From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/debug/kdb/kdb_bt.c | 221 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 221 insertions(+) create mode 100644 kernel/debug/kdb/kdb_bt.c (limited to 'kernel/debug/kdb/kdb_bt.c') diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c new file mode 100644 index 000000000..10b454554 --- /dev/null +++ b/kernel/debug/kdb/kdb_bt.c @@ -0,0 +1,221 @@ +/* + * Kernel Debugger Architecture Independent Stack Traceback + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2004 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2009 Wind River Systems, Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "kdb_private.h" + + +static void kdb_show_stack(struct task_struct *p, void *addr) +{ + kdb_trap_printk++; + + if (!addr && kdb_task_has_cpu(p)) { + int old_lvl = console_loglevel; + + console_loglevel = CONSOLE_LOGLEVEL_MOTORMOUTH; + kdb_dump_stack_on_cpu(kdb_process_cpu(p)); + console_loglevel = old_lvl; + } else { + show_stack(p, addr, KERN_EMERG); + } + + kdb_trap_printk--; +} + +/* + * kdb_bt + * + * This function implements the 'bt' command. Print a stack + * traceback. + * + * bt [] (addr-exp is for alternate stacks) + * btp Kernel stack for + * btt Kernel stack for task structure at + * + * bta [state_chars>|A] All useful processes, optionally + * filtered by state + * btc [] The current process on one cpu, + * default is all cpus + * + * bt refers to a address on the stack, that location + * is assumed to contain a return address. + * + * btt refers to the address of a struct task. + * + * Inputs: + * argc argument count + * argv argument vector + * Outputs: + * None. + * Returns: + * zero for success, a kdb diagnostic if error + * Locking: + * none. + * Remarks: + * Backtrack works best when the code uses frame pointers. But even + * without frame pointers we should get a reasonable trace. + * + * mds comes in handy when examining the stack to do a manual traceback or + * to get a starting point for bt . + */ + +static int +kdb_bt1(struct task_struct *p, const char *mask, bool btaprompt) +{ + char ch; + + if (kdb_getarea(ch, (unsigned long)p) || + kdb_getarea(ch, (unsigned long)(p+1)-1)) + return KDB_BADADDR; + if (!kdb_task_state(p, mask)) + return 0; + kdb_printf("Stack traceback for pid %d\n", p->pid); + kdb_ps1(p); + kdb_show_stack(p, NULL); + if (btaprompt) { + kdb_printf("Enter to end, or to continue:"); + do { + ch = kdb_getchar(); + } while (!strchr("\r\n q", ch)); + kdb_printf("\n"); + + /* reset the pager */ + kdb_nextline = 1; + + if (ch == 'q') + return 1; + } + touch_nmi_watchdog(); + return 0; +} + +static void +kdb_bt_cpu(unsigned long cpu) +{ + struct task_struct *kdb_tsk; + + if (cpu >= num_possible_cpus() || !cpu_online(cpu)) { + kdb_printf("WARNING: no process for cpu %ld\n", cpu); + return; + } + + /* If a CPU failed to round up we could be here */ + kdb_tsk = KDB_TSK(cpu); + if (!kdb_tsk) { + kdb_printf("WARNING: no task for cpu %ld\n", cpu); + return; + } + + kdb_bt1(kdb_tsk, "A", false); +} + +int +kdb_bt(int argc, const char **argv) +{ + int diag; + int btaprompt = 1; + int nextarg; + unsigned long addr; + long offset; + + /* Prompt after each proc in bta */ + kdbgetintenv("BTAPROMPT", &btaprompt); + + if (strcmp(argv[0], "bta") == 0) { + struct task_struct *g, *p; + unsigned long cpu; + const char *mask = argc ? argv[1] : kdbgetenv("PS"); + + if (argc == 0) + kdb_ps_suppressed(); + /* Run the active tasks first */ + for_each_online_cpu(cpu) { + p = kdb_curr_task(cpu); + if (kdb_bt1(p, mask, btaprompt)) + return 0; + } + /* Now the inactive tasks */ + for_each_process_thread(g, p) { + if (KDB_FLAG(CMD_INTERRUPT)) + return 0; + if (task_curr(p)) + continue; + if (kdb_bt1(p, mask, btaprompt)) + return 0; + } + } else if (strcmp(argv[0], "btp") == 0) { + struct task_struct *p; + unsigned long pid; + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &pid); + if (diag) + return diag; + p = find_task_by_pid_ns(pid, &init_pid_ns); + if (p) + return kdb_bt1(p, "A", false); + kdb_printf("No process with pid == %ld found\n", pid); + return 0; + } else if (strcmp(argv[0], "btt") == 0) { + if (argc != 1) + return KDB_ARGCOUNT; + diag = kdbgetularg((char *)argv[1], &addr); + if (diag) + return diag; + return kdb_bt1((struct task_struct *)addr, "A", false); + } else if (strcmp(argv[0], "btc") == 0) { + unsigned long cpu = ~0; + if (argc > 1) + return KDB_ARGCOUNT; + if (argc == 1) { + diag = kdbgetularg((char *)argv[1], &cpu); + if (diag) + return diag; + } + if (cpu != ~0) { + kdb_bt_cpu(cpu); + } else { + /* + * Recursive use of kdb_parse, do not use argv after + * this point. + */ + argv = NULL; + kdb_printf("btc: cpu status: "); + kdb_parse("cpu\n"); + for_each_online_cpu(cpu) { + kdb_bt_cpu(cpu); + touch_nmi_watchdog(); + } + } + return 0; + } else { + if (argc) { + nextarg = 1; + diag = kdbgetaddrarg(argc, argv, &nextarg, &addr, + &offset, NULL); + if (diag) + return diag; + kdb_show_stack(kdb_current_task, (void *)addr); + return 0; + } else { + return kdb_bt1(kdb_current_task, "A", false); + } + } + + /* NOTREACHED */ + return 0; +} -- cgit v1.2.3