vep: pointer to the V4L2 fwnode data structure + * + * This function parses the V4L2 fwnode endpoint specific parameters from the + * firmware. There are two ways to use this function, either by letting it + * obtain the type of the bus (by setting the @vep.bus_type field to + * V4L2_MBUS_UNKNOWN) or specifying the bus type explicitly to one of the &enum + * v4l2_mbus_type types. + * + * When @vep.bus_type is V4L2_MBUS_UNKNOWN, the function will use the "bus-type" + * property to determine the type when it is available. The caller is + * responsible for validating the contents of @vep.bus_type field after the call + * returns. + * + * As a deprecated functionality to support older DT bindings without "bus-type" + * property for devices that support multiple types, if the "bus-type" property + * does not exist, the function will attempt to guess the type based on the + * endpoint properties available. NEVER RELY ON GUESSING THE BUS TYPE IN NEW + * DRIVERS OR BINDINGS. + * + * It is also possible to set @vep.bus_type corresponding to an actual bus. In + * this case the function will only attempt to parse properties related to this + * bus, and it will return an error if the value of the "bus-type" property + * corresponds to a different bus. + * + * The caller is required to initialise all fields of @vep, either with + * explicitly values, or by zeroing them. + * + * The function does not change the V4L2 fwnode endpoint state if it fails. + * + * v4l2_fwnode_endpoint_alloc_parse() has two important differences to + * v4l2_fwnode_endpoint_parse(): + * + * 1. It also parses variable size data. + * + * 2. The memory it has allocated to store the variable size data must be freed + * using v4l2_fwnode_endpoint_free() when no longer needed. + * + * Return: %0 on success or a negative error code on failure: + * %-ENOMEM on memory allocation failure + * %-EINVAL on parsing failure + * %-ENXIO on mismatching bus types + */ +int v4l2_fwnode_endpoint_alloc_parse(struct fwnode_handle *fwnode, + struct v4l2_fwnode_endpoint *vep); + +/** + * v4l2_fwnode_parse_link() - parse a link between two endpoints + * @fwnode: pointer to the endpoint's fwnode at the local end of the link + * @link: pointer to the V4L2 fwnode link data structure + * + * Fill the link structure with the local and remote nodes and port numbers. + * The local_node and remote_node fields are set to point to the local and + * remote port's parent nodes respectively (the port parent node being the + * parent node of the port node if that node isn't a 'ports' node, or the + * grand-parent node of the port node otherwise). + * + * A reference is taken to both the local and remote nodes, the caller must use + * v4l2_fwnode_put_link() to drop the references when done with the + * link. + * + * Return: 0 on success, or -ENOLINK if the remote endpoint fwnode can't be + * found. + */ +int v4l2_fwnode_parse_link(struct fwnode_handle *fwnode, + struct v4l2_fwnode_link *link); + +/** + * v4l2_fwnode_put_link() - drop references to nodes in a link + * @link: pointer to the V4L2 fwnode link data structure + * + * Drop references to the local and remote nodes in the link. This function + * must be called on every link parsed with v4l2_fwnode_parse_link(). + */ +void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link); + +/** + * v4l2_fwnode_connector_free() - free the V4L2 connector acquired memory + * @connector: the V4L2 connector resources of which are to be released + * + * Free all allocated memory and put all links acquired by + * v4l2_fwnode_connector_parse() and v4l2_fwnode_connector_add_link(). + * + * It is safe to call this function with NULL argument or on a V4L2 connector + * the parsing of which failed. + */ +void v4l2_fwnode_connector_free(struct v4l2_fwnode_connector *connector); + +/** + * v4l2_fwnode_connector_parse() - initialize the 'struct v4l2_fwnode_connector' + * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector + * is connected to or to the connector endpoint fwnode handle. + * @connector: pointer to the V4L2 fwnode connector data structure + * + * Fill the &struct v4l2_fwnode_connector with the connector type, label and + * all &enum v4l2_connector_type specific connector data. The label is optional + * so it is set to %NULL if no one was found. The function initialize the links + * to zero. Adding links to the connector is done by calling + * v4l2_fwnode_connector_add_link(). + * + * The memory allocated for the label must be freed when no longer needed. + * Freeing the memory is done by v4l2_fwnode_connector_free(). + * + * Return: + * * %0 on success or a negative error code on failure: + * * %-EINVAL if @fwnode is invalid + * * %-ENOTCONN if connector type is unknown or connector device can't be found + */ +int v4l2_fwnode_connector_parse(struct fwnode_handle *fwnode, + struct v4l2_fwnode_connector *connector); + +/** + * v4l2_fwnode_connector_add_link - add a link between a connector node and + * a v4l2-subdev node. + * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector + * is connected to + * @connector: pointer to the