From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/rdma/ib_cm.h | 568 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 568 insertions(+) create mode 100644 include/rdma/ib_cm.h (limited to 'include/rdma/ib_cm.h') diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h new file mode 100644 index 000000000..a2ac62b4a --- /dev/null +++ b/include/rdma/ib_cm.h @@ -0,0 +1,568 @@ +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ +/* + * Copyright (c) 2004, 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2004 Topspin Corporation. All rights reserved. + * Copyright (c) 2004 Voltaire Corporation. All rights reserved. + * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2019, Mellanox Technologies inc. All rights reserved. + */ + +#ifndef IB_CM_H +#define IB_CM_H + +#include +#include +#include + +enum ib_cm_state { + IB_CM_IDLE, + IB_CM_LISTEN, + IB_CM_REQ_SENT, + IB_CM_REQ_RCVD, + IB_CM_MRA_REQ_SENT, + IB_CM_MRA_REQ_RCVD, + IB_CM_REP_SENT, + IB_CM_REP_RCVD, + IB_CM_MRA_REP_SENT, + IB_CM_MRA_REP_RCVD, + IB_CM_ESTABLISHED, + IB_CM_DREQ_SENT, + IB_CM_DREQ_RCVD, + IB_CM_TIMEWAIT, + IB_CM_SIDR_REQ_SENT, + IB_CM_SIDR_REQ_RCVD +}; + +enum ib_cm_lap_state { + IB_CM_LAP_UNINIT, + IB_CM_LAP_IDLE, + IB_CM_LAP_SENT, + IB_CM_LAP_RCVD, + IB_CM_MRA_LAP_SENT, + IB_CM_MRA_LAP_RCVD, +}; + +enum ib_cm_event_type { + IB_CM_REQ_ERROR, + IB_CM_REQ_RECEIVED, + IB_CM_REP_ERROR, + IB_CM_REP_RECEIVED, + IB_CM_RTU_RECEIVED, + IB_CM_USER_ESTABLISHED, + IB_CM_DREQ_ERROR, + IB_CM_DREQ_RECEIVED, + IB_CM_DREP_RECEIVED, + IB_CM_TIMEWAIT_EXIT, + IB_CM_MRA_RECEIVED, + IB_CM_REJ_RECEIVED, + IB_CM_LAP_ERROR, + IB_CM_LAP_RECEIVED, + IB_CM_APR_RECEIVED, + IB_CM_SIDR_REQ_ERROR, + IB_CM_SIDR_REQ_RECEIVED, + IB_CM_SIDR_REP_RECEIVED +}; + +enum ib_cm_data_size { + IB_CM_REQ_PRIVATE_DATA_SIZE = 92, + IB_CM_MRA_PRIVATE_DATA_SIZE = 222, + IB_CM_REJ_PRIVATE_DATA_SIZE = 148, + IB_CM_REP_PRIVATE_DATA_SIZE = 196, + IB_CM_RTU_PRIVATE_DATA_SIZE = 224, + IB_CM_DREQ_PRIVATE_DATA_SIZE = 220, + IB_CM_DREP_PRIVATE_DATA_SIZE = 224, + IB_CM_REJ_ARI_LENGTH = 72, + IB_CM_LAP_PRIVATE_DATA_SIZE = 168, + IB_CM_APR_PRIVATE_DATA_SIZE = 148, + IB_CM_APR_INFO_LENGTH = 72, + IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216, + IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136, + IB_CM_SIDR_REP_INFO_LENGTH = 72, +}; + +struct ib_cm_id; + +struct ib_cm_req_event_param { + struct ib_cm_id *listen_id; + + /* P_Key that was used by the GMP's BTH header */ + u16 bth_pkey; + + u8 port; + + struct sa_path_rec *primary_path; + struct sa_path_rec *alternate_path; + + /* + * SGID attribute of the primary path. Currently only + * useful for RoCE. Alternate path GID attributes + * are not yet supported. + */ + const struct ib_gid_attr *ppath_sgid_attr; + + __be64 remote_ca_guid; + u32 remote_qkey; + u32 remote_qpn; + enum ib_qp_type qp_type; + + u32 starting_psn; + u8 responder_resources; + u8 initiator_depth; + unsigned int local_cm_response_timeout:5; + unsigned int flow_control:1; + unsigned int remote_cm_response_timeout:5; + unsigned int retry_count:3; + unsigned int rnr_retry_count:3; + unsigned int srq:1; + struct rdma_ucm_ece ece; +}; + +struct ib_cm_rep_event_param { + __be64 remote_ca_guid; + u32 remote_qkey; + u32 remote_qpn; + u32 starting_psn; + u8 responder_resources; + u8 initiator_depth; + unsigned int target_ack_delay:5; + unsigned int failover_accepted:2; + unsigned int flow_control:1; + unsigned int rnr_retry_count:3; + unsigned int srq:1; + struct rdma_ucm_ece ece; +}; + +enum ib_cm_rej_reason { + IB_CM_REJ_NO_QP = 1, + IB_CM_REJ_NO_EEC = 2, + IB_CM_REJ_NO_RESOURCES = 3, + IB_CM_REJ_TIMEOUT = 4, + IB_CM_REJ_UNSUPPORTED = 5, + IB_CM_REJ_INVALID_COMM_ID = 6, + IB_CM_REJ_INVALID_COMM_INSTANCE = 7, + IB_CM_REJ_INVALID_SERVICE_ID = 8, + IB_CM_REJ_INVALID_TRANSPORT_TYPE = 9, + IB_CM_REJ_STALE_CONN = 10, + IB_CM_REJ_RDC_NOT_EXIST = 11, + IB_CM_REJ_INVALID_GID = 12, + IB_CM_REJ_INVALID_LID = 13, + IB_CM_REJ_INVALID_SL = 14, + IB_CM_REJ_INVALID_TRAFFIC_CLASS = 15, + IB_CM_REJ_INVALID_HOP_LIMIT = 16, + IB_CM_REJ_INVALID_PACKET_RATE = 17, + IB_CM_REJ_INVALID_ALT_GID = 18, + IB_CM_REJ_INVALID_ALT_LID = 19, + IB_CM_REJ_INVALID_ALT_SL = 20, + IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS = 21, + IB_CM_REJ_INVALID_ALT_HOP_LIMIT = 22, + IB_CM_REJ_INVALID_ALT_PACKET_RATE = 23, + IB_CM_REJ_PORT_CM_REDIRECT = 24, + IB_CM_REJ_PORT_REDIRECT = 25, + IB_CM_REJ_INVALID_MTU = 26, + IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES = 27, + IB_CM_REJ_CONSUMER_DEFINED = 28, + IB_CM_REJ_INVALID_RNR_RETRY = 29, + IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID = 30, + IB_CM_REJ_INVALID_CLASS_VERSION = 31, + IB_CM_REJ_INVALID_FLOW_LABEL = 32, + IB_CM_REJ_INVALID_ALT_FLOW_LABEL = 33, + IB_CM_REJ_VENDOR_OPTION_NOT_SUPPORTED = 35, +}; + +struct ib_cm_rej_event_param { + enum ib_cm_rej_reason reason; + void *ari; + u8 ari_length; +}; + +struct ib_cm_mra_event_param { + u8 service_timeout; +}; + +struct ib_cm_lap_event_param { + struct sa_path_rec *alternate_path; +}; + +enum ib_cm_apr_status { + IB_CM_APR_SUCCESS, + IB_CM_APR_INVALID_COMM_ID, + IB_CM_APR_UNSUPPORTED, + IB_CM_APR_REJECT, + IB_CM_APR_REDIRECT, + IB_CM_APR_IS_CURRENT, + IB_CM_APR_INVALID_QPN_EECN, + IB_CM_APR_INVALID_LID, + IB_CM_APR_INVALID_GID, + IB_CM_APR_INVALID_FLOW_LABEL, + IB_CM_APR_INVALID_TCLASS, + IB_CM_APR_INVALID_HOP_LIMIT, + IB_CM_APR_INVALID_PACKET_RATE, + IB_CM_APR_INVALID_SL +}; + +struct ib_cm_apr_event_param { + enum ib_cm_apr_status ap_status; + void *apr_info; + u8 info_len; +}; + +struct ib_cm_sidr_req_event_param { + struct ib_cm_id *listen_id; + __be64 service_id; + + /* + * SGID attribute of the request. Currently only + * useful for RoCE. + */ + const struct ib_gid_attr *sgid_attr; + /* P_Key that was used by the GMP's BTH header */ + u16 bth_pkey; + u8 port; + u16 pkey; +}; + +enum ib_cm_sidr_status { + IB_SIDR_SUCCESS, + IB_SIDR_UNSUPPORTED, + IB_SIDR_REJECT, + IB_SIDR_NO_QP, + IB_SIDR_REDIRECT, + IB_SIDR_UNSUPPORTED_VERSION +}; + +struct ib_cm_sidr_rep_event_param { + enum ib_cm_sidr_status status; + u32 qkey; + u32 qpn; + void *info; + const struct ib_gid_attr *sgid_attr; + u8 info_len; +}; + +struct ib_cm_event { + enum ib_cm_event_type event; + union { + struct ib_cm_req_event_param req_rcvd; + struct ib_cm_rep_event_param rep_rcvd; + /* No data for RTU received events. */ + struct ib_cm_rej_event_param rej_rcvd; + struct ib_cm_mra_event_param mra_rcvd; + struct ib_cm_lap_event_param lap_rcvd; + struct ib_cm_apr_event_param apr_rcvd; + /* No data for DREQ/DREP received events. */ + struct ib_cm_sidr_req_event_param sidr_req_rcvd; + struct ib_cm_sidr_rep_event_param sidr_rep_rcvd; + enum ib_wc_status send_status; + } param; + + void *private_data; +}; + +#define CM_REQ_ATTR_ID cpu_to_be16(0x0010) +#define CM_MRA_ATTR_ID cpu_to_be16(0x0011) +#define CM_REJ_ATTR_ID cpu_to_be16(0x0012) +#define CM_REP_ATTR_ID cpu_to_be16(0x0013) +#define CM_RTU_ATTR_ID cpu_to_be16(0x0014) +#define CM_DREQ_ATTR_ID cpu_to_be16(0x0015) +#define CM_DREP_ATTR_ID cpu_to_be16(0x0016) +#define