From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/kmod.c | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 kernel/kmod.c (limited to 'kernel/kmod.c') diff --git a/kernel/kmod.c b/kernel/kmod.c new file mode 100644 index 000000000..b717134eb --- /dev/null +++ b/kernel/kmod.c @@ -0,0 +1,177 @@ +/* + * kmod - the kernel module loader + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * Assuming: + * + * threads = div64_u64((u64) totalram_pages * (u64) PAGE_SIZE, + * (u64) THREAD_SIZE * 8UL); + * + * If you need less than 50 threads would mean we're dealing with systems + * smaller than 3200 pages. This assumes you are capable of having ~13M memory, + * and this would only be an upper limit, after which the OOM killer would take + * effect. Systems like these are very unlikely if modules are enabled. + */ +#define MAX_KMOD_CONCURRENT 50 +static atomic_t kmod_concurrent_max = ATOMIC_INIT(MAX_KMOD_CONCURRENT); +static DECLARE_WAIT_QUEUE_HEAD(kmod_wq); + +/* + * This is a restriction on having *all* MAX_KMOD_CONCURRENT threads + * running at the same time without returning. When this happens we + * believe you've somehow ended up with a recursive module dependency + * creating a loop. + * + * We have no option but to fail. + * + * Userspace should proactively try to detect and prevent these. + */ +#define MAX_KMOD_ALL_BUSY_TIMEOUT 5 + +/* + modprobe_path is set via /proc/sys. +*/ +char modprobe_path[KMOD_PATH_LEN] = CONFIG_MODPROBE_PATH; + +static void free_modprobe_argv(struct subprocess_info *info) +{ + kfree(info->argv[3]); /* check call_modprobe() */ + kfree(info->argv); +} + +static int call_modprobe(char *module_name, int wait) +{ + struct subprocess_info *info; + static char *envp[] = { + "HOME=/", + "TERM=linux", + "PATH=/sbin:/usr/sbin:/bin:/usr/bin", + NULL + }; + + char **argv = kmalloc(sizeof(char *[5]), GFP_KERNEL); + if (!argv) + goto out; + + module_name = kstrdup(module_name, GFP_KERNEL); + if (!module_name) + goto free_argv; + + argv[0] = modprobe_path; + argv[1] = "-q"; + argv[2] = "--"; + argv[3] = module_name; /* check free_modprobe_argv() */ + argv[4] = NULL; + + info = call_usermodehelper_setup(modprobe_path, argv, envp, GFP_KERNEL, + NULL, free_modprobe_argv, NULL); + if (!info) + goto free_module_name; + + return call_usermodehelper_exec(info, wait | UMH_KILLABLE); + +free_module_name: + kfree(module_name); +free_argv: + kfree(argv); +out: + return -ENOMEM; +} + +/** + * __request_module - try to load a kernel module + * @wait: wait (or not) for the operation to complete + * @fmt: printf style format string for the name of the module + * @...: arguments as specified in the format string + * + * Load a module using the user mode module loader. The function returns + * zero on success or a negative errno code or positive exit code from + * "modprobe" on failure. Note that a successful module load does not mean + * the module did not then unload and exit on an error of its own. Callers + * must check that the service they requested is now available not blindly + * invoke it. + * + * If module auto-loading support is disabled then this function + * simply returns -ENOENT. + */ +int __request_module(bool wait, const char *fmt, ...) +{ + va_list args; + char module_name[MODULE_NAME_LEN]; + int ret; + + /* + * We don't allow synchronous module loading from async. Module + * init may invoke async_synchronize_full() which will end up + * waiting for this task which already is waiting for the module + * loading to complete, leading to a deadlock. + */ + WARN_ON_ONCE(wait && current_is_async()); + + if (!modprobe_path[0]) + return -ENOENT; + + va_start(args, fmt); + ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args); + va_end(args); + if (ret >= MODULE_NAME_LEN) + return -ENAMETOOLONG; + + ret = security_kernel_module_request(module_name); + if (ret) + return ret; + + if (atomic_dec_if_positive(&kmod_concurrent_max) < 0) { + pr_warn_ratelimited("request_module: kmod_concurrent_max (%u) close to 0 (max_modprobes: %u), for module %s, throttling...", + atomic_read(&kmod_concurrent_max), + MAX_KMOD_CONCURRENT, module_name); + ret = wait_event_killable_timeout(kmod_wq, + atomic_dec_if_positive(&kmod_concurrent_max) >= 0, + MAX_KMOD_ALL_BUSY_TIMEOUT * HZ); + if (!ret) { + pr_warn_ratelimited("request_module: modprobe %s cannot be processed, kmod busy with %d threads for more than %d seconds now", + module_name, MAX_KMOD_CONCURRENT, MAX_KMOD_ALL_BUSY_TIMEOUT); + return -ETIME; + } else if (ret == -ERESTARTSYS) { + pr_warn_ratelimited("request_module: sigkill sent for modprobe %s, giving up", module_name); + return ret; + } + } + + trace_module_request(module_name, wait, _RET_IP_); + + ret = call_modprobe(module_name, wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC); + + atomic_inc(&kmod_concurrent_max); + wake_up(&kmod_wq); + + return ret; +} +EXPORT_SYMBOL(__request_module); -- cgit v1.2.3