From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/irq/timings.c | 958 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 958 insertions(+) create mode 100644 kernel/irq/timings.c (limited to 'kernel/irq/timings.c') diff --git a/kernel/irq/timings.c b/kernel/irq/timings.c new file mode 100644 index 000000000..c43e2ac2f --- /dev/null +++ b/kernel/irq/timings.c @@ -0,0 +1,958 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2016, Linaro Ltd - Daniel Lezcano +#define pr_fmt(fmt) "irq_timings: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "internals.h" + +DEFINE_STATIC_KEY_FALSE(irq_timing_enabled); + +DEFINE_PER_CPU(struct irq_timings, irq_timings); + +static DEFINE_IDR(irqt_stats); + +void irq_timings_enable(void) +{ + static_branch_enable(&irq_timing_enabled); +} + +void irq_timings_disable(void) +{ + static_branch_disable(&irq_timing_enabled); +} + +/* + * The main goal of this algorithm is to predict the next interrupt + * occurrence on the current CPU. + * + * Currently, the interrupt timings are stored in a circular array + * buffer every time there is an interrupt, as a tuple: the interrupt + * number and the associated timestamp when the event occurred . + * + * For every interrupt occurring in a short period of time, we can + * measure the elapsed time between the occurrences for the same + * interrupt and we end up with a suite of intervals. The experience + * showed the interrupts are often coming following a periodic + * pattern. + * + * The objective of the algorithm is to find out this periodic pattern + * in a fastest way and use its period to predict the next irq event. + * + * When the next interrupt event is requested, we are in the situation + * where the interrupts are disabled and the circular buffer + * containing the timings is filled with the events which happened + * after the previous next-interrupt-event request. + * + * At this point, we read the circular buffer and we fill the irq + * related statistics structure. After this step, the circular array + * containing the timings is empty because all the values are + * dispatched in their corresponding buffers. + * + * Now for each interrupt, we can predict the next event by using the + * suffix array, log interval and exponential moving average + * + * 1. Suffix array + * + * Suffix array is an array of all the suffixes of a string. It is + * widely used as a data structure for compression, text search, ... + * For instance for the word 'banana', the suffixes will be: 'banana' + * 'anana' 'nana' 'ana' 'na' 'a' + * + * Usually, the suffix array is sorted but for our purpose it is + * not necessary and won't provide any improvement in the context of + * the solved problem where we clearly define the boundaries of the + * search by a max period and min period. + * + * The suffix array will build a suite of intervals of different + * length and will look for the repetition of each suite. If the suite + * is repeating then we have the period because it is the length of + * the suite whatever its position in the buffer. + * + * 2. Log interval + * + * We saw the irq timings allow to compute the interval of the + * occurrences for a specific interrupt. We can reasonably assume the + * longer is the interval, the higher is the error for the next event + * and we can consider storing those interval values into an array + * where each slot in the array correspond to an interval at the power + * of 2 of the index. For example, index 12 will contain values + * between 2^11 and 2^12. + * + * At the end we have an array of values where at each index defines a + * [2^index - 1, 2 ^ index] interval values allowing to store