From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/xen/interface/sched.h | 166 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 include/xen/interface/sched.h (limited to 'include/xen/interface/sched.h') diff --git a/include/xen/interface/sched.h b/include/xen/interface/sched.h new file mode 100644 index 000000000..4dac0634f --- /dev/null +++ b/include/xen/interface/sched.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: MIT */ +/****************************************************************************** + * sched.h + * + * Scheduler state interactions + * + * Copyright (c) 2005, Keir Fraser + */ + +#ifndef __XEN_PUBLIC_SCHED_H__ +#define __XEN_PUBLIC_SCHED_H__ + +#include + +/* + * Guest Scheduler Operations + * + * The SCHEDOP interface provides mechanisms for a guest to interact + * with the scheduler, including yield, blocking and shutting itself + * down. + */ + +/* + * The prototype for this hypercall is: + * long HYPERVISOR_sched_op(enum sched_op cmd, void *arg, ...) + * + * @cmd == SCHEDOP_??? (scheduler operation). + * @arg == Operation-specific extra argument(s), as described below. + * ... == Additional Operation-specific extra arguments, described below. + * + * Versions of Xen prior to 3.0.2 provided only the following legacy version + * of this hypercall, supporting only the commands yield, block and shutdown: + * long sched_op(int cmd, unsigned long arg) + * @cmd == SCHEDOP_??? (scheduler operation). + * @arg == 0 (SCHEDOP_yield and SCHEDOP_block) + * == SHUTDOWN_* code (SCHEDOP_shutdown) + * + * This legacy version is available to new guests as: + * long HYPERVISOR_sched_op_compat(enum sched_op cmd, unsigned long arg) + */ + +/* + * Voluntarily yield the CPU. + * @arg == NULL. + */ +#define SCHEDOP_yield 0 + +/* + * Block execution of this VCPU until an event is received for processing. + * If called with event upcalls masked, this operation will atomically + * reenable event delivery and check for pending events before blocking the + * VCPU. This avoids a "wakeup waiting" race. + * @arg == NULL. + */ +#define SCHEDOP_block 1 + +/* + * Halt execution of this domain (all VCPUs) and notify the system controller. + * @arg == pointer to sched_shutdown structure. + * + * If the sched_shutdown_t reason is SHUTDOWN_suspend then + * x86 PV guests must also set RDX (EDX for 32-bit guests) to the MFN + * of the guest's start info page. RDX/EDX is the third hypercall + * argument. + * + * In addition, which reason is SHUTDOWN_suspend this hypercall + * returns 1 if suspend was cancelled or the domain was merely + * checkpointed, and 0 if it is resuming in a new domain. + */ +#define SCHEDOP_shutdown 2 + +/* + * Poll a set of event-channel ports. Return when one or more are pending. An + * optional timeout may be specified. + * @arg == pointer to sched_poll structure. + */ +#define SCHEDOP_poll 3 + +/* + * Declare a shutdown for another domain. The main use of this function is + * in interpreting shutdown requests and reasons for fully-virtualized + * domains. A para-virtualized domain may use SCHEDOP_shutdown directly. + * @arg == pointer to sched_remote_shutdown structure. + */ +#define SCHEDOP_remote_shutdown 4 + +/* + * Latch a shutdown code, so that when the domain later shuts down it + * reports this code to the control tools. + * @arg == sched_shutdown, as for SCHEDOP_shutdown. + */ +#define SCHEDOP_shutdown_code 5 + +/* + * Setup, poke and destroy a domain watchdog timer. + * @arg == pointer to sched_watchdog structure. + * With id == 0, setup a domain watchdog timer to cause domain shutdown + * after timeout, returns watchdog id. + * With id != 0 and timeout == 0, destroy domain watchdog timer. + * With id != 0 and timeout != 0, poke watchdog timer and set new timeout. + */ +#define SCHEDOP_watchdog 6 + +/* + * Override the current vcpu affinity by pinning it to one physical cpu or + * undo this override restoring the previous affinity. + * @arg == pointer to sched_pin_override structure. + * + * A negative pcpu value will undo a previous pin override and restore the + * previous cpu affinity. + * This call is allowed for the hardware domain only and requires the cpu + * to be part of the domain's cpupool. + */ +#define SCHEDOP_pin_override 7 + +struct sched_shutdown { + unsigned int reason; /* SHUTDOWN_* => shutdown reason */ +}; +DEFINE_GUEST_HANDLE_STRUCT(sched_shutdown); + +struct sched_poll { + GUEST_HANDLE(evtchn_port_t) ports; + unsigned int nr_ports; + uint64_t timeout; +}; +DEFINE_GUEST_HANDLE_STRUCT(sched_poll); + +struct sched_remote_shutdown { + domid_t domain_id; /* Remote domain ID */ + unsigned int reason; /* SHUTDOWN_* => shutdown reason */ +}; +DEFINE_GUEST_HANDLE_STRUCT(sched_remote_shutdown); + +struct sched_watchdog { + uint32_t id; /* watchdog ID */ + uint32_t timeout; /* timeout */ +}; +DEFINE_GUEST_HANDLE_STRUCT(sched_watchdog); + +struct sched_pin_override { + int32_t pcpu; +}; +DEFINE_GUEST_HANDLE_STRUCT(sched_pin_override); + +/* + * Reason codes for SCHEDOP_shutdown. These may be interpreted by control + * software to determine the appropriate action. For the most part, Xen does + * not care about the shutdown code. + */ +#define SHUTDOWN_poweroff 0 /* Domain exited normally. Clean up and kill. */ +#define SHUTDOWN_reboot 1 /* Clean up, kill, and then restart. */ +#define SHUTDOWN_suspend 2 /* Clean up, save suspend info, kill. */ +#define SHUTDOWN_crash 3 /* Tell controller we've crashed. */ +#define SHUTDOWN_watchdog 4 /* Restart because watchdog time expired. */ + +/* + * Domain asked to perform 'soft reset' for it. The expected behavior is to + * reset internal Xen state for the domain returning it to the point where it + * was created but leaving the domain's memory contents and vCPU contexts + * intact. This will allow the domain to start over and set up all Xen specific + * interfaces again. + */ +#define SHUTDOWN_soft_reset 5 +#define SHUTDOWN_MAX 5 /* Maximum valid shutdown reason. */ + +#endif /* __XEN_PUBLIC_SCHED_H__ */ -- cgit v1.2.3