From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/scsi/scsi_transport_srp.h | 145 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) create mode 100644 include/scsi/scsi_transport_srp.h (limited to 'include/scsi/scsi_transport_srp.h') diff --git a/include/scsi/scsi_transport_srp.h b/include/scsi/scsi_transport_srp.h new file mode 100644 index 000000000..dfc78aa11 --- /dev/null +++ b/include/scsi/scsi_transport_srp.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef SCSI_TRANSPORT_SRP_H +#define SCSI_TRANSPORT_SRP_H + +#include +#include +#include + +#define SRP_RPORT_ROLE_INITIATOR 0 +#define SRP_RPORT_ROLE_TARGET 1 + +struct srp_rport_identifiers { + u8 port_id[16]; + u8 roles; +}; + +/** + * enum srp_rport_state - SRP transport layer state + * @SRP_RPORT_RUNNING: Transport layer operational. + * @SRP_RPORT_BLOCKED: Transport layer not operational; fast I/O fail timer + * is running and I/O has been blocked. + * @SRP_RPORT_FAIL_FAST: Fast I/O fail timer has expired; fail I/O fast. + * @SRP_RPORT_LOST: Port is being removed. + */ +enum srp_rport_state { + SRP_RPORT_RUNNING, + SRP_RPORT_BLOCKED, + SRP_RPORT_FAIL_FAST, + SRP_RPORT_LOST, +}; + +/** + * struct srp_rport - SRP initiator or target port + * + * Fields that are relevant for SRP initiator and SRP target drivers: + * @dev: Device associated with this rport. + * @port_id: 16-byte port identifier. + * @roles: Role of this port - initiator or target. + * + * Fields that are only relevant for SRP initiator drivers: + * @lld_data: LLD private data. + * @mutex: Protects against concurrent rport reconnect / + * fast_io_fail / dev_loss_tmo activity. + * @state: rport state. + * @reconnect_delay: Reconnect delay in seconds. + * @failed_reconnects: Number of failed reconnect attempts. + * @reconnect_work: Work structure used for scheduling reconnect attempts. + * @fast_io_fail_tmo: Fast I/O fail timeout in seconds. + * @dev_loss_tmo: Device loss timeout in seconds. + * @fast_io_fail_work: Work structure used for scheduling fast I/O fail work. + * @dev_loss_work: Work structure used for scheduling device loss work. + */ +struct srp_rport { + /* for initiator and target drivers */ + + struct device dev; + + u8 port_id[16]; + u8 roles; + + /* for initiator drivers */ + + void *lld_data; + + struct mutex mutex; + enum srp_rport_state state; + int reconnect_delay; + int failed_reconnects; + struct delayed_work reconnect_work; + int fast_io_fail_tmo; + int dev_loss_tmo; + struct delayed_work fast_io_fail_work; + struct delayed_work dev_loss_work; +}; + +/** + * struct srp_function_template + * + * Fields that are only relevant for SRP initiator drivers: + * @has_rport_state: Whether or not to create the state, fast_io_fail_tmo and + * dev_loss_tmo sysfs attribute for an rport. + * @reset_timer_if_blocked: Whether or srp_timed_out() should reset the command + * timer if the device on which it has been queued is blocked. + * @reconnect_delay: If not NULL, points to the default reconnect_delay value. + * @fast_io_fail_tmo: If not NULL, points to the default fast_io_fail_tmo value. + * @dev_loss_tmo: If not NULL, points to the default dev_loss_tmo value. + * @reconnect: Callback function for reconnecting to the target. See also + * srp_reconnect_rport(). + * @terminate_rport_io: Callback function for terminating all outstanding I/O + * requests for an rport. + * @rport_delete: Callback function that deletes an rport. + */ +struct srp_function_template { + /* for initiator drivers */ + bool has_rport_state; + bool reset_timer_if_blocked; + int *reconnect_delay; + int *fast_io_fail_tmo; + int *dev_loss_tmo; + int (*reconnect)(struct srp_rport *rport); + void (*terminate_rport_io)(struct srp_rport *rport); + void (*rport_delete)(struct srp_rport *rport); +}; + +extern struct scsi_transport_template * +srp_attach_transport(struct srp_function_template *); +extern void srp_release_transport(struct scsi_transport_template *); + +extern void srp_rport_get(struct srp_rport *rport); +extern void srp_rport_put(struct srp_rport *rport); +extern struct srp_rport *srp_rport_add(struct Scsi_Host *, + struct srp_rport_identifiers *); +extern void srp_rport_del(struct srp_rport *); +extern int srp_tmo_valid(int reconnect_delay, int fast_io_fail_tmo, + long dev_loss_tmo); +int srp_parse_tmo(int *tmo, const char *buf); +extern int srp_reconnect_rport(struct srp_rport *rport); +extern void srp_start_tl_fail_timers(struct srp_rport *rport); +extern void srp_remove_host(struct Scsi_Host *); +extern void srp_stop_rport_timers(struct srp_rport *rport); +enum scsi_timeout_action srp_timed_out(struct scsi_cmnd *scmd); + +/** + * srp_chkready() - evaluate the transport layer state before I/O + * @rport: SRP target port pointer. + * + * Returns a SCSI result code that can be returned by the LLD queuecommand() + * implementation. The role of this function is similar to that of + * fc_remote_port_chkready(). + */ +static inline int srp_chkready(struct srp_rport *rport) +{ + switch (rport->state) { + case SRP_RPORT_RUNNING: + case SRP_RPORT_BLOCKED: + default: + return 0; + case SRP_RPORT_FAIL_FAST: + return DID_TRANSPORT_FAILFAST << 16; + case SRP_RPORT_LOST: + return DID_NO_CONNECT << 16; + } +} + +#endif -- cgit v1.2.3