From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/scsi/scsi.h | 220 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 include/scsi/scsi.h (limited to 'include/scsi/scsi.h') diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h new file mode 100644 index 000000000..ec093594b --- /dev/null +++ b/include/scsi/scsi.h @@ -0,0 +1,220 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header file contains public constants and structures used by + * the SCSI initiator code. + */ +#ifndef _SCSI_SCSI_H +#define _SCSI_SCSI_H + +#include +#include +#include +#include +#include +#include + +struct scsi_cmnd; + +enum scsi_timeouts { + SCSI_DEFAULT_EH_TIMEOUT = 10 * HZ, +}; + +/* + * DIX-capable adapters effectively support infinite chaining for the + * protection information scatterlist + */ +#define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF + +/* + * Special value for scanning to specify scanning or rescanning of all + * possible channels, (target) ids, or luns on a given shost. + */ +#define SCAN_WILD_CARD ~0 + +/* + * standard mode-select header prepended to all mode-select commands + */ + +struct ccs_modesel_head { + __u8 _r1; /* reserved */ + __u8 medium; /* device-specific medium type */ + __u8 _r2; /* reserved */ + __u8 block_desc_length; /* block descriptor length */ + __u8 density; /* device-specific density code */ + __u8 number_blocks_hi; /* number of blocks in this block desc */ + __u8 number_blocks_med; + __u8 number_blocks_lo; + __u8 _r3; + __u8 block_length_hi; /* block length for blocks in this desc */ + __u8 block_length_med; + __u8 block_length_lo; +}; + +/* + * The Well Known LUNS (SAM-3) in our int representation of a LUN + */ +#define SCSI_W_LUN_BASE 0xc100 +#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1) +#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2) +#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3) + +static inline int scsi_is_wlun(u64 lun) +{ + return (lun & 0xff00) == SCSI_W_LUN_BASE; +} + +/** + * scsi_status_is_check_condition - check the status return. + * + * @status: the status passed up from the driver (including host and + * driver components) + * + * This returns true if the status code is SAM_STAT_CHECK_CONDITION. + */ +static inline int scsi_status_is_check_condition(int status) +{ + if (status < 0) + return false; + status &= 0xfe; + return status == SAM_STAT_CHECK_CONDITION; +} + +/* + * Extended message codes. + */ +#define EXTENDED_MODIFY_DATA_POINTER 0x00 +#define EXTENDED_SDTR 0x01 +#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ +#define EXTENDED_WDTR 0x03 +#define EXTENDED_PPR 0x04 +#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05 + +/* + * Internal return values. + */ +enum scsi_disposition { + NEEDS_RETRY = 0x2001, + SUCCESS = 0x2002, + FAILED = 0x2003, + QUEUED = 0x2004, + SOFT_ERROR = 0x2005, + ADD_TO_MLQUEUE = 0x2006, + TIMEOUT_ERROR = 0x2007, + SCSI_RETURN_NOT_HANDLED = 0x2008, + FAST_IO_FAIL = 0x2009, +}; + +/* + * Midlevel queue return values. + */ +#define SCSI_MLQUEUE_HOST_BUSY 0x1055 +#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056 +#define SCSI_MLQUEUE_EH_RETRY 0x1057 +#define SCSI_MLQUEUE_TARGET_BUSY 0x1058 + +/* + * Use these to separate status msg and our bytes + * + * These are set by: + * + * status byte = set from target device + * msg_byte (unused) + * host_byte = set by low-level driver to indicate status. + */ +#define status_byte(result) (result & 0xff) +#define host_byte(result) (((result) >> 16) & 0xff) + +#define sense_class(sense) (((sense) >> 4) & 0x7) +#define sense_error(sense) ((sense) & 0xf) +#define sense_valid(sense) ((sense) & 0x80) + +/* + * default timeouts +*/ +#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) +#define START_STOP_TIMEOUT (60 * HZ) +#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) +#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) +#define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) + + +#define IDENTIFY_BASE 0x80 +#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\ + ((can_disconnect) ? 0x40 : 0) |\ + ((lun) & 0x07)) + +/* + * struct scsi_device::scsi_level values. For SCSI devices other than those + * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1) + * where "resp" is a byte array of the response to an INQUIRY. The scsi_level + * variable is visible to the user via sysfs. + */ + +#define SCSI_UNKNOWN 0 +#define SCSI_1 1 +#define SCSI_1_CCS 2 +#define SCSI_2 3 +#define SCSI_3 4 /* SPC */ +#define SCSI_SPC_2 5 +#define SCSI_SPC_3 6 + +/* + * INQ PERIPHERAL QUALIFIERS + */ +#define SCSI_INQ_PQ_CON 0x00 +#define SCSI_INQ_PQ_NOT_CON 0x01 +#define SCSI_INQ_PQ_NOT_CAP 0x03 + + +/* + * Here are some scsi specific ioctl commands which are sometimes useful. + * + * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395 + */ + +/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */ +#define SCSI_IOCTL_GET_IDLUN 0x5382 + +/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */ + +/* Used to obtain the host number of a device. */ +#define SCSI_IOCTL_PROBE_HOST 0x5385 + +/* Used to obtain the bus number for a device */ +#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 + +/* Used to obtain the PCI location of a device */ +#define SCSI_IOCTL_GET_PCI 0x5387 + +/** scsi_status_is_good - check the status return. + * + * @status: the status passed up from the driver (including host and + * driver components) + * + * This returns true for known good conditions that may be treated as + * command completed normally + */ +static inline bool scsi_status_is_good(int status) +{ + if (status < 0) + return false; + + if (host_byte(status) == DID_NO_CONNECT) + return false; + + /* + * FIXME: bit0 is listed as reserved in SCSI-2, but is + * significant in SCSI-3. For now, we follow the SCSI-2 + * behaviour and ignore reserved bits. + */ + status &= 0xfe; + return ((status == SAM_STAT_GOOD) || + (status == SAM_STAT_CONDITION_MET) || + /* Next two "intermediate" statuses are obsolete in SAM-4 */ + (status == SAM_STAT_INTERMEDIATE) || + (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) || + /* FIXME: this is obsolete in SAM-3 */ + (status == SAM_STAT_COMMAND_TERMINATED)); +} + +#endif /* _SCSI_SCSI_H */ -- cgit v1.2.3