From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/uapi/sound/snd_sst_tokens.h | 324 ++++++++++++++++++++++++++++++++++++ 1 file changed, 324 insertions(+) create mode 100644 include/uapi/sound/snd_sst_tokens.h (limited to 'include/uapi/sound/snd_sst_tokens.h') diff --git a/include/uapi/sound/snd_sst_tokens.h b/include/uapi/sound/snd_sst_tokens.h new file mode 100644 index 000000000..defeb0c6e --- /dev/null +++ b/include/uapi/sound/snd_sst_tokens.h @@ -0,0 +1,324 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * snd_sst_tokens.h - Intel SST tokens definition + * + * Copyright (C) 2016 Intel Corp + * Author: Shreyas NC + */ +#ifndef __SND_SST_TOKENS_H__ +#define __SND_SST_TOKENS_H__ + +/** + * %SKL_TKN_UUID: Module UUID + * + * %SKL_TKN_U8_BLOCK_TYPE: Type of the private data block.Can be: + * tuples, bytes, short and words + * + * %SKL_TKN_U8_IN_PIN_TYPE: Input pin type, + * homogenous=0, heterogenous=1 + * + * %SKL_TKN_U8_OUT_PIN_TYPE: Output pin type, + * homogenous=0, heterogenous=1 + * %SKL_TKN_U8_DYN_IN_PIN: Configure Input pin dynamically + * if true + * + * %SKL_TKN_U8_DYN_OUT_PIN: Configure Output pin dynamically + * if true + * + * %SKL_TKN_U8_IN_QUEUE_COUNT: Store the number of Input pins + * + * %SKL_TKN_U8_OUT_QUEUE_COUNT: Store the number of Output pins + * + * %SKL_TKN_U8_TIME_SLOT: TDM slot number + * + * %SKL_TKN_U8_CORE_ID: Stores module affinity value.Can take + * the values: + * SKL_AFFINITY_CORE_0 = 0, + * SKL_AFFINITY_CORE_1, + * SKL_AFFINITY_CORE_MAX + * + * %SKL_TKN_U8_MOD_TYPE: Module type value. + * + * %SKL_TKN_U8_CONN_TYPE: Module connection type can be a FE, + * BE or NONE as defined : + * SKL_PIPE_CONN_TYPE_NONE = 0, + * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA) + * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA) + * + * %SKL_TKN_U8_DEV_TYPE: Type of device to which the module is + * connected + * Can take the values: + * SKL_DEVICE_BT = 0x0, + * SKL_DEVICE_DMIC = 0x1, + * SKL_DEVICE_I2S = 0x2, + * SKL_DEVICE_SLIMBUS = 0x3, + * SKL_DEVICE_HDALINK = 0x4, + * SKL_DEVICE_HDAHOST = 0x5, + * SKL_DEVICE_NONE + * + * %SKL_TKN_U8_HW_CONN_TYPE: Connection type of the HW to which the + * module is connected + * SKL_CONN_NONE = 0, + * SKL_CONN_SOURCE = 1, + * SKL_CONN_SINK = 2 + * + * %SKL_TKN_U16_PIN_INST_ID: Stores the pin instance id + * + * %SKL_TKN_U16_MOD_INST_ID: Stores the mdule instance id + * + * %SKL_TKN_U32_MAX_MCPS: Module max mcps value + * + * %SKL_TKN_U32_MEM_PAGES: Module resource pages + * + * %SKL_TKN_U32_OBS: Stores Output Buffer size + * + * %SKL_TKN_U32_IBS: Stores input buffer size + * + * %SKL_TKN_U32_VBUS_ID: Module VBUS_ID. PDM=0, SSP0=0, + * SSP1=1,SSP2=2, + * SSP3=3, SSP4=4, + * SSP5=5, SSP6=6,INVALID + * + * %SKL_TKN_U32_PARAMS_FIXUP: Module Params fixup mask + * %SKL_TKN_U32_CONVERTER: Module params converter mask + * %SKL_TKN_U32_PIPE_ID: Stores the pipe id + * + * %SKL_TKN_U32_PIPE_CONN_TYPE: Type of the token to which the pipe is + * connected to. It can be + * SKL_PIPE_CONN_TYPE_NONE = 0, + * SKL_PIPE_CONN_TYPE_FE = 1 (HOST_DMA), + * SKL_PIPE_CONN_TYPE_BE = 2 (LINK_DMA), + * + * %SKL_TKN_U32_PIPE_PRIORITY: Pipe priority value + * %SKL_TKN_U32_PIPE_MEM_PGS: Pipe resource pages + * + * %SKL_TKN_U32_DIR_PIN_COUNT: Value for the direction to set input/output + * formats and the pin count. + * The first 4 bits have the direction + * value