From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/misc/cxl.h | 265 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 265 insertions(+) create mode 100644 include/misc/cxl.h (limited to 'include/misc/cxl.h') diff --git a/include/misc/cxl.h b/include/misc/cxl.h new file mode 100644 index 000000000..d8044299d --- /dev/null +++ b/include/misc/cxl.h @@ -0,0 +1,265 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2015 IBM Corp. + */ + +#ifndef _MISC_CXL_H +#define _MISC_CXL_H + +#include +#include +#include +#include + +/* + * This documents the in kernel API for driver to use CXL. It allows kernel + * drivers to bind to AFUs using an AFU configuration record exposed as a PCI + * configuration record. + * + * This API enables control over AFU and contexts which can't be part of the + * generic PCI API. This API is agnostic to the actual AFU. + */ + +/* Get the AFU associated with a pci_dev */ +struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev); + +/* Get the AFU conf record number associated with a pci_dev */ +unsigned int cxl_pci_to_cfg_record(struct pci_dev *dev); + + +/* + * Context lifetime overview: + * + * An AFU context may be inited and then started and stopped multiple times + * before it's released. ie. + * - cxl_dev_context_init() + * - cxl_start_context() + * - cxl_stop_context() + * - cxl_start_context() + * - cxl_stop_context() + * ...repeat... + * - cxl_release_context() + * Once released, a context can't be started again. + * + * One context is inited by the cxl driver for every pci_dev. This is to be + * used as a default kernel context. cxl_get_context() will get this + * context. This context will be released by PCI hot unplug, so doesn't need to + * be released explicitly by drivers. + * + * Additional kernel contexts may be inited using cxl_dev_context_init(). + * These must be released using cxl_context_detach(). + * + * Once a context has been inited, IRQs may be configured. Firstly these IRQs + * must be allocated (cxl_allocate_afu_irqs()), then individually mapped to + * specific handlers (cxl_map_afu_irq()). + * + * These IRQs can be unmapped (cxl_unmap_afu_irq()) and finally released + * (cxl_free_afu_irqs()). + * + * The AFU can be reset (cxl_afu_reset()). This will cause the PSL/AFU + * hardware to lose track of all contexts. It's upto the caller of + * cxl_afu_reset() to restart these contexts. + */ + +/* + * On pci_enabled_device(), the cxl driver will init a single cxl context for + * use by the driver. It doesn't start this context (as that will likely + * generate DMA traffic for most AFUs). + * + * This gets the default context associated with this pci_dev. This context + * doesn't need to be released as this will be done by the PCI subsystem on hot + * unplug. + */ +struct cxl_context *cxl_get_context(struct pci_dev *dev); +/* + * Allocate and initalise a context associated with a AFU PCI device. This + * doesn't start the context in the AFU. + */ +struct cxl_context *cxl_dev_context_init(struct pci_dev *dev); +/* + * Release and free a context. Context should be stopped before calling. + */ +int cxl_release_context(struct cxl_context *ctx); + +/* + * Set and get private data associated with a context. Allows drivers to have a + * back pointer to some useful structure. + */ +int cxl_set_priv(struct cxl_context *ctx, void *priv); +void *cxl_get_priv(struct cxl_context *ctx); + +/* + * Allocate AFU interrupts for this context. num=0 will allocate the default + * for this AFU as given in the AFU descriptor. This number doesn't include the + * interrupt 0 (CAIA defines AFU IRQ 0 for page faults). Each interrupt to be + * used must map a handler with cxl_map_afu_irq. + */ +int cxl_allocate_afu_irqs(struct cxl_context *cxl, int num); +/* Free allocated interrupts */ +void cxl_free_afu_irqs(struct cxl_context *cxl); + +/* + * Map a handler for an AFU interrupt associated with a particular context. AFU + * IRQS numbers start from 1 (CAIA defines AFU IRQ 0 for page faults). cookie + * is private data is that will be provided to the interrupt handler. + */ +int cxl_map_afu_irq(struct cxl_context *cxl, int num, + irq_handler_t handler, void *cookie, char *name); +/* unmap mapped IRQ handlers */ +void cxl_unmap_afu_irq(struct cxl_context *cxl, int num, void *cookie); + +/* + * Start work on the AFU. This starts an cxl context and associates it with a + * task. task == NULL will make it a kernel context. + */ +int cxl_start_context(struct cxl_context *ctx, u64 wed, + struct task_struct *task); +/* + * Stop a context and remove it from the PSL + */ +int cxl_stop_context(struct cxl_context *ctx); + +/* Reset the AFU */ +int cxl_afu_reset(struct cxl_context *ctx); + +/* + * Set a context as a master context. + * This sets the default problem space area mapped as the full space, rather + * than just the per context area (for slaves). + */ +void cxl_set_master(struct cxl_context *ctx); + +/* + * Map and unmap the AFU Problem Space area. The amount and location mapped + * depends on if this context is a master or slave. + */ +void __iomem *cxl_psa_map(struct cxl_context *ctx); +void cxl_psa_unmap(void __iomem *addr); + +/* Get the process element for this context */ +int cxl_process_element(struct cxl_context *ctx); + +/* + * These calls allow drivers to create their own file descriptors and make them + * identical to the cxl file descriptor user API. An example use case: + * + * struct file_operations cxl_my_fops = {}; + * ...... + * // Init the context + * ctx = cxl_dev_context_init(dev); + * if (IS_ERR(ctx)) + * return PTR_ERR(ctx); + * // Create and attach a new file descriptor to my file ops + * file = cxl_get_fd(ctx, &cxl_my_fops, &fd); + * // Start context + * rc = cxl_start_work(ctx, &work.work); + * if (rc) { + * fput(file); + * put_unused_fd(fd); + * return -ENODEV; + * } + * // No error paths after installing the fd + * fd_install(fd, file); + * return fd; + * + * This inits a context, and gets a file descriptor and associates some file + * ops to that file descriptor. If the file ops are blank, the cxl driver will + * fill them in with the default ones that mimic the standard user API. Once + * completed, the file descriptor can be installed. Once the file descriptor is + * installed, it's visible to the user so no errors must occur past this point. + * + * If cxl_fd_release() file op call is installed, the context will be stopped + * and released when the fd is released. Hence the driver won't need to manage + * this itself. + */ + +/* + * Take a context and associate it with my file ops. Returns the associated + * file and file descriptor. Any file ops which are blank are filled in by the + * cxl driver with the default ops to mimic the standard API. + */ +struct file *cxl_get_fd(struct cxl_context *ctx, struct file_operations *fops, + int *fd); +/* Get the context associated with this file */ +struct cxl_context *cxl_fops_get_context(struct file *file); +/* + * Start a context associated a struct cxl_ioctl_start_work used by the + * standard cxl user API. + */ +int cxl_start_work(struct cxl_context *ctx, + struct cxl_ioctl_start_work *work); +/* + * Export all the existing fops so drivers can use them + */ +int cxl_fd_open(struct inode *inode, struct file *file); +int cxl_fd_release(struct inode *inode, struct file *file); +long cxl_fd_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +int cxl_fd_mmap(struct file *file, struct vm_area_struct *vm); +__poll_t cxl_fd_poll(struct file *file, struct poll_table_struct *poll); +ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count, + loff_t *off); + +/* + * For EEH, a driver may want to assert a PERST will reload the same image + * from flash into the FPGA. + * + * This is a property of the entire adapter, not a single AFU, so drivers + * should set this property with care! + */ +void cxl_perst_reloads_same_image(struct cxl_afu *afu, + bool perst_reloads_same_image); + +/* + * Read the VPD for the card where the AFU resides + */ +ssize_t cxl_read_adapter_vpd(struct pci_dev *dev, void *buf, size_t count); + +/* + * AFU driver ops allow an AFU driver to create their own events to pass to + * userspace through the file descriptor as a simpler alternative to overriding + * the read() and poll() calls that works with the generic cxl events. These + * events are given priority over the generic cxl events, so they will be + * delivered first if multiple types of events are pending. + * + * The AFU driver must call cxl_context_events_pending() to notify the cxl + * driver that new events are ready to be delivered for a specific context. + * cxl_context_events_pending() will adjust the current count of AFU driver + * events for this context, and wake up anyone waiting on the context wait + * queue. + * + * The cxl driver will then call fetch_event() to get a structure defining + * the size and address of the driver specific event data. The cxl driver + * will build a cxl header with type and process_element fields filled in, + * and header.size set to sizeof(struct cxl_event_header) + data_size. + * The total size of the event is limited to CXL_READ_MIN_SIZE (4K). + * + * fetch_event() is called with a spin lock held, so it must not sleep. + * + * The cxl driver will then deliver the event to userspace, and finally + * call event_delivered() to return the status of the operation, identified + * by cxl context and AFU driver event data pointers. + * 0 Success + * -EFAULT copy_to_user() has failed + * -EINVAL Event data pointer is NULL, or event size is greater than + * CXL_READ_MIN_SIZE. + */ +struct cxl_afu_driver_ops { + struct cxl_event_afu_driver_reserved *(*fetch_event) ( + struct cxl_context *ctx); + void (*event_delivered) (struct cxl_context *ctx, + struct cxl_event_afu_driver_reserved *event, + int rc); +}; + +/* + * Associate the above driver ops with a specific context. + * Reset the current count of AFU driver events. + */ +void cxl_set_driver_ops(struct cxl_context *ctx, + struct cxl_afu_driver_ops *ops); + +/* Notify cxl driver that new events are ready to be delivered for context */ +void cxl_context_events_pending(struct cxl_context *ctx, + unsigned int new_events); + +#endif /* _MISC_CXL_H */ -- cgit v1.2.3