V4L2 fwnode connector data structure + * + * Add a new &struct v4l2_connector_link link to the + * &struct v4l2_fwnode_connector connector links list. The link local_node + * points to the connector node, the remote_node to the host v4l2 (sub)dev. + * + * The taken references to remote_node and local_node must be dropped and the + * allocated memory must be freed when no longer needed. Both is done by calling + * v4l2_fwnode_connector_free(). + * + * Return: + * * %0 on success or a negative error code on failure: + * * %-EINVAL if @fwnode or @connector is invalid or @connector type is unknown + * * %-ENOMEM on link memory allocation failure + * * %-ENOTCONN if remote connector device can't be found + * * %-ENOLINK if link parsing between v4l2 (sub)dev and connector fails + */ +int v4l2_fwnode_connector_add_link(struct fwnode_handle *fwnode, + struct v4l2_fwnode_connector *connector); + +/** + * v4l2_fwnode_device_parse() - parse fwnode device properties + * @dev: pointer to &struct device + * @props: pointer to &struct v4l2_fwnode_device_properties where to store the + * parsed properties values + * + * This function parses and validates the V4L2 fwnode device properties from the + * firmware interface, and fills the @struct v4l2_fwnode_device_properties + * provided by the caller. + * + * Return: + * % 0 on success + * %-EINVAL if a parsed property value is not valid + */ +int v4l2_fwnode_device_parse(struct device *dev, + struct v4l2_fwnode_device_properties *props); + +/** + * typedef parse_endpoint_func - Driver's callback function to be called on + * each V4L2 fwnode endpoint. + * + * @dev: pointer to &struct device + * @vep: pointer to &struct v4l2_fwnode_endpoint + * @asd: pointer to &struct v4l2_async_subdev + * + * Return: + * * %0 on success + * * %-ENOTCONN if the endpoint is to be skipped but this + * should not be considered as an error + * * %-EINVAL if the endpoint configuration is invalid + */ +typedef int (*parse_endpoint_func)(struct device *dev, + struct v4l2_fwnode_endpoint *vep, + struct v4l2_async_subdev *asd); + +/** + * v4l2_async_nf_parse_fwnode_endpoints - Parse V4L2 fwnode endpoints in a + * device node + * @dev: the device the endpoints of which are to be parsed + * @notifier: notifier for @dev + * @asd_struct_size: size of the driver's async sub-device struct, including + * sizeof(struct v4l2_async_subdev). The &struct + * v4l2_async_subdev shall be the first member of + * the driver's async sub-device struct, i.e. both + * begin at the same memory address. + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode + * endpoint. Optional. + * + * DEPRECATED! This function is deprecated. Don't use it in new drivers. + * Instead see an example in cio2_parse_firmware() function in + * drivers/media/pci/intel/ipu3/ipu3-cio2.c . + * + * Parse the fwnode endpoints of the @dev device and populate the async sub- + * devices list in the notifier. The @parse_endpoint callback function is + * called for each endpoint with the corresponding async sub-device pointer to + * let the caller initialize the driver-specific part of the async sub-device + * structure. + * + * The notifier memory shall be zeroed before this function is called on the + * notifier. + * + * This function may not be called on a registered notifier and may be called on + * a notifier only once. + * + * The &struct v4l2_fwnode_endpoint passed to the callback function + * @parse_endpoint is released once the function is finished. If there is a need + * to retain that configuration, the user needs to allocate memory for it. + * + * Any notifier populated using this function must be released with a call to + * v4l2_async_nf_cleanup() after it has been unregistered and the async + * sub-devices are no longer in use, even if the function returned an error. + * + * Return: %0 on success, including when no async sub-devices are found + * %-ENOMEM if memory allocation failed + * %-EINVAL if graph or endpoint parsing failed + * Other error codes as returned by @parse_endpoint + */ +int +v4l2_async_nf_parse_fwnode_endpoints(struct device *dev, + struct v4l2_async_notifier *notifier, + size_t asd_struct_size, + parse_endpoint_func parse_endpoint); + +/* Helper macros to access the connector links. */ + +/** v4l2_connector_last_link - Helper macro to get the first + * &struct v4l2_fwnode_connector link + * @v4l2c: &struct v4l2_fwnode_connector owning the connector links + * + * This marco returns the first added &struct v4l2_connector_link connector + * link or @NULL if the connector has no links. + */ +#define v4l2_connector_first_link(v4l2c) \ + list_first_entry_or_null(&(v4l2c)->links, \ + struct v4l2_connector_link, head) + +/** v4l2_connector_last_link - Helper macro to get the last + * &struct v4l2_fwnode_connector link + * @v4l2c: &struct v4l2_fwnode_connector owning the connector links + * + * This marco returns the last &struct v4l2_connector_link added connector link. + */ +#define v4l2_connector_last_link(v4l2c) \ + list_last_entry(&(v4l2c)->links, struct v4l2_connector_link, head) + +#endif /* _V4L2_FWNODE_H */ -- cgit v1.2.3