From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/net/netns/sctp.h | 184 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 184 insertions(+) create mode 100644 include/net/netns/sctp.h (limited to 'include/net/netns/sctp.h') diff --git a/include/net/netns/sctp.h b/include/net/netns/sctp.h new file mode 100644 index 000000000..7eff3d981 --- /dev/null +++ b/include/net/netns/sctp.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __NETNS_SCTP_H__ +#define __NETNS_SCTP_H__ + +#include +#include + +struct sock; +struct proc_dir_entry; +struct sctp_mib; +struct ctl_table_header; + +struct netns_sctp { + DEFINE_SNMP_STAT(struct sctp_mib, sctp_statistics); + +#ifdef CONFIG_PROC_FS + struct proc_dir_entry *proc_net_sctp; +#endif +#ifdef CONFIG_SYSCTL + struct ctl_table_header *sysctl_header; +#endif + /* This is the global socket data structure used for responding to + * the Out-of-the-blue (OOTB) packets. A control sock will be created + * for this socket at the initialization time. + */ + struct sock *ctl_sock; + + /* UDP tunneling listening sock. */ + struct sock *udp4_sock; + struct sock *udp6_sock; + /* UDP tunneling listening port. */ + int udp_port; + /* UDP tunneling remote encap port. */ + int encap_port; + + /* This is the global local address list. + * We actively maintain this complete list of addresses on + * the system by catching address add/delete events. + * + * It is a list of sctp_sockaddr_entry. + */ + struct list_head local_addr_list; + struct list_head addr_waitq; + struct timer_list addr_wq_timer; + struct list_head auto_asconf_splist; + /* Lock that protects both addr_waitq and auto_asconf_splist */ + spinlock_t addr_wq_lock; + + /* Lock that protects the local_addr_list writers */ + spinlock_t local_addr_lock; + + /* RFC2960 Section 14. Suggested SCTP Protocol Parameter Values + * + * The following protocol parameters are RECOMMENDED: + * + * RTO.Initial - 3 seconds + * RTO.Min - 1 second + * RTO.Max - 60 seconds + * RTO.Alpha - 1/8 (3 when converted to right shifts.) + * RTO.Beta - 1/4 (2 when converted to right shifts.) + */ + unsigned int rto_initial; + unsigned int rto_min; + unsigned int rto_max; + + /* Note: rto_alpha and rto_beta are really defined as inverse + * powers of two to facilitate integer operations. + */ + int rto_alpha; + int rto_beta; + + /* Max.Burst - 4 */ + int max_burst; + + /* Whether Cookie Preservative is enabled(1) or not(0) */ + int cookie_preserve_enable; + + /* The namespace default hmac alg */ + char *sctp_hmac_alg; + + /* Valid.Cookie.Life - 60 seconds */ + unsigned int valid_cookie_life; + + /* Delayed SACK timeout 200ms default*/ + unsigned int sack_timeout; + + /* HB.interval - 30 seconds */ + unsigned int hb_interval; + + /* The interval for PLPMTUD probe timer */ + unsigned int probe_interval; + + /* Association.Max.Retrans - 10 attempts + * Path.Max.Retrans - 5 attempts (per destination address) + * Max.Init.Retransmits - 8 attempts + */ + int max_retrans_association; + int max_retrans_path; + int max_retrans_init; + /* Potentially-Failed.Max.Retrans sysctl value + * taken from: + * http://tools.ietf.org/html/draft-nishida-tsvwg-sctp-failover-05 + */ + int pf_retrans; + + /* Primary.Switchover.Max.Retrans sysctl value + * taken from: + * https://tools.ietf.org/html/rfc7829 + */ + int ps_retrans; + + /* + * Disable Potentially-Failed feature, the feature is enabled by default + * pf_enable - 0 : disable pf + * - >0 : enable pf + */ + int pf_enable; + + /* + * Disable Potentially-Failed state exposure, ignored by default + * pf_expose - 0 : compatible with old applications (by default) + * - 1 : disable pf state exposure + * - 2 : enable pf state exposure + */ + int pf_expose; + + /* + * Policy for preforming sctp/socket accounting + * 0 - do socket level accounting, all assocs share sk_sndbuf + * 1 - do sctp accounting, each asoc may use sk_sndbuf bytes + */ + int sndbuf_policy; + + /* + * Policy for preforming sctp/socket accounting + * 0 - do socket level accounting, all assocs share sk_rcvbuf + * 1 - do sctp accounting, each asoc may use sk_rcvbuf bytes + */ + int rcvbuf_policy; + + int default_auto_asconf; + + /* Flag to indicate if addip is enabled. */ + int addip_enable; + int addip_noauth; + + /* Flag to indicate if PR-SCTP is enabled. */ + int prsctp_enable; + + /* Flag to indicate if PR-CONFIG is enabled. */ + int reconf_enable; + + /* Flag to indicate if SCTP-AUTH is enabled */ + int auth_enable; + + /* Flag to indicate if stream interleave is enabled */ + int intl_enable; + + /* Flag to indicate if ecn is enabled */ + int ecn_enable; + + /* + * Policy to control SCTP IPv4 address scoping + * 0 - Disable IPv4 address scoping + * 1 - Enable IPv4 address scoping + * 2 - Selectively allow only IPv4 private addresses + * 3 - Selectively allow only IPv4 link local address + */ + int scope_policy; + + /* Threshold for rwnd update SACKS. Receive buffer shifted this many + * bits is an indicator of when to send and window update SACK. + */ + int rwnd_upd_shift; + + /* Threshold for autoclose timeout, in seconds. */ + unsigned long max_autoclose; + +#ifdef CONFIG_NET_L3_MASTER_DEV + int l3mdev_accept; +#endif +}; + +#endif /* __NETNS_SCTP_H__ */ -- cgit v1.2.3