a large + * number of values inside a small array. + * + * For example, if we have the value 1123, then we store it at + * ilog2(1123) = 10 index value. + * + * Storing those value at the specific index is done by computing an + * exponential moving average for this specific slot. For instance, + * for values 1800, 1123, 1453, ... fall under the same slot (10) and + * the exponential moving average is computed every time a new value + * is stored at this slot. + * + * 3. Exponential Moving Average + * + * The EMA is largely used to track a signal for stocks or as a low + * pass filter. The magic of the formula, is it is very simple and the + * reactivity of the average can be tuned with the factors called + * alpha. + * + * The higher the alphas are, the faster the average respond to the + * signal change. In our case, if a slot in the array is a big + * interval, we can have numbers with a big difference between + * them. The impact of those differences in the average computation + * can be tuned by changing the alpha value. + * + * + * -- The algorithm -- + * + * We saw the different processing above, now let's see how they are + * used together. + * + * For each interrupt: + * For each interval: + * Compute the index = ilog2(interval) + * Compute a new_ema(buffer[index], interval) + * Store the index in a circular buffer + * + * Compute the suffix array of the indexes + * + * For each suffix: + * If the suffix is reverse-found 3 times + * Return suffix + * + * Return Not found + * + * However we can not have endless suffix array to be build, it won't + * make sense and it will add an extra overhead, so we can restrict + * this to a maximum suffix length of 5 and a minimum suffix length of + * 2. The experience showed 5 is the majority of the maximum pattern + * period found for different devices. + * + * The result is a pattern finding less than 1us for an interrupt. + * + * Example based on real values: + * + * Example 1 : MMC write/read interrupt interval: + * + * 223947, 1240, 1384, 1386, 1386, + * 217416, 1236, 1384, 1386, 1387, + * 214719, 1241, 1386, 1387, 1384, + * 213696, 1234, 1384, 1386, 1388, + * 219904, 1240, 1385, 1389, 1385, + * 212240, 1240, 1386, 1386, 1386, + * 214415, 1236, 1384, 1386, 1387, + * 214276, 1234, 1384, 1388, ? + * + * For each element, apply ilog2(value) + * + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, ? + * + * Max period of 5, we take the last (max_period * 3) 15 elements as + * we can be confident if the pattern repeats itself three times it is + * a repeating pattern. + * + * 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, 8, + * 15, 8, 8, 8, ? + * + * Suffixes are: + * + * 1) 8, 15, 8, 8, 8 <- max period + * 2) 8, 15, 8, 8 + * 3) 8, 15, 8 + * 4) 8, 15 <- min period + * + * From there we search the repeating pattern for each suffix. + * + * buffer: 8, 15, 8, 8, 8, 8, 15, 8, 8, 8, 8, 15, 8, 8, 8 + * | | | | | | | | | | | | | | | + * 8, 15, 8, 8, 8 | | | | | | | | | | + * 8, 15, 8, 8, 8 | | | | | + * 8, 15, 8, 8, 8 + * + * When moving the suffix, we found exactly 3 matches. + * + * The first suffix with period 5 is repeating. + * + * The next event is (3 * max_period) % suffix_period + * + * In this example, the result 0, so the next event is suffix[0] => 8 + * + * However, 8 is the index in the array of exponential moving average + * which was calculated on the fly when storing the values, so the + * interval is ema[8] = 1366 + * + * + * Example 2: + * + * 4, 3, 5, 100, + * 3, 3, 5, 117, + * 4, 4, 5, 112, + * 4, 3, 4, 110, + * 3, 5, 3, 117, + * 4, 4, 5, 112, + * 4, 3, 4, 110, + * 3, 4, 5, 112, + * 4, 3, 4, 110 + * + * ilog2 + * + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4 + * + * Max period 5: + * 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4, + * 0, 0, 0, 4 + * + * Suffixes: + * + * 1) 0, 0, 4, 0, 0 + * 2) 0, 0, 4, 0 + * 3) 0, 0, 4 + * 4) 0, 0 + * + * buffer: 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4 + * | | | | | | X + * 0, 0, 4, 0, 0, | X + * 0, 0 + * + * buffer: 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4, 0, 0, 0, 4 + * | | | | | | | | | | | | | | | + * 0, 0, 4, 0, | | | | | | | | | | | + * 0, 0, 4, 0, | | | | | | | + * 0, 0, 4, 0, | | | + * 0 0 4 + * + * Pattern is found 3 times, the remaining is 1 which results from + * (max_period * 3) % suffix_period. This value is the index in the + * suffix arrays. The suffix array for a period 4 has the value 4 + * at index 1. + */ +#define EMA_ALPHA_VAL 64 +#define EMA_ALPHA_SHIFT 7 + +#define PREDICTION_PERIOD_MIN 3 +#define PREDICTION_PERIOD_MAX 5 +#define PREDICTION_FACTOR 4 +#define PREDICTION_MAX 10 /* 2 ^ PREDICTION_MAX useconds */ +#define PREDICTION_BUFFER_SIZE 16 /* slots for EMAs, hardly more than 16 */ + +/* + * Number of elements in the circular buffer: If it happens it was + * flushed before, then the number of elements could be smaller than + * IRQ_TIMINGS_SIZE, so the count is used, otherwise the array size is + * used as we wrapped. The index begins from zero when we did not + * wrap. That could be done in a nicer way with the proper circular + * array structure type but with the cost of extra computation in the + * interrupt handler hot path. We choose efficiency. + */ +#define for_each_irqts(i, irqts) \ + for (i = irqts->count < IRQ_TIMINGS_SIZE ? \ + 0 : irqts->count & IRQ_TIMINGS_MASK, \ + irqts->count = min(IRQ_TIMINGS_SIZE, \ + irqts->count); \ + irqts->count > 0; irqts->count--, \ + i = (i + 1) & IRQ_TIMINGS_MASK) + +struct irqt_stat { + u64 last_ts; + u64 ema_time[PREDICTION_BUFFER_SIZE]; + int timings[IRQ_TIMINGS_SIZE]; + int circ_timings[IRQ_TIMINGS_SIZE]; + int count; +}; + +/* + * Exponential moving average computation + */ +static u64 irq_timings_ema_new(u64 value, u64 ema_old) +{ + s64 diff; + + if (unlikely(!ema_old)) + return value; + + diff = (value - ema_old) * EMA_ALPHA_VAL; + /* + * We can use a s64 type variable to be added with the u64 + * ema_old variable as this one will never have its topmost + * bit set, it will be always smaller than 2^63 nanosec + * interrupt interval (292 years). + */ + return ema_old + (diff >> EMA_ALPHA_SHIFT); +} + +static int irq_timings_next_event_index(int *buffer, size_t len, int period_max) +{ + int period; + + /* + * Move the beginning pointer to the end minus the max period x 3. + * We are at the point we can begin searching the pattern + */ + buffer = &buffer[len - (period_max * 3)]; + + /* Adjust the length to the maximum allowed period x 3 */ + len = period_max * 3; + + /* + * The buffer contains the suite of intervals, in a ilog2 + * basis, we are looking for a repetition. We point the + * beginning of the search three times the length of the + * period beginning at the end of the buffer. We do that for + * each suffix. + */ + for (period = period_max; period >= PREDICTION_PERIOD_MIN; period--) { + + /* + * The first comparison always succeed because the + * suffix is deduced from the first n-period bytes of + * the buffer and we compare the initial suffix with + * itself, so we can skip the first iteration. + */ + int idx = period; + size_t size = period; + + /* + * We look if the suite with period 'i' repeat + * itself. If it is truncated at the end, as it + * repeats we can use the period to find out the next + * element with the modulo. + */ + while (!memcmp(buffer, &buffer[idx], size * sizeof(int))) { + + /* + * Move the index in a period basis + */ + idx += size; + + /* + * If this condition is reached, all previous + * memcmp were successful, so the period is + * found. + */ + if (idx == len) + return buffer[len % period]; + + /* + * If the remaining elements to compare are + * smaller than the period, readjust the size + * of the comparison for the last iteration. + */ + if (len - idx < period) + size = len - idx; + } + } + + return -1; +} + +static u64 __irq_timings_next_event(struct irqt_stat *irqs, int irq, u64 now) +{ + int index, i, period_max, count, start, min = INT_MAX; + + if ((now - irqs->last_ts) >= NSEC_PER_SEC) { + irqs->count = irqs->last_ts = 0; + return U64_MAX; + } + + /* + * As we want to find three times the repetition, we need a + * number of intervals greater or equal to three times the + * maximum period, otherwise we truncate the max period. + */ + period_max = irqs->count > (3 * PREDICTION_PERIOD_MAX) ? + PREDICTION_PERIOD_MAX : irqs->count / 3; + + /* + * If we don't have enough irq timings for this prediction, + * just bail out. + */ + if (period_max <= PREDICTION_PERIOD_MIN) + return U64_MAX; + + /* + * 'count' will depends if the circular buffer wrapped or not + */ + count = irqs->count < IRQ_TIMINGS_SIZE ? + irqs->count : IRQ_TIMINGS_SIZE; + + start = irqs->count < IRQ_TIMINGS_SIZE ? + 0 : (irqs->count & IRQ_TIMINGS_MASK); + + /* + * Copy the content of the circular buffer into another buffer + * in order to linearize the buffer instead of dealing with + * wrapping indexes and shifted array which will be prone to + * error and extremely difficult to debug. + */ + for (i = 0; i < count; i++) { + int index = (start + i) & IRQ_TIMINGS_MASK; + + irqs->timings[i] = irqs->circ_timings[index]; + min = min_t(int, irqs->timings[i], min); + } + + index = irq_timings_next_event_index(irqs->timings, count, period_max); + if (index < 0) + return irqs->last_ts + irqs->ema_time[min]; + + return irqs->last_ts + irqs->ema_time[index]; +} + +static __always_inline int irq_timings_interval_index(u64 interval) +{ + /* + * The PREDICTION_FACTOR increase the interval size for the + * array of exponential average. + */ + u64 interval_us = (interval >> 10) / PREDICTION_FACTOR; + + return likely(interval_us) ? ilog2(interval_us) : 0; +} + +static __always_inline void __irq_timings_store(int irq, struct irqt_stat *irqs, + u64 interval) +{ + int index; + + /* + * Get the index in the ema table for this interrupt. + */ + index = irq_timings_interval_index(interval); + + if (index > PREDICTION_BUFFER_SIZE - 1) { + irqs->count = 0; + return; + } + + /* + * Store the index as an element of the pattern in another + * circular array. + */ + irqs->circ_timings[irqs->count & IRQ_TIMINGS_MASK] = index; + + irqs->ema_time[index] = irq_timings_ema_new(interval, + irqs->ema_time[index]); + + irqs->count++; +} + +static inline void irq_timings_store(int irq, struct irqt_stat *irqs, u64 ts) +{ + u64 old_ts = irqs->last_ts; + u64 interval; + + /* + * The timestamps are absolute time values, we need to compute + * the timing interval between two interrupts. + */ + irqs->last_ts = ts; + + /* + * The interval type is u64 in order to deal with the same + * type in our computation, that prevent mindfuck issues with + * overflow, sign and division. + */ + interval = ts - old_ts; + + /* + * The interrupt triggered more than one second apart, that + * ends the sequence as predictable for our purpose. In this + * case, assume we have the beginning of a sequence and the + * timestamp is the first value. As it is impossible to + * predict anything at this point, return. + * + * Note the