From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/sched/completion.c | 343 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 343 insertions(+) create mode 100644 kernel/sched/completion.c (limited to 'kernel/sched/completion.c') diff --git a/kernel/sched/completion.c b/kernel/sched/completion.c new file mode 100644 index 000000000..d57a5c1c1 --- /dev/null +++ b/kernel/sched/completion.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Generic wait-for-completion handler; + * + * It differs from semaphores in that their default case is the opposite, + * wait_for_completion default blocks whereas semaphore default non-block. The + * interface also makes it easy to 'complete' multiple waiting threads, + * something which isn't entirely natural for semaphores. + * + * But more importantly, the primitive documents the usage. Semaphores would + * typically be used for exclusion which gives rise to priority inversion. + * Waiting for completion is a typically sync point, but not an exclusion point. + */ + +/** + * complete: - signals a single thread waiting on this completion + * @x: holds the state of this particular completion + * + * This will wake up a single thread waiting on this completion. Threads will be + * awakened in the same order in which they were queued. + * + * See also complete_all(), wait_for_completion() and related routines. + * + * If this function wakes up a task, it executes a full memory barrier before + * accessing the task state. + */ +void complete(struct completion *x) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&x->wait.lock, flags); + + if (x->done != UINT_MAX) + x->done++; + swake_up_locked(&x->wait); + raw_spin_unlock_irqrestore(&x->wait.lock, flags); +} +EXPORT_SYMBOL(complete); + +/** + * complete_all: - signals all threads waiting on this completion + * @x: holds the state of this particular completion + * + * This will wake up all threads waiting on this particular completion event. + * + * If this function wakes up a task, it executes a full memory barrier before + * accessing the task state. + * + * Since complete_all() sets the completion of @x permanently to done + * to allow multiple waiters to finish, a call to reinit_completion() + * must be used on @x if @x is to be used again. The code must make + * sure that all waiters have woken and finished before reinitializing + * @x. Also note that the function completion_done() can not be used + * to know if there are still waiters after complete_all() has been called. + */ +void complete_all(struct completion *x) +{ + unsigned long flags; + + lockdep_assert_RT_in_threaded_ctx(); + + raw_spin_lock_irqsave(&x->wait.lock, flags); + x->done = UINT_MAX; + swake_up_all_locked(&x->wait); + raw_spin_unlock_irqrestore(&x->wait.lock, flags); +} +EXPORT_SYMBOL(complete_all); + +static inline long __sched +do_wait_for_common(struct completion *x, + long (*action)(long), long timeout, int state) +{ + if (!x->done) { + DECLARE_SWAITQUEUE(wait); + + do { + if (signal_pending_state(state, current)) { + timeout = -ERESTARTSYS; + break; + } + __prepare_to_swait(&x->wait, &wait); + __set_current_state(state); + raw_spin_unlock_irq(&x->wait.lock); + timeout = action(timeout); + raw_spin_lock_irq(&x->wait.lock); + } while (!x->done && timeout); + __finish_swait(&x->wait, &wait); + if (!x->done) + return timeout; + } + if (x->done != UINT_MAX) + x->done--; + return timeout ?: 1; +} + +static inline long __sched +__wait_for_common(struct completion *x, + long (*action)(long), long timeout, int state) +{ + might_sleep(); + + complete_acquire(x); + + raw_spin_lock_irq(&x->wait.lock); + timeout = do_wait_for_common(x, action, timeout, state); + raw_spin_unlock_irq(&x->wait.lock); + + complete_release(x); + + return timeout; +} + +static long __sched +wait_for_common(struct completion *x, long timeout, int state) +{ + return __wait_for_common(x, schedule_timeout, timeout, state); +} + +static long __sched +wait_for_common_io(struct completion *x, long timeout, int state) +{ + return __wait_for_common(x, io_schedule_timeout, timeout, state); +} + +/** + * wait_for_completion: - waits for completion of a task + * @x: holds the state of this particular completion + * + * This waits to be signaled for completion of a specific task. It is NOT + * interruptible and there is no timeout. + * + * See also similar routines (i.e. wait_for_completion_timeout()) with timeout + * and interrupt capability. Also see complete(). + */ +void __sched wait_for_completion(struct completion *x) +{ + wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE); +} +EXPORT_SYMBOL(wait_for_completion); + +/** + * wait_for_completion_timeout: - waits for completion of a task (w/timeout) + * @x: holds the state of this particular completion + * @timeout: timeout value in jiffies + * + * This waits for either a completion of a specific task to be signaled or for a + * specified timeout to expire. The timeout is in jiffies. It is not + * interruptible. + * + * Return: 0 if timed out, and positive (at least 1, or number of jiffies left + * till timeout) if completed. + */ +unsigned long __sched +wait_for_completion_timeout(struct completion *x, unsigned long timeout) +{ + return wait_for_common(x, timeout, TASK_UNINTERRUPTIBLE); +} +EXPORT_SYMBOL(wait_for_completion_timeout); + +/** + * wait_for_completion_io: - waits for completion of a task + * @x: holds the state of this particular completion + * + * This waits to be signaled for completion of a specific task. It is NOT + * interruptible and there is no timeout. The caller