and the next 4 have + * the pin count value. + * SKL_DIR_IN = 0, SKL_DIR_OUT = 1. + * The input and output formats + * share the same set of tokens + * with the distinction between input + * and output made by reading direction + * token. + * + * %SKL_TKN_U32_FMT_CH: Supported channel count + * + * %SKL_TKN_U32_FMT_FREQ: Supported frequency/sample rate + * + * %SKL_TKN_U32_FMT_BIT_DEPTH: Supported container size + * + * %SKL_TKN_U32_FMT_SAMPLE_SIZE:Number of samples in the container + * + * %SKL_TKN_U32_FMT_CH_CONFIG: Supported channel configurations for the + * input/output. + * + * %SKL_TKN_U32_FMT_INTERLEAVE: Interleaving style which can be per + * channel or per sample. The values can be : + * SKL_INTERLEAVING_PER_CHANNEL = 0, + * SKL_INTERLEAVING_PER_SAMPLE = 1, + * + * %SKL_TKN_U32_FMT_SAMPLE_TYPE: + * Specifies the sample type. Can take the + * values: SKL_SAMPLE_TYPE_INT_MSB = 0, + * SKL_SAMPLE_TYPE_INT_LSB = 1, + * SKL_SAMPLE_TYPE_INT_SIGNED = 2, + * SKL_SAMPLE_TYPE_INT_UNSIGNED = 3, + * SKL_SAMPLE_TYPE_FLOAT = 4 + * + * %SKL_TKN_U32_CH_MAP: Channel map values + * %SKL_TKN_U32_MOD_SET_PARAMS: It can take these values: + * SKL_PARAM_DEFAULT, SKL_PARAM_INIT, + * SKL_PARAM_SET, SKL_PARAM_BIND + * + * %SKL_TKN_U32_MOD_PARAM_ID: ID of the module params + * + * %SKL_TKN_U32_CAPS_SET_PARAMS: + * Set params value + * + * %SKL_TKN_U32_CAPS_PARAMS_ID: Params ID + * + * %SKL_TKN_U32_CAPS_SIZE: Caps size + * + * %SKL_TKN_U32_PROC_DOMAIN: Specify processing domain + * + * %SKL_TKN_U32_LIB_COUNT: Specifies the number of libraries + * + * %SKL_TKN_STR_LIB_NAME: Specifies the library name + * + * %SKL_TKN_U32_PMODE: Specifies the power mode for pipe + * + * %SKL_TKL_U32_D0I3_CAPS: Specifies the D0i3 capability for module + * + * %SKL_TKN_U32_DMA_BUF_SIZE: DMA buffer size in millisec + * + * %SKL_TKN_U32_PIPE_DIR: Specifies pipe direction. Can be + * playback/capture. + * + * %SKL_TKN_U32_NUM_CONFIGS: Number of pipe configs + * + * %SKL_TKN_U32_PATH_MEM_PGS: Size of memory (in pages) required for pipeline + * and its data + * + * %SKL_TKN_U32_PIPE_CONFIG_ID: Config id for the modules in the pipe + * and PCM params supported by that pipe + * config. This is used as index to fill + * up the pipe config and module config + * structure. + * + * %SKL_TKN_U32_CFG_FREQ: + * %SKL_TKN_U8_CFG_CHAN: + * %SKL_TKN_U8_CFG_BPS: PCM params (freq, channels, bits per sample) + * supported for each of the pipe configs. + * + * %SKL_TKN_CFG_MOD_RES_ID: Module's resource index for each of the + * pipe config + * + * %SKL_TKN_CFG_MOD_FMT_ID: Module's interface index for each of the + * pipe config + * + * %SKL_TKN_U8_NUM_MOD: Number of modules in the manifest + * + * %SKL_TKN_MM_U8_MOD_IDX: Current index of the module in the manifest + * + * %SKL_TKN_MM_U8_NUM_RES: Number of resources for the module + * + * %SKL_TKN_MM_U8_NUM_INTF: Number of interfaces for the module + * + * %SKL_TKN_MM_U32_RES_ID: Resource index for the resource info to + * be filled into. + * A module can support multiple resource + * configuration and is represnted as a + * resource table. This index is used to + * fill information into appropriate index. + * + * %SKL_TKN_MM_U32_CPS: DSP cycles per second + * + * %SKL_TKN_MM_U32_DMA_SIZE: Allocated buffer size for gateway DMA + * + * %SKL_TKN_MM_U32_CPC: DSP cycles allocated per frame + * + * %SKL_TKN_MM_U32_RES_PIN_ID: Resource