From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/video/trident.h | 147 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 include/video/trident.h (limited to 'include/video/trident.h') diff --git a/include/video/trident.h b/include/video/trident.h new file mode 100644 index 000000000..5ccc0d6a0 --- /dev/null +++ b/include/video/trident.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef TRIDENTFB_DEBUG +#define TRIDENTFB_DEBUG 0 +#endif + +#if TRIDENTFB_DEBUG +#define debug(f, a...) printk("%s:" f, __func__ , ## a); +#else +#define debug(f, a...) +#endif + +#define output(f, a...) pr_info("tridentfb: " f, ## a) + +#define Kb (1024) +#define Mb (Kb*Kb) + +/* PCI IDS of supported cards temporarily here */ + +#define CYBER9320 0x9320 +#define CYBER9388 0x9388 +#define CYBER9382 0x9382 /* the real PCI id for this is 9660 */ +#define CYBER9385 0x9385 /* ditto */ +#define CYBER9397 0x9397 +#define CYBER9397DVD 0x939A +#define CYBER9520 0x9520 +#define CYBER9525DVD 0x9525 +#define TGUI9440 0x9440 +#define TGUI9660 0x9660 +#define PROVIDIA9685 0x9685 +#define IMAGE975 0x9750 +#define IMAGE985 0x9850 +#define BLADE3D 0x9880 +#define CYBERBLADEE4 0x9540 +#define CYBERBLADEi7 0x8400 +#define CYBERBLADEi7D 0x8420 +#define CYBERBLADEi1 0x8500 +#define CYBERBLADEi1D 0x8520 +#define CYBERBLADEAi1 0x8600 +#define CYBERBLADEAi1D 0x8620 +#define CYBERBLADEXPAi1 0x8820 +#define CYBERBLADEXPm8 0x9910 +#define CYBERBLADEXPm16 0x9930 + +/* these defines are for 'lcd' variable */ +#define LCD_STRETCH 0 +#define LCD_CENTER 1 +#define LCD_BIOS 2 + +/* General Registers */ +#define SPR 0x1F /* Software Programming Register (videoram) */ + +/* 3C4 */ +#define RevisionID 0x09 +#define OldOrNew 0x0B +#define ConfPort1 0x0C +#define ConfPort2 0x0C +#define NewMode2 0x0D +#define NewMode1 0x0E +#define Protection 0x11 +#define MCLKLow 0x16 +#define MCLKHigh 0x17 +#define ClockLow 0x18 +#define ClockHigh 0x19 +#define SSetup 0x20 +#define SKey 0x37 +#define SPKey 0x57 + +/* 3x4 */ +#define CRTCModuleTest 0x1E +#define FIFOControl 0x20 +#define LinearAddReg 0x21 +#define DRAMTiming 0x23 +#define New32 0x23 +#define RAMDACTiming 0x25 +#define CRTHiOrd 0x27 +#define AddColReg 0x29 +#define InterfaceSel 0x2A +#define HorizOverflow 0x2B +#define GETest 0x2D +#define Performance 0x2F +#define GraphEngReg 0x36 +#define I2C 0x37 +#define PixelBusReg 0x38 +#define PCIReg 0x39 +#define DRAMControl 0x3A +#define MiscContReg 0x3C +#define CursorXLow 0x40 +#define CursorXHigh 0x41 +#define CursorYLow 0x42 +#define CursorYHigh 0x43 +#define CursorLocLow 0x44 +#define CursorLocHigh 0x45 +#define CursorXOffset 0x46 +#define CursorYOffset 0x47 +#define CursorFG1 0x48 +#define CursorFG2 0x49 +#define CursorFG3 0x4A +#define CursorFG4 0x4B +#define CursorBG1 0x4C +#define CursorBG2 0x4D +#define CursorBG3 0x4E +#define CursorBG4 0x4F +#define CursorControl 0x50 +#define PCIRetry 0x55 +#define PreEndControl 0x56 +#define PreEndFetch 0x57 +#define PCIMaster 0x60 +#define Enhancement0 0x62 +#define NewEDO 0x64 +#define TVinterface 0xC0 +#define TVMode 0xC1 +#define ClockControl 0xCF + + +/* 3CE */ +#define MiscExtFunc 0x0F +#define PowerStatus 0x23 +#define MiscIntContReg 0x2F +#define CyberControl 0x30 +#define CyberEnhance 0x31 +#define FPConfig 0x33 +#define VertStretch 0x52 +#define HorStretch 0x53 +#define BiosMode 0x5c +#define BiosReg 0x5d + +/* Graphics Engine */ +#define STATUS 0x2120 +#define OLDCMD 0x2124 +#define DRAWFL 0x2128 +#define OLDCLR 0x212C +#define OLDDST 0x2138 +#define OLDSRC 0x213C +#define OLDDIM 0x2140 +#define CMD 0x2144 +#define ROP 0x2148 +#define COLOR 0x2160 +#define BGCOLOR 0x2164 +#define SRC1 0x2100 +#define SRC2 0x2104 +#define DST1 0x2108 +#define DST2 0x210C + +#define ROP_S 0xCC +#define ROP_P 0xF0 +#define ROP_X 0x66 -- cgit v1.2.3