is accounted as waiting + * for IO (which traditionally means blkio only). + */ +void __sched wait_for_completion_io(struct completion *x) +{ + wait_for_common_io(x, MAX_SCHEDULE_TIMEOUT, TASK_UNINTERRUPTIBLE); +} +EXPORT_SYMBOL(wait_for_completion_io); + +/** + * wait_for_completion_io_timeout: - waits for completion of a task (w/timeout) + * @x: holds the state of this particular completion + * @timeout: timeout value in jiffies + * + * This waits for either a completion of a specific task to be signaled or for a + * specified timeout to expire. The timeout is in jiffies. It is not + * interruptible. The caller is accounted as waiting for IO (which traditionally + * means blkio only). + * + * Return: 0 if timed out, and positive (at least 1, or number of jiffies left + * till timeout) if completed. + */ +unsigned long __sched +wait_for_completion_io_timeout(struct completion *x, unsigned long timeout) +{ + return wait_for_common_io(x, timeout, TASK_UNINTERRUPTIBLE); +} +EXPORT_SYMBOL(wait_for_completion_io_timeout); + +/** + * wait_for_completion_interruptible: - waits for completion of a task (w/intr) + * @x: holds the state of this particular completion + * + * This waits for completion of a specific task to be signaled. It is + * interruptible. + * + * Return: -ERESTARTSYS if interrupted, 0 if completed. + */ +int __sched wait_for_completion_interruptible(struct completion *x) +{ + long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_INTERRUPTIBLE); + + if (t == -ERESTARTSYS) + return t; + return 0; +} +EXPORT_SYMBOL(wait_for_completion_interruptible); + +/** + * wait_for_completion_interruptible_timeout: - waits for completion (w/(to,intr)) + * @x: holds the state of this particular completion + * @timeout: timeout value in jiffies + * + * This waits for either a completion of a specific task to be signaled or for a + * specified timeout to expire. It is interruptible. The timeout is in jiffies. + * + * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1, + * or number of jiffies left till timeout) if completed. + */ +long __sched +wait_for_completion_interruptible_timeout(struct completion *x, + unsigned long timeout) +{ + return wait_for_common(x, timeout, TASK_INTERRUPTIBLE); +} +EXPORT_SYMBOL(wait_for_completion_interruptible_timeout); + +/** + * wait_for_completion_killable: - waits for completion of a task (killable) + * @x: holds the state of this particular completion + * + * This waits to be signaled for completion of a specific task. It can be + * interrupted by a kill signal. + * + * Return: -ERESTARTSYS if interrupted, 0 if completed. + */ +int __sched wait_for_completion_killable(struct completion *x) +{ + long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, TASK_KILLABLE); + + if (t == -ERESTARTSYS) + return t; + return 0; +} +EXPORT_SYMBOL(wait_for_completion_killable); + +int __sched wait_for_completion_state(struct completion *x, unsigned int state) +{ + long t = wait_for_common(x, MAX_SCHEDULE_TIMEOUT, state); + + if (t == -ERESTARTSYS) + return t; + return 0; +} +EXPORT_SYMBOL(wait_for_completion_state); + +/** + * wait_for_completion_killable_timeout: - waits for completion of a task (w/(to,killable)) + * @x: holds the state of this particular completion + * @timeout: timeout value in jiffies + * + * This waits for either a completion of a specific task to be + * signaled or for a specified timeout to expire. It can be + * interrupted by a kill signal. The timeout is in jiffies. + * + * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1, + * or number of jiffies left till timeout) if completed. + */ +long __sched +wait_for_completion_killable_timeout(struct completion *x, + unsigned long timeout) +{ + return wait_for_common(x, timeout, TASK_KILLABLE); +} +EXPORT_SYMBOL(wait_for_completion_killable_timeout); + +/** + * try_wait_for_completion - try to decrement a completion without blocking + * @x: completion structure + * + * Return: 0 if a decrement cannot be done without blocking + * 1 if a decrement succeeded. + * + * If a completion is being used as a counting completion, + * attempt to decrement the counter without blocking. This + * enables us to avoid waiting if the resource the completion + * is protecting is not available. + */ +bool try_wait_for_completion(struct completion *x) +{ + unsigned long flags; + bool ret = true; + + /* + * Since x->done will need to be locked only + * in the non-blocking case, we check x->done + * first without taking the lock so we can + * return early in the blocking case. + */ + if (!READ_ONCE(x->done)) + return false; + + raw_spin_lock_irqsave(&x->wait.lock, flags); + if (!x->done) + ret = false; + else if (x->done != UINT_MAX) + x->done--; + raw_spin_unlock_irqrestore(&x->wait.lock, flags); + return ret; +} +EXPORT_SYMBOL(try_wait_for_completion); + +/** + * completion_done - Test to see if a completion has any waiters + * @x: completion structure + * + * Return: 0 if there are waiters (wait_for_completion() in progress) + * 1 if there are no waiters. + * + * Note, this will always return true if complete_all() was called on @X. + */ +bool completion_done(struct completion *x) +{ + unsigned long flags; + + if (!READ_ONCE(x->done)) + return false; + + /* + * If ->done, we need to wait for complete() to release ->wait.lock + * otherwise we can end up freeing the completion before complete() + * is done referencing it. + */ + raw_spin_lock_irqsave(&x->wait.lock, flags); + raw_spin_unlock_irqrestore(&x->wait.lock, flags); + return true; +} +EXPORT_SYMBOL(completion_done); -- cgit v1.2.3