CM_SIDR_REQ_ATTR_ID cpu_to_be16(0x0017) +#define CM_SIDR_REP_ATTR_ID cpu_to_be16(0x0018) +#define CM_LAP_ATTR_ID cpu_to_be16(0x0019) +#define CM_APR_ATTR_ID cpu_to_be16(0x001A) + +/** + * ib_cm_handler - User-defined callback to process communication events. + * @cm_id: Communication identifier associated with the reported event. + * @event: Information about the communication event. + * + * IB_CM_REQ_RECEIVED and IB_CM_SIDR_REQ_RECEIVED communication events + * generated as a result of listen requests result in the allocation of a + * new @cm_id. The new @cm_id is returned to the user through this callback. + * Clients are responsible for destroying the new @cm_id. For peer-to-peer + * IB_CM_REQ_RECEIVED and all other events, the returned @cm_id corresponds + * to a user's existing communication identifier. + * + * Users may not call ib_destroy_cm_id while in the context of this callback; + * however, returning a non-zero value instructs the communication manager to + * destroy the @cm_id after the callback completes. + */ +typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id, + const struct ib_cm_event *event); + +struct ib_cm_id { + ib_cm_handler cm_handler; + void *context; + struct ib_device *device; + __be64 service_id; + enum ib_cm_state state; /* internal CM/debug use */ + enum ib_cm_lap_state lap_state; /* internal CM/debug use */ + __be32 local_id; + __be32 remote_id; + u32 remote_cm_qpn; /* 1 unless redirected */ +}; + +/** + * ib_create_cm_id - Allocate a communication identifier. + * @device: Device associated with the cm_id. All related communication will + * be associated with the specified device. + * @cm_handler: Callback invoked to notify the user of CM events. + * @context: User specified context associated with the communication + * identifier. + * + * Communication identifiers are used to track connection states, service + * ID resolution requests, and listen requests. + */ +struct ib_cm_id *ib_create_cm_id(struct ib_device *device, + ib_cm_handler cm_handler, + void *context); + +/** + * ib_destroy_cm_id - Destroy a connection identifier. + * @cm_id: Connection identifier to destroy. + * + * This call blocks until the connection identifier is destroyed. + */ +void ib_destroy_cm_id(struct ib_cm_id *cm_id); + +#define IB_SERVICE_ID_AGN_MASK cpu_to_be64(0xFF00000000000000ULL) +#define IB_CM_ASSIGN_SERVICE_ID cpu_to_be64(0x0200000000000000ULL) +#define IB_CMA_SERVICE_ID cpu_to_be64(0x0000000001000000ULL) +#define IB_CMA_SERVICE_ID_MASK cpu_to_be64(0xFFFFFFFFFF000000ULL) +#define IB_SDP_SERVICE_ID cpu_to_be64(0x0000000000010000ULL) +#define IB_SDP_SERVICE_ID_MASK cpu_to_be64(0xFFFFFFFFFFFF0000ULL) + +/** + * ib_cm_listen - Initiates listening on the specified service ID for + * connection and service ID resolution requests. + * @cm_id: Connection identifier associated with the listen request. + * @service_id: Service identifier matched against incoming connection + * and service ID resolution requests. The service ID should be specified + * network-byte order. If set to IB_CM_ASSIGN_SERVICE_ID, the CM will + * assign a service ID to the caller. + */ +int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id); + +struct ib_cm_id *ib_cm_insert_listen(struct ib_device *device, + ib_cm_handler cm_handler, + __be64 service_id); + +struct ib_cm_req_param { + struct sa_path_rec *primary_path; + struct sa_path_rec *primary_path_inbound; + struct sa_path_rec *primary_path_outbound; + struct sa_path_rec *alternate_path; + const struct