From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/net/mac802154.h | 489 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 489 insertions(+) create mode 100644 include/net/mac802154.h (limited to 'include/net/mac802154.h') diff --git a/include/net/mac802154.h b/include/net/mac802154.h new file mode 100644 index 000000000..4a3a9de9d --- /dev/null +++ b/include/net/mac802154.h @@ -0,0 +1,489 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IEEE802.15.4-2003 specification + * + * Copyright (C) 2007-2012 Siemens AG + */ +#ifndef NET_MAC802154_H +#define NET_MAC802154_H + +#include +#include +#include +#include + +#include + +/** + * enum ieee802154_hw_addr_filt_flags - hardware address filtering flags + * + * The following flags are used to indicate changed address settings from + * the stack to the hardware. + * + * @IEEE802154_AFILT_SADDR_CHANGED: Indicates that the short address will be + * change. + * + * @IEEE802154_AFILT_IEEEADDR_CHANGED: Indicates that the extended address + * will be change. + * + * @IEEE802154_AFILT_PANID_CHANGED: Indicates that the pan id will be change. + * + * @IEEE802154_AFILT_PANC_CHANGED: Indicates that the address filter will + * do frame address filtering as a pan coordinator. + */ +enum ieee802154_hw_addr_filt_flags { + IEEE802154_AFILT_SADDR_CHANGED = BIT(0), + IEEE802154_AFILT_IEEEADDR_CHANGED = BIT(1), + IEEE802154_AFILT_PANID_CHANGED = BIT(2), + IEEE802154_AFILT_PANC_CHANGED = BIT(3), +}; + +/** + * struct ieee802154_hw_addr_filt - hardware address filtering settings + * + * @pan_id: pan_id which should be set to the hardware address filter. + * + * @short_addr: short_addr which should be set to the hardware address filter. + * + * @ieee_addr: extended address which should be set to the hardware address + * filter. + * + * @pan_coord: boolean if hardware filtering should be operate as coordinator. + */ +struct ieee802154_hw_addr_filt { + __le16 pan_id; + __le16 short_addr; + __le64 ieee_addr; + bool pan_coord; +}; + +/** + * struct ieee802154_hw - ieee802154 hardware + * + * @extra_tx_headroom: headroom to reserve in each transmit skb for use by the + * driver (e.g. for transmit headers.) + * + * @flags: hardware flags, see &enum ieee802154_hw_flags + * + * @parent: parent device of the hardware. + * + * @priv: pointer to private area that was allocated for driver use along with + * this structure. + * + * @phy: This points to the &struct wpan_phy allocated for this 802.15.4 PHY. + */ +struct ieee802154_hw { + /* filled by the driver */ + int extra_tx_headroom; + u32 flags; + struct device *parent; + void *priv; + + /* filled by mac802154 core */ + struct wpan_phy *phy; +}; + +/** + * enum ieee802154_hw_flags - hardware flags + * + * These flags are used to indicate hardware capabilities to + * the stack. Generally, flags here should have their meaning + * done in a way that the simplest hardware doesn't need setting + * any particular flags. There are some exceptions to this rule, + * however, so you are advised to review these flags carefully. + * + * @IEEE802154_HW_TX_OMIT_CKSUM: Indicates that xmitter will add FCS on it's + * own. + * + * @IEEE802154_HW_LBT: Indicates that transceiver will support listen before + * transmit. + * + * @IEEE802154_HW_CSMA_PARAMS: Indicates that transceiver will support csma + * parameters (max_be, min_be, backoff exponents). + * + * @IEEE802154_HW_FRAME_RETRIES: Indicates that transceiver will support ARET + * frame retries setting. + * + * @IEEE802154_HW_AFILT: Indicates that transceiver will support hardware + * address filter setting. + * + * @IEEE802154_HW_PROMISCUOUS: Indicates that transceiver will support + * promiscuous mode setting. + * + * @IEEE802154_HW_RX_OMIT_CKSUM: Indicates that receiver omits FCS. + */ +enum ieee802154_hw_flags { + IEEE802154_HW_TX_OMIT_CKSUM = BIT(0), + IEEE802154_HW_LBT = BIT(1), + IEEE802154_HW_CSMA_PARAMS = BIT(2), + IEEE802154_HW_FRAME_RETRIES = BIT(3), + IEEE802154_HW_AFILT = BIT(4), + IEEE802154_HW_PROMISCUOUS = BIT(5), + IEEE802154_HW_RX_OMIT_CKSUM = BIT(6), +}; + +/* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */ +#define IEEE802154_HW_OMIT_CKSUM (IEEE802154_HW_TX_OMIT_CKSUM | \ + IEEE802154_HW_RX_OMIT_CKSUM) + +/* struct ieee802154_ops - callbacks from mac802154 to the driver + * + * This structure contains various callbacks that the driver may + * handle or, in some cases, must handle, for example to transmit + * a frame. + * + * start: Handler that 802.15.4 module calls for device initialization. + * This function is called before the first interface is attached. + * + * stop: Handler that 802.15.4 module calls for device cleanup. + * This function is called after the last interface is removed. + * + * xmit_sync: + * Handler that 802.15.4 module calls for each transmitted frame. + * skb cntains the buffer starting from the IEEE 802.15.4 header. + * The low-level driver should send the frame based on available + * configuration. This is called by a workqueue and useful for + * synchronous 802.15.4 drivers. + * This function should return zero or negative errno. + * + * WARNING: + * This will be deprecated soon. We don't accept synced xmit callbacks + * drivers anymore. + * + * xmit_async: + * Handler that 802.15.4 module calls for each transmitted frame. + * skb cntains the buffer starting from the IEEE 802.15.4 header. + * The low-level driver should send the frame based on available + * configuration. + * This function should return zero or negative errno. + * + * ed: Handler that 802.15.4 module calls for Energy Detection. + * This function should place the value for detected energy + * (usually device-dependant) in the level pointer and return + * either zero or negative errno. Called with pib_lock held. + * + * set_channel: + * Set radio for listening on specific channel. + * Set the device for listening on specified channel. + * Returns either zero, or negative errno. Called with pib_lock held. + * + * set_hw_addr_filt: + * Set radio for listening on specific address. + * Set the device for listening on specified address. + * Returns either zero, or negative errno. + * + * set_txpower: + * Set radio transmit power in mBm. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_lbt + * Enables or disables listen before talk on the device. Called with + * pib_lock held. + * Returns either zero, or negative errno. + * + * set_cca_mode + * Sets the CCA mode used by the device. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_cca_ed_level + * Sets the CCA energy detection threshold in mBm. Called with pib_lock + * held. + * Returns either zero, or negative errno. + * + * set_csma_params + * Sets the CSMA parameter set for the PHY. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_frame_retries + * Sets the retransmission attempt limit. Called with pib_lock held. + * Returns either zero, or negative errno. + * + * set_promiscuous_mode + * Enables or disable promiscuous mode. + */ +struct ieee802154_ops { + struct module *owner; + int (*start)(struct ieee802154_hw *hw); + void (*stop)(struct ieee802154_hw *hw); + int (*xmit_sync)(struct ieee802154_hw *hw, + struct sk_buff *skb); + int (*xmit_async)(struct ieee802154_hw *hw, + struct sk_buff *skb); + int (*ed)(struct ieee802154_hw *hw, u8 *level); + int (*set_channel)(struct ieee802154_hw *hw, u8 page, + u8 channel); + int (*set_hw_addr_filt)(struct ieee802154_hw *hw, + struct ieee802154_hw_addr_filt *filt, + unsigned long changed); + int (*set_txpower)(struct ieee802154_hw *hw, s32 mbm); + int (*set_lbt)(struct ieee802154_hw *hw, bool on); + int (*set_cca_mode)(struct ieee802154_hw *hw, + const struct wpan_phy_cca *cca); + int (*set_cca_ed_level)(struct