first timestamp of the sequence will always fall + * in this test because the old_ts is zero. That is what we + * want as we need another timestamp to compute an interval. + */ + if (interval >= NSEC_PER_SEC) { + irqs->count = 0; + return; + } + + __irq_timings_store(irq, irqs, interval); +} + +/** + * irq_timings_next_event - Return when the next event is supposed to arrive + * + * During the last busy cycle, the number of interrupts is incremented + * and stored in the irq_timings structure. This information is + * necessary to: + * + * - know if the index in the table wrapped up: + * + * If more than the array size interrupts happened during the + * last busy/idle cycle, the index wrapped up and we have to + * begin with the next element in the array which is the last one + * in the sequence, otherwise it is at the index 0. + * + * - have an indication of the interrupts activity on this CPU + * (eg. irq/sec) + * + * The values are 'consumed' after inserting in the statistical model, + * thus the count is reinitialized. + * + * The array of values **must** be browsed in the time direction, the + * timestamp must increase between an element and the next one. + * + * Returns a nanosec time based estimation of the earliest interrupt, + * U64_MAX otherwise. + */ +u64 irq_timings_next_event(u64 now) +{ + struct irq_timings *irqts = this_cpu_ptr(&irq_timings); + struct irqt_stat *irqs; + struct irqt_stat __percpu *s; + u64 ts, next_evt = U64_MAX; + int i, irq = 0; + + /* + * This function must be called with the local irq disabled in + * order to prevent the timings circular buffer to be updated + * while we are reading it. + */ + lockdep_assert_irqs_disabled(); + + if (!irqts->count) + return next_evt; + + /* + * Number of elements in the circular buffer: If it happens it + * was flushed before, then the number of elements could be + * smaller than IRQ_TIMINGS_SIZE, so the count is used, + * otherwise the array size is used as we wrapped. The index + * begins from zero when we did not wrap. That could be done + * in a nicer way with the proper circular array structure + * type but with the cost of extra computation in the + * interrupt handler hot path. We choose efficiency. + * + * Inject measured irq/timestamp to the pattern prediction + * model while decrementing the counter because we consume the + * data from our circular buffer. + */ + for_each_irqts(i, irqts) { + irq = irq_timing_decode(irqts->values[i], &ts); + s = idr_find(&irqt_stats, irq); + if (s) + irq_timings_store(irq, this_cpu_ptr(s), ts); + } + + /* + * Look in the list of interrupts' statistics, the earliest + * next event. + */ + idr_for_each_entry(&irqt_stats, s, i) { + + irqs = this_cpu_ptr(s); + + ts = __irq_timings_next_event(irqs, i, now); + if (ts <= now) + return now; + + if (ts < next_evt) + next_evt = ts; + } + + return next_evt; +} + +void irq_timings_free(int irq) +{ + struct irqt_stat __percpu *s; + + s = idr_find(&irqt_stats, irq); + if (s) { + free_percpu(s); + idr_remove(&irqt_stats, irq); + } +} + +int irq_timings_alloc(int irq) +{ + struct irqt_stat __percpu *s; + int id; + + /* + * Some platforms can have the same private interrupt per cpu, + * so this function may be called several times with the + * same interrupt number. Just bail out in case the per cpu + * stat structure is already allocated. + */ + s = idr_find(&irqt_stats, irq); + if (s) + return 0; + + s = alloc_percpu(*s); + if (!s) + return -ENOMEM; + + idr_preload(GFP_KERNEL); + id = idr_alloc(&irqt_stats, s, irq, irq + 1, GFP_NOWAIT); + idr_preload_end(); + + if (id < 0) { + free_percpu(s); + return id; + } + + return 0; +} + +#ifdef CONFIG_TEST_IRQ_TIMINGS +struct timings_intervals { + u64 *intervals; + size_t count; +}; + +/* + * Intervals are given in nanosecond base + */ +static u64 intervals0[] __initdata = { + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, 500000, + 10000, 50000, 200000, +}; + +static u64 intervals1[] __initdata = { + 223947000, 1240000, 1384000, 1386000, 1386000, + 217416000, 1236000, 1384000, 1386000, 1387000, + 214719000, 1241000, 1386000, 1387000, 1384000, + 213696000, 1234000, 1384000, 1386000, 1388000, + 219904000, 1240000, 1385000, 1389000, 1385000, + 212240000, 1240000, 1386000, 1386000, 1386000, + 214415000, 1236000, 1384000, 1386000, 1387000, + 214276000, 1234000, +}; + +static u64 intervals2[] __initdata = { + 4000, 3000, 5000, 100000, + 3000, 3000, 5000, 117000, + 4000, 4000, 5000, 112000, + 4000, 3000, 4000, 110000, + 3000, 5000, 3000, 117000, + 4000, 4000, 5000, 112000, + 4000, 3000, 4000, 110000, + 3000, 4000, 5000, 112000, + 4000, +}; + +static u64 intervals3[] __initdata = { + 1385000, 212240000, 1240000, + 1386000, 214415000, 1236000, + 1384000, 214276000, 1234000, + 1386000, 214415000, 1236000, + 1385000, 212240000, 1240000, + 1386000, 214415000, 1236000, + 1384000, 214276000, 1234000, + 1386000, 214415000, 1236000, + 1385000, 212240000, 1240000, +}; + +static u64 intervals4[] __initdata = { + 10000, 50000, 10000, 50000, + 10000, 50000, 10000, 50000, + 10000, 50000, 10000, 50000, + 10000, 50000, 10000, 50000, + 10000, 50000, 10000, 50000, + 10000, 50000, 10000, 50000, + 10000, 50000, 10000, 50000, + 10000, 50000, 10000, 50000, + 10000, +}; + +static struct timings_intervals tis[] __initdata = { + { intervals0, ARRAY_SIZE(intervals0) }, + { intervals1, ARRAY_SIZE(intervals1) }, + { intervals2, ARRAY_SIZE(intervals2) }, + { intervals3, ARRAY_SIZE(intervals3) }, + { intervals4, ARRAY_SIZE(intervals4) }, +}; + +static int __init irq_timings_test_next_index(struct timings_intervals *ti) +{ + int _buffer[IRQ_TIMINGS_SIZE]; + int buffer[IRQ_TIMINGS_SIZE]; + int index, start, i, count, period_max; + + count = ti->count - 1; + + period_max = count > (3 * PREDICTION_PERIOD_MAX) ? + PREDICTION_PERIOD_MAX : count / 3; + + /* + * Inject all values except the last one which will be used + * to compare with the next index result. + */ + pr_debug("index suite: "); + + for (i = 0; i < count; i++) { + index = irq_timings_interval_index(ti->intervals[i]); + _buffer[i & IRQ_TIMINGS_MASK] = index; + pr_cont("%d ", index); + } + + start = count < IRQ_TIMINGS_SIZE ? 0 : + count & IRQ_TIMINGS_MASK; + + count = min_t(int, count, IRQ_TIMINGS_SIZE); + + for (i = 0; i < count; i++) { + int index = (start + i) & IRQ_TIMINGS_MASK; + buffer[i] = _buffer[index]; + } + + index = irq_timings_next_event_index(buffer, count, period_max); + i = irq_timings_interval_index(ti->intervals[ti->count - 1]); + + if (index != i) { + pr_err("Expected (%d) and computed (%d) next indexes differ\n", + i, index); + return -EINVAL; + } + + return 0; +} + +static int __init irq_timings_next_index_selftest(void) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(tis); i++) { + + pr_info("---> Injecting intervals number #%d (count=%zd)\n", + i, tis[i].count); + + ret = irq_timings_test_next_index(&tis[i]); + if (ret) + break; + } + + return ret; +} + +static int __init irq_timings_test_irqs(struct timings_intervals *ti) +{ + struct irqt_stat __percpu *s; + struct irqt_stat *irqs; + int i, index, ret, irq = 0xACE5; + + ret = irq_timings_alloc(irq); + if (ret) { + pr_err("Failed to allocate irq timings\n"); + return ret; + } + + s = idr_find(&irqt_stats, irq); + if (!s) { + ret = -EIDRM; + goto out; + } + + irqs = this_cpu_ptr(s); + + for (i = 0; i < ti->count; i++) { + + index = irq_timings_interval_index(ti->intervals[i]); + pr_debug("%d: interval=%llu ema_index=%d\n", + i, ti->intervals[i], index); + + __irq_timings_store(irq, irqs, ti->intervals[i]); + if (irqs->circ_timings[i & IRQ_TIMINGS_MASK] != index) { + ret = -EBADSLT; + pr_err("Failed to store in the circular buffer\n"); + goto out; + } + } + + if (irqs->count != ti->count) { + ret = -ERANGE; + pr_err("Count differs\n"); + goto out; + } + + ret = 0; +out: + irq_timings_free(irq); + + return ret; +} + +static int __init irq_timings_irqs_selftest(void) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(tis); i++) { + pr_info("---> Injecting intervals number #%d (count=%zd)\n", + i, tis[i].count); + ret = irq_timings_test_irqs(&tis[i]); + if (ret) + break; + } + + return ret; +} + +static int __init irq_timings_test_irqts(struct irq_timings *irqts, + unsigned count) +{ + int start = count >= IRQ_TIMINGS_SIZE ? count - IRQ_TIMINGS_SIZE : 0; + int i, irq, oirq = 0xBEEF; + u64 ots = 0xDEAD, ts; + + /* + * Fill the circular buffer by using the dedicated function. + */ + for (i = 0; i < count; i++) { + pr_debug("%d: index=%d, ts=%llX irq=%X\n", + i, i & IRQ_TIMINGS_MASK, ots + i, oirq + i); + + irq_timings_push(ots + i, oirq + i); + } + + /* + * Compute the first elements values after the index wrapped + * up or not. + */ + ots += start; + oirq += start; + + /* + * Test the circular buffer count is correct. + */ + pr_debug("---> Checking timings array count (%d) is right\n", count); + if (WARN_ON(irqts->count != count)) + return -EINVAL; + + /* + * Test the macro allowing to browse all the irqts. + */ + pr_debug("---> Checking the for_each_irqts() macro\n"); + for_each_irqts(i, irqts) { + + irq = irq_timing_decode(irqts->values[i], &ts); + + pr_debug("index=%d, ts=%llX / %llX, irq=%X / %X\n", + i, ts, ots, irq, oirq); + + if (WARN_ON(ts != ots || irq != oirq)) + return -EINVAL; + + ots++; oirq++; + } + + /* + * The circular buffer should have be flushed when browsed + * with for_each_irqts + */ + pr_debug("---> Checking timings array is empty after browsing it\n"); + if (WARN_ON(irqts->count)) + return -EINVAL; + + return 0; +} + +static int __init irq_timings_irqts_selftest(void) +{ + struct irq_timings *irqts = this_cpu_ptr(&irq_timings); + int i, ret; + + /* + * Test the circular buffer with different number of + * elements. The purpose is to test at the limits (empty, half + * full, full, wrapped with the cursor at the boundaries, + * wrapped several times, etc ... + */ + int count[] = { 0, + IRQ_TIMINGS_SIZE >> 1, + IRQ_TIMINGS_SIZE, + IRQ_TIMINGS_SIZE + (IRQ_TIMINGS_SIZE >> 1), + 2 * IRQ_TIMINGS_SIZE, + (2 * IRQ_TIMINGS_SIZE) + 3, + }; + + for (i = 0; i < ARRAY_SIZE(count); i++) { + + pr_info("---> Checking the timings with %d/%d values\n", + count[i], IRQ_TIMINGS_SIZE); + + ret = irq_timings_test_irqts(irqts, count[i]); + if (ret) + break; + } + + return ret; +} + +static int __init irq_timings_selftest(void) +{ + int ret; + + pr_info("------------------- selftest start -----------------\n"); + + /* + * At this point, we don't except any subsystem to use the irq + * timings but us, so it should not be enabled. + */ + if (static_branch_unlikely(&irq_timing_enabled)) { + pr_warn("irq timings already initialized, skipping selftest\n"); + return 0; + } + + ret = irq_timings_irqts_selftest(); + if (ret) + goto out; + + ret = irq_timings_irqs_selftest(); + if (ret) + goto out; + + ret = irq_timings_next_index_selftest(); +out: + pr_info("---------- selftest end with %s -----------\n", + ret ? "failure" : "success"); + + return ret; +} +early_initcall(irq_timings_selftest); +#endif -- cgit v1.2.3