ib_gid_attr *ppath_sgid_attr; + __be64 service_id; + u32 qp_num; + enum ib_qp_type qp_type; + u32 starting_psn; + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 remote_cm_response_timeout; + u8 flow_control; + u8 local_cm_response_timeout; + u8 retry_count; + u8 rnr_retry_count; + u8 max_cm_retries; + u8 srq; + struct rdma_ucm_ece ece; +}; + +/** + * ib_send_cm_req - Sends a connection request to the remote node. + * @cm_id: Connection identifier that will be associated with the + * connection request. + * @param: Connection request information needed to establish the + * connection. + */ +int ib_send_cm_req(struct ib_cm_id *cm_id, + struct ib_cm_req_param *param); + +struct ib_cm_rep_param { + u32 qp_num; + u32 starting_psn; + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 failover_accepted; + u8 flow_control; + u8 rnr_retry_count; + u8 srq; + struct rdma_ucm_ece ece; +}; + +/** + * ib_send_cm_rep - Sends a connection reply in response to a connection + * request. + * @cm_id: Connection identifier that will be associated with the + * connection request. + * @param: Connection reply information needed to establish the + * connection. + */ +int ib_send_cm_rep(struct ib_cm_id *cm_id, + struct ib_cm_rep_param *param); + +/** + * ib_send_cm_rtu - Sends a connection ready to use message in response + * to a connection reply message. + * @cm_id: Connection identifier associated with the connection request. + * @private_data: Optional user-defined private data sent with the + * ready to use message. + * @private_data_len: Size of the private data buffer, in bytes. + */ +int ib_send_cm_rtu(struct ib_cm_id *cm_id, + const void *private_data, + u8 private_data_len); + +/** + * ib_send_cm_dreq - Sends a disconnection request for an existing + * connection. + * @cm_id: Connection identifier associated with the connection being + * released. + * @private_data: Optional user-defined private data sent with the + * disconnection request message. + * @private_data_len: Size of the private data buffer, in bytes. + */ +int ib_send_cm_dreq(struct ib_cm_id *cm_id, + const void *private_data, + u8 private_data_len); + +/** + * ib_send_cm_drep - Sends a disconnection reply to a disconnection request. + * @cm_id: Connection identifier associated with the connection being + * released. + * @private_data: Optional user-defined private data sent with the + * disconnection reply message. + * @private_data_len: Size of the private data buffer, in bytes. + * + * If the cm_id is in the correct state, the CM will transition the connection + * to the timewait state, even if an error occurs sending the DREP message. + */ +int ib_send_cm_drep(struct ib_cm_id *cm_id, + const void *private_data, + u8 private_data_len); + +/** + * ib_cm_notify - Notifies the CM of an event reported to the consumer. + * @cm_id: Connection identifier to transition to established. + * @event: Type of event. + * + * This routine should be invoked by users to notify the CM of relevant + * communication events. Events that should be reported to the CM and + * when to report them are: + * + * IB_EVENT_COMM_EST - Used when a message is received on a connected + * QP before an RTU has been received. + * IB_EVENT_PATH_MIG - Notifies the CM that the connection has failed over + * to the alternate path. + */ +int ib_cm_notify(struct ib_cm_id *cm_id, enum ib_event_type event); + +/** + * ib_send_cm_rej - Sends a connection rejection message to the + * remote node. + * @cm_id: Connection identifier associated with the