pin index in the module + * + * %SKL_TKN_MM_U32_INTF_PIN_ID: Interface index in the module + * + * %SKL_TKN_MM_U32_PIN_BUF: Buffer size of the module pin + * + * %SKL_TKN_MM_U32_FMT_ID: Format index for each of the interface/ + * format information to be filled into. + * + * %SKL_TKN_MM_U32_NUM_IN_FMT: Number of input formats + * %SKL_TKN_MM_U32_NUM_OUT_FMT: Number of output formats + * + * %SKL_TKN_U32_ASTATE_IDX: Table Index for the A-State entry to be filled + * with kcps and clock source + * + * %SKL_TKN_U32_ASTATE_COUNT: Number of valid entries in A-State table + * + * %SKL_TKN_U32_ASTATE_KCPS: Specifies the core load threshold (in kilo + * cycles per second) below which DSP is clocked + * from source specified by clock source. + * + * %SKL_TKN_U32_ASTATE_CLK_SRC: Clock source for A-State entry + * + * %SKL_TKN_U32_FMT_CFG_IDX: Format config index + * + * module_id and loadable flags dont have tokens as these values will be + * read from the DSP FW manifest + * + * Tokens defined can be used either in the manifest or widget private data. + * + * SKL_TKN_MM is used as a suffix for all tokens that represent + * module data in the manifest. + */ +enum SKL_TKNS { + SKL_TKN_UUID = 1, + SKL_TKN_U8_NUM_BLOCKS, + SKL_TKN_U8_BLOCK_TYPE, + SKL_TKN_U8_IN_PIN_TYPE, + SKL_TKN_U8_OUT_PIN_TYPE, + SKL_TKN_U8_DYN_IN_PIN, + SKL_TKN_U8_DYN_OUT_PIN, + SKL_TKN_U8_IN_QUEUE_COUNT, + SKL_TKN_U8_OUT_QUEUE_COUNT, + SKL_TKN_U8_TIME_SLOT, + SKL_TKN_U8_CORE_ID, + SKL_TKN_U8_MOD_TYPE, + SKL_TKN_U8_CONN_TYPE, + SKL_TKN_U8_DEV_TYPE, + SKL_TKN_U8_HW_CONN_TYPE, + SKL_TKN_U16_MOD_INST_ID, + SKL_TKN_U16_BLOCK_SIZE, + SKL_TKN_U32_MAX_MCPS, + SKL_TKN_U32_MEM_PAGES, + SKL_TKN_U32_OBS, + SKL_TKN_U32_IBS, + SKL_TKN_U32_VBUS_ID, + SKL_TKN_U32_PARAMS_FIXUP, + SKL_TKN_U32_CONVERTER, + SKL_TKN_U32_PIPE_ID, + SKL_TKN_U32_PIPE_CONN_TYPE, + SKL_TKN_U32_PIPE_PRIORITY, + SKL_TKN_U32_PIPE_MEM_PGS, + SKL_TKN_U32_DIR_PIN_COUNT, + SKL_TKN_U32_FMT_CH, + SKL_TKN_U32_FMT_FREQ, + SKL_TKN_U32_FMT_BIT_DEPTH, + SKL_TKN_U32_FMT_SAMPLE_SIZE, + SKL_TKN_U32_FMT_CH_CONFIG, + SKL_TKN_U32_FMT_INTERLEAVE, + SKL_TKN_U32_FMT_SAMPLE_TYPE, + SKL_TKN_U32_FMT_CH_MAP, + SKL_TKN_U32_PIN_MOD_ID, + SKL_TKN_U32_PIN_INST_ID, + SKL_TKN_U32_MOD_SET_PARAMS, + SKL_TKN_U32_MOD_PARAM_ID, + SKL_TKN_U32_CAPS_SET_PARAMS, + SKL_TKN_U32_CAPS_PARAMS_ID, + SKL_TKN_U32_CAPS_SIZE, + SKL_TKN_U32_PROC_DOMAIN, + SKL_TKN_U32_LIB_COUNT, + SKL_TKN_STR_LIB_NAME, + SKL_TKN_U32_PMODE, + SKL_TKL_U32_D0I3_CAPS, /* Typo added at v4.10 */ + SKL_TKN_U32_D0I3_CAPS = SKL_TKL_U32_D0I3_CAPS, + SKL_TKN_U32_DMA_BUF_SIZE, + + SKL_TKN_U32_PIPE_DIRECTION, + SKL_TKN_U32_PIPE_CONFIG_ID, + SKL_TKN_U32_NUM_CONFIGS, + SKL_TKN_U32_PATH_MEM_PGS, + + SKL_TKN_U32_CFG_FREQ, + SKL_TKN_U8_CFG_CHAN, + SKL_TKN_U8_CFG_BPS, + SKL_TKN_CFG_MOD_RES_ID, + SKL_TKN_CFG_MOD_FMT_ID, + SKL_TKN_U8_NUM_MOD, + + SKL_TKN_MM_U8_MOD_IDX, + SKL_TKN_MM_U8_NUM_RES, + SKL_TKN_MM_U8_NUM_INTF, + SKL_TKN_MM_U32_RES_ID, + SKL_TKN_MM_U32_CPS, + SKL_TKN_MM_U32_DMA_SIZE, + SKL_TKN_MM_U32_CPC, + SKL_TKN_MM_U32_RES_PIN_ID, + SKL_TKN_MM_U32_INTF_PIN_ID, + SKL_TKN_MM_U32_PIN_BUF, + SKL_TKN_MM_U32_FMT_ID, + SKL_TKN_MM_U32_NUM_IN_FMT, + SKL_TKN_MM_U32_NUM_OUT_FMT, + + SKL_TKN_U32_ASTATE_IDX, + SKL_TKN_U32_ASTATE_COUNT, + SKL_TKN_U32_ASTATE_KCPS, + SKL_TKN_U32_ASTATE_CLK_SRC, + + SKL_TKN_U32_FMT_CFG_IDX = 96, + SKL_TKN_MAX = SKL_TKN_U32_FMT_CFG_IDX, +}; + +#endif -- cgit v1.2.3