ieee802154_hw *hw, s32 mbm); + int (*set_csma_params)(struct ieee802154_hw *hw, + u8 min_be, u8 max_be, u8 retries); + int (*set_frame_retries)(struct ieee802154_hw *hw, + s8 retries); + int (*set_promiscuous_mode)(struct ieee802154_hw *hw, + const bool on); +}; + +/** + * ieee802154_get_fc_from_skb - get the frame control field from an skb + * @skb: skb where the frame control field will be get from + */ +static inline __le16 ieee802154_get_fc_from_skb(const struct sk_buff *skb) +{ + __le16 fc; + + /* check if we can fc at skb_mac_header of sk buffer */ + if (WARN_ON(!skb_mac_header_was_set(skb) || + (skb_tail_pointer(skb) - + skb_mac_header(skb)) < IEEE802154_FC_LEN)) + return cpu_to_le16(0); + + memcpy(&fc, skb_mac_header(skb), IEEE802154_FC_LEN); + return fc; +} + +/** + * ieee802154_skb_dst_pan - get the pointer to destination pan field + * @fc: mac header frame control field + * @skb: skb where the destination pan pointer will be get from + */ +static inline unsigned char *ieee802154_skb_dst_pan(__le16 fc, + const struct sk_buff *skb) +{ + unsigned char *dst_pan; + + switch (ieee802154_daddr_mode(fc)) { + case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE): + dst_pan = NULL; + break; + case cpu_to_le16(IEEE802154_FCTL_DADDR_SHORT): + case cpu_to_le16(IEEE802154_FCTL_DADDR_EXTENDED): + dst_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN; + break; + default: + WARN_ONCE(1, "invalid addr mode detected"); + dst_pan = NULL; + break; + } + + return dst_pan; +} + +/** + * ieee802154_skb_src_pan - get the pointer to source pan field + * @fc: mac header frame control field + * @skb: skb where the source pan pointer will be get from + */ +static inline unsigned char *ieee802154_skb_src_pan(__le16 fc, + const struct sk_buff *skb) +{ + unsigned char *src_pan; + + switch (ieee802154_saddr_mode(fc)) { + case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE): + src_pan = NULL; + break; + case cpu_to_le16(IEEE802154_FCTL_SADDR_SHORT): + case cpu_to_le16(IEEE802154_FCTL_SADDR_EXTENDED): + /* if intra-pan and source addr mode is non none, + * then source pan id is equal destination pan id. + */ + if (ieee802154_is_intra_pan(fc)) { + src_pan = ieee802154_skb_dst_pan(fc, skb); + break; + } + + switch (ieee802154_daddr_mode(fc)) { + case cpu_to_le16(IEEE802154_FCTL_ADDR_NONE): + src_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN; + break; + case cpu_to_le16(IEEE802154_FCTL_DADDR_SHORT): + src_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN + + IEEE802154_PAN_ID_LEN + + IEEE802154_SHORT_ADDR_LEN; + break; + case cpu_to_le16(IEEE802154_FCTL_DADDR_EXTENDED): + src_pan = skb_mac_header(skb) + + IEEE802154_FC_LEN + + IEEE802154_SEQ_LEN + + IEEE802154_PAN_ID_LEN + + IEEE802154_EXTENDED_ADDR_LEN; + break; + default: + WARN_ONCE(1, "invalid addr mode detected"); + src_pan = NULL; + break; + } + break; + default: + WARN_ONCE(1, "invalid addr mode detected"); + src_pan = NULL; + break; + } + + return src_pan; +} + +/** + * ieee802154_skb_is_intra_pan_addressing - checks whenever the mac addressing + * is an intra pan communication + * @fc: mac header frame control field + * @skb: skb where the source and destination pan should be get from + */ +static inline bool ieee802154_skb_is_intra_pan_addressing(__le16 fc, + const struct sk_buff *skb) +{ + unsigned char *dst_pan = ieee802154_skb_dst_pan(fc, skb), + *src_pan = ieee802154_skb_src_pan(fc, skb); + + /* if one is NULL is no intra pan addressing */ + if (!dst_pan || !src_pan) + return false; + + return !memcmp(dst_pan, src_pan, IEEE802154_PAN_ID_LEN); +} + +/** + * ieee802154_be64_to_le64 - copies and convert be64 to le64 + * @le64_dst: le64 destination pointer + * @be64_src: be64 source pointer + */ +static inline void ieee802154_be64_to_le64(void *le64_dst, const void *be64_src) +{ + put_unaligned_le64(get_unaligned_be64(be64_src), le64_dst); +} + +/** + * ieee802154_le64_to_be64 - copies and convert le64 to be64 + * @be64_dst: be64 destination pointer + * @le64_src: le64 source pointer + */ +static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src) +{ + put_unaligned_be64(get_unaligned_le64(le64_src), be64_dst); +} + +/** + * ieee802154_le16_to_be16 - copies and convert le16 to be16 + * @be16_dst: be16 destination pointer + * @le16_src: le16 source pointer + */ +static inline void ieee802154_le16_to_be16(void *be16_dst, const void *le16_src) +{ + put_unaligned_be16(get_unaligned_le16(le16_src), be16_dst); +} + +/** + * ieee802154_be16_to_le16 - copies and convert be16 to le16 + * @le16_dst: le16 destination pointer + * @be16_src: be16 source pointer + */ +static inline void ieee802154_be16_to_le16(void *le16_dst, const void *be16_src) +{ + put_unaligned_le16(get_unaligned_be16(be16_src), le16_dst); +} + +/** + * ieee802154_alloc_hw - Allocate a new hardware device + * + * This must be called once for each hardware device. The returned pointer + * must be used to refer to this device when calling other functions. + * mac802154 allocates a private data area for the driver pointed to by + * @priv in &struct ieee802154_hw, the size of this area is given as + * @priv_data_len. + * + * @priv_data_len: length of private data + * @ops: callbacks for this device + * + * Return: A pointer to the new hardware device, or %NULL on error. + */ +struct ieee802154_hw * +ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops); + +/** + * ieee802154_free_hw - free hardware descriptor + * + * This function frees everything that was allocated, including the + * private data for the driver. You must call ieee802154_unregister_hw() + * before calling this function. + * + * @hw: the hardware to free + */ +void ieee802154_free_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_register_hw - Register hardware device + * + * You must call this function before any other functions in + * mac802154. Note that before a hardware can be registered, you + * need to fill the contained wpan_phy's information. + * + * @hw: the device to register as returned by ieee802154_alloc_hw() + * + * Return: 0 on success. An error code otherwise. + */ +int ieee802154_register_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_unregister_hw - Unregister a hardware device + * + * This function instructs mac802154 to free allocated resources + * and unregister netdevices from the networking subsystem. + * + * @hw: the hardware to unregister + */ +void ieee802154_unregister_hw(struct ieee802154_hw *hw); + +/** + * ieee802154_rx_irqsafe - receive frame + * + * Like ieee802154_rx() but can be called in IRQ context + * (internally defers to a tasklet.) + * + * @hw: the hardware this frame came in on + * @skb: the buffer to receive, owned by mac802154 after this call + * @lqi: link quality indicator + */ +void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, + u8 lqi); + +/** + * ieee802154_xmit_complete - frame transmission complete + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + * @ifs_handling: indicate interframe space handling + */ +void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, + bool ifs_handling); + +/** + * ieee802154_xmit_error - offloaded frame transmission failed + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + * @reason: error code + */ +void ieee802154_xmit_error(struct ieee802154_hw *hw, struct sk_buff *skb, + int reason); + +/** + * ieee802154_xmit_hw_error - frame could not be offloaded to the transmitter + * because of a hardware error (bus error, timeout, etc) + * + * @hw: pointer as obtained from ieee802154_alloc_hw(). + * @skb: buffer for transmission + */ +void ieee802154_xmit_hw_error(struct ieee802154_hw *hw, struct sk_buff *skb); + +#endif /* NET_MAC802154_H */ -- cgit v1.2.3