connection being + * rejected. + * @reason: Reason for the connection request rejection. + * @ari: Optional additional rejection information. + * @ari_length: Size of the additional rejection information, in bytes. + * @private_data: Optional user-defined private data sent with the + * rejection message. + * @private_data_len: Size of the private data buffer, in bytes. + */ +int ib_send_cm_rej(struct ib_cm_id *cm_id, + enum ib_cm_rej_reason reason, + void *ari, + u8 ari_length, + const void *private_data, + u8 private_data_len); + +#define IB_CM_MRA_FLAG_DELAY 0x80 /* Send MRA only after a duplicate msg */ + +/** + * ib_send_cm_mra - Sends a message receipt acknowledgement to a connection + * message. + * @cm_id: Connection identifier associated with the connection message. + * @service_timeout: The lower 5-bits specify the maximum time required for + * the sender to reply to the connection message. The upper 3-bits + * specify additional control flags. + * @private_data: Optional user-defined private data sent with the + * message receipt acknowledgement. + * @private_data_len: Size of the private data buffer, in bytes. + */ +int ib_send_cm_mra(struct ib_cm_id *cm_id, + u8 service_timeout, + const void *private_data, + u8 private_data_len); + +/** + * ib_cm_init_qp_attr - Initializes the QP attributes for use in transitioning + * to a specified QP state. + * @cm_id: Communication identifier associated with the QP attributes to + * initialize. + * @qp_attr: On input, specifies the desired QP state. On output, the + * mandatory and desired optional attributes will be set in order to + * modify the QP to the specified state. + * @qp_attr_mask: The QP attribute mask that may be used to transition the + * QP to the specified state. + * + * Users must set the @qp_attr->qp_state to the desired QP state. This call + * will set all required attributes for the given transition, along with + * known optional attributes. Users may override the attributes returned from + * this call before calling ib_modify_qp. + */ +int ib_cm_init_qp_attr(struct ib_cm_id *cm_id, + struct ib_qp_attr *qp_attr, + int *qp_attr_mask); + +struct ib_cm_sidr_req_param { + struct sa_path_rec *path; + const struct ib_gid_attr *sgid_attr; + __be64 service_id; + unsigned long timeout_ms; + const void *private_data; + u8 private_data_len; + u8 max_cm_retries; +}; + +/** + * ib_send_cm_sidr_req - Sends a service ID resolution request to the + * remote node. + * @cm_id: Communication identifier that will be associated with the + * service ID resolution request. + * @param: Service ID resolution request information. + */ +int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, + struct ib_cm_sidr_req_param *param); + +struct ib_cm_sidr_rep_param { + u32 qp_num; + u32 qkey; + enum ib_cm_sidr_status status; + const void *info; + u8 info_length; + const void *private_data; + u8 private_data_len; + struct rdma_ucm_ece ece; +}; + +/** + * ib_send_cm_sidr_rep - Sends a service ID resolution reply to the + * remote node. + * @cm_id: Communication identifier associated with the received service ID + * resolution request. + * @param: Service ID resolution reply information. + */ +int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id, + struct ib_cm_sidr_rep_param *param); + +/** + * ibcm_reject_msg - return a pointer to a reject message string. + * @reason: Value returned in the REJECT event status field. + */ +const char *__attribute_const__ ibcm_reject_msg(int reason); + +#endif /* IB_CM_H */ -- cgit v1.2.3