From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/locking/osq_lock.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 kernel/locking/osq_lock.c (limited to 'kernel/locking/osq_lock.c') diff --git a/kernel/locking/osq_lock.c b/kernel/locking/osq_lock.c new file mode 100644 index 000000000..d5610ad52 --- /dev/null +++ b/kernel/locking/osq_lock.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +/* + * An MCS like lock especially tailored for optimistic spinning for sleeping + * lock implementations (mutex, rwsem, etc). + * + * Using a single mcs node per CPU is safe because sleeping locks should not be + * called from interrupt context and we have preemption disabled while + * spinning. + */ +static DEFINE_PER_CPU_SHARED_ALIGNED(struct optimistic_spin_node, osq_node); + +/* + * We use the value 0 to represent "no CPU", thus the encoded value + * will be the CPU number incremented by 1. + */ +static inline int encode_cpu(int cpu_nr) +{ + return cpu_nr + 1; +} + +static inline int node_cpu(struct optimistic_spin_node *node) +{ + return node->cpu - 1; +} + +static inline struct optimistic_spin_node *decode_cpu(int encoded_cpu_val) +{ + int cpu_nr = encoded_cpu_val - 1; + + return per_cpu_ptr(&osq_node, cpu_nr); +} + +/* + * Get a stable @node->next pointer, either for unlock() or unqueue() purposes. + * Can return NULL in case we were the last queued and we updated @lock instead. + */ +static inline struct optimistic_spin_node * +osq_wait_next(struct optimistic_spin_queue *lock, + struct optimistic_spin_node *node, + struct optimistic_spin_node *prev) +{ + struct optimistic_spin_node *next = NULL; + int curr = encode_cpu(smp_processor_id()); + int old; + + /* + * If there is a prev node in queue, then the 'old' value will be + * the prev node's CPU #, else it's set to OSQ_UNLOCKED_VAL since if + * we're currently last in queue, then the queue will then become empty. + */ + old = prev ? prev->cpu : OSQ_UNLOCKED_VAL; + + for (;;) { + if (atomic_read(&lock->tail) == curr && + atomic_cmpxchg_acquire(&lock->tail, curr, old) == curr) { + /* + * We were the last queued, we moved @lock back. @prev + * will now observe @lock and will complete its + * unlock()/unqueue(). + */ + break; + } + + /* + * We must xchg() the @node->next value, because if we were to + * leave it in, a concurrent unlock()/unqueue() from + * @node->next might complete Step-A and think its @prev is + * still valid. + * + * If the concurrent unlock()/unqueue() wins the race, we'll + * wait for either @lock to point to us, through its Step-B, or + * wait for a new @node->next from its Step-C. + */ + if (node->next) { + next = xchg(&node->next, NULL); + if (next) + break; + } + + cpu_relax(); + } + + return next; +} + +bool osq_lock(struct optimistic_spin_queue *lock) +{ + struct optimistic_spin_node *node = this_cpu_ptr(&osq_node); + struct optimistic_spin_node *prev, *next; + int curr = encode_cpu(smp_processor_id()); + int old; + + node->locked = 0; + node->next = NULL; + node->cpu = curr; + + /* + * We need both ACQUIRE (pairs with corresponding RELEASE in + * unlock() uncontended, or fastpath) and RELEASE (to publish + * the node fields we just initialised) semantics when updating + * the lock tail. + */ + old = atomic_xchg(&lock->tail, curr); + if (old == OSQ_UNLOCKED_VAL) + return true; + + prev = decode_cpu(old); + node->prev = prev; + + /* + * osq_lock() unqueue + * + * node->prev = prev osq_wait_next() + * WMB MB + * prev->next = node next->prev = prev // unqueue-C + * + * Here 'node->prev' and 'next->prev' are the same variable and we need + * to ensure these stores happen in-order to avoid corrupting the list. + */ + smp_wmb(); + + WRITE_ONCE(prev->next, node); + + /* + * Normally @prev is untouchable after the above store; because at that + * moment unlock can proceed and wipe the node element from stack. + * + * However, since our nodes are static per-cpu storage, we're + * guaranteed their existence -- this allows us to apply + * cmpxchg in an attempt to undo our queueing. + */ + + /* + * Wait to acquire the lock or cancellation. Note that need_resched() + * will come with an IPI, which will wake smp_cond_load_relaxed() if it + * is implemented with a monitor-wait. vcpu_is_preempted() relies on + * polling, be careful. + */ + if (smp_cond_load_relaxed(&node->locked, VAL || need_resched() || + vcpu_is_preempted(node_cpu(node->prev)))) + return true; + + /* unqueue */ + /* + * Step - A -- stabilize @prev + * + * Undo our @prev->next assignment; this will make @prev's + * unlock()/unqueue() wait for a next pointer since @lock points to us + * (or later). + */ + + for (;;) { + /* + * cpu_relax() below implies a compiler barrier which would + * prevent this comparison being optimized away. + */ + if (data_race(prev->next) == node && + cmpxchg(&prev->next, node, NULL) == node) + break; + + /* + * We can only fail the cmpxchg() racing against an unlock(), + * in which case we should observe @node->locked becoming + * true. + */ + if (smp_load_acquire(&node->locked)) + return true; + + cpu_relax(); + + /* + * Or we race against a concurrent unqueue()'s step-B, in which + * case its step-C will write us a new @node->prev pointer. + */ + prev = READ_ONCE(node->prev); + } + + /* + * Step - B -- stabilize @next + * + * Similar to unlock(), wait for @node->next or move @lock from @node + * back to @prev. + */ + + next = osq_wait_next(lock, node, prev); + if (!next) + return false; + + /* + * Step - C -- unlink + * + * @prev is stable because its still waiting for a new @prev->next + * pointer, @next is stable because our @node->next pointer is NULL and + * it will wait in Step-A. + */ + + WRITE_ONCE(next->prev, prev); + WRITE_ONCE(prev->next, next); + + return false; +} + +void osq_unlock(struct optimistic_spin_queue *lock) +{ + struct optimistic_spin_node *node, *next; + int curr = encode_cpu(smp_processor_id()); + + /* + * Fast path for the uncontended case. + */ + if (likely(atomic_cmpxchg_release(&lock->tail, curr, + OSQ_UNLOCKED_VAL) == curr)) + return; + + /* + * Second most likely case. + */ + node = this_cpu_ptr(&osq_node); + next = xchg(&node->next, NULL); + if (next) { + WRITE_ONCE(next->locked, 1); + return; + } + + next = osq_wait_next(lock, node, NULL); + if (next) + WRITE_ONCE(next->locked, 1); +} -- cgit v1.2.3