From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/smpboot.c | 490 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 490 insertions(+) create mode 100644 kernel/smpboot.c (limited to 'kernel/smpboot.c') diff --git a/kernel/smpboot.c b/kernel/smpboot.c new file mode 100644 index 000000000..2c7396da4 --- /dev/null +++ b/kernel/smpboot.c @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Common SMP CPU bringup/teardown functions + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "smpboot.h" + +#ifdef CONFIG_SMP + +#ifdef CONFIG_GENERIC_SMP_IDLE_THREAD +/* + * For the hotplug case we keep the task structs around and reuse + * them. + */ +static DEFINE_PER_CPU(struct task_struct *, idle_threads); + +struct task_struct *idle_thread_get(unsigned int cpu) +{ + struct task_struct *tsk = per_cpu(idle_threads, cpu); + + if (!tsk) + return ERR_PTR(-ENOMEM); + return tsk; +} + +void __init idle_thread_set_boot_cpu(void) +{ + per_cpu(idle_threads, smp_processor_id()) = current; +} + +/** + * idle_init - Initialize the idle thread for a cpu + * @cpu: The cpu for which the idle thread should be initialized + * + * Creates the thread if it does not exist. + */ +static __always_inline void idle_init(unsigned int cpu) +{ + struct task_struct *tsk = per_cpu(idle_threads, cpu); + + if (!tsk) { + tsk = fork_idle(cpu); + if (IS_ERR(tsk)) + pr_err("SMP: fork_idle() failed for CPU %u\n", cpu); + else + per_cpu(idle_threads, cpu) = tsk; + } +} + +/** + * idle_threads_init - Initialize idle threads for all cpus + */ +void __init idle_threads_init(void) +{ + unsigned int cpu, boot_cpu; + + boot_cpu = smp_processor_id(); + + for_each_possible_cpu(cpu) { + if (cpu != boot_cpu) + idle_init(cpu); + } +} +#endif + +#endif /* #ifdef CONFIG_SMP */ + +static LIST_HEAD(hotplug_threads); +static DEFINE_MUTEX(smpboot_threads_lock); + +struct smpboot_thread_data { + unsigned int cpu; + unsigned int status; + struct smp_hotplug_thread *ht; +}; + +enum { + HP_THREAD_NONE = 0, + HP_THREAD_ACTIVE, + HP_THREAD_PARKED, +}; + +/** + * smpboot_thread_fn - percpu hotplug thread loop function + * @data: thread data pointer + * + * Checks for thread stop and park conditions. Calls the necessary + * setup, cleanup, park and unpark functions for the registered + * thread. + * + * Returns 1 when the thread should exit, 0 otherwise. + */ +static int smpboot_thread_fn(void *data) +{ + struct smpboot_thread_data *td = data; + struct smp_hotplug_thread *ht = td->ht; + + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + preempt_disable(); + if (kthread_should_stop()) { + __set_current_state(TASK_RUNNING); + preempt_enable(); + /* cleanup must mirror setup */ + if (ht->cleanup && td->status != HP_THREAD_NONE) + ht->cleanup(td->cpu, cpu_online(td->cpu)); + kfree(td); + return 0; + } + + if (kthread_should_park()) { + __set_current_state(TASK_RUNNING); + preempt_enable(); + if (ht->park && td->status == HP_THREAD_ACTIVE) { + BUG_ON(td->cpu != smp_processor_id()); + ht->park(td->cpu); + td->status = HP_THREAD_PARKED; + } + kthread_parkme(); + /* We might have been woken for stop */ + continue; + } + + BUG_ON(td->cpu != smp_processor_id()); + + /* Check for state change setup */ + switch (td->status) { + case HP_THREAD_NONE: + __set_current_state(TASK_RUNNING); + preempt_enable(); + if (ht->setup) + ht->setup(td->cpu); + td->status = HP_THREAD_ACTIVE; + continue; + + case HP_THREAD_PARKED: + __set_current_state(TASK_RUNNING); + preempt_enable(); + if (ht->unpark) + ht->unpark(td->cpu); + td->status = HP_THREAD_ACTIVE; + continue; + } + + if (!ht->thread_should_run(td->cpu)) { + preempt_enable_no_resched(); + schedule(); + } else { + __set_current_state(TASK_RUNNING); + preempt_enable(); + ht->thread_fn(td->cpu); + } + } +} + +static int +__smpboot_create_thread(struct smp_hotplug_thread *ht, unsigned int cpu) +{ + struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu); + struct smpboot_thread_data *td; + + if (tsk) + return 0; + + td = kzalloc_node(sizeof(*td), GFP_KERNEL, cpu_to_node(cpu)); + if (!td) + return -ENOMEM; + td->cpu = cpu; + td->ht = ht; + + tsk = kthread_create_on_cpu(smpboot_thread_fn, td, cpu, + ht->thread_comm); + if (IS_ERR(tsk)) { + kfree(td); + return PTR_ERR(tsk); + } + kthread_set_per_cpu(tsk, cpu); + /* + * Park the thread so that it could start right on the CPU + * when it is available. + */ + kthread_park(tsk); + get_task_struct(tsk); + *per_cpu_ptr(ht->store, cpu) = tsk; + if (ht->create) { + /* + * Make sure that the task has actually scheduled out + * into park position, before calling the create + * callback. At least the migration thread callback + * requires that the task is off the runqueue. + */ + if (!wait_task_inactive(tsk, TASK_PARKED)) + WARN_ON(1); + else + ht->create(cpu); + } + return 0; +} + +int smpboot_create_threads(unsigned int cpu) +{ + struct smp_hotplug_thread *cur; + int ret = 0; + + mutex_lock(&smpboot_threads_lock); + list_for_each_entry(cur, &hotplug_threads, list) { + ret = __smpboot_create_thread(cur, cpu); + if (ret) + break; + } + mutex_unlock(&smpboot_threads_lock); + return ret; +} + +static void smpboot_unpark_thread(struct smp_hotplug_thread *ht, unsigned int cpu) +{ + struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu); + + if (!ht->selfparking) + kthread_unpark(tsk); +} + +int smpboot_unpark_threads(unsigned int cpu) +{ + struct smp_hotplug_thread *cur; + + mutex_lock(&smpboot_threads_lock); + list_for_each_entry(cur, &hotplug_threads, list) + smpboot_unpark_thread(cur, cpu); + mutex_unlock(&smpboot_threads_lock); + return 0; +} + +static void smpboot_park_thread(struct smp_hotplug_thread *ht, unsigned int cpu) +{ + struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu); + + if (tsk && !ht->selfparking) + kthread_park(tsk); +} + +int smpboot_park_threads(unsigned int cpu) +{ + struct smp_hotplug_thread *cur; + + mutex_lock(&smpboot_threads_lock); + list_for_each_entry_reverse(cur, &hotplug_threads, list) + smpboot_park_thread(cur, cpu); + mutex_unlock(&smpboot_threads_lock); + return 0; +} + +static void smpboot_destroy_threads(struct smp_hotplug_thread *ht) +{ + unsigned int cpu; + + /* We need to destroy also the parked threads of offline cpus */ + for_each_possible_cpu(cpu) { + struct task_struct *tsk = *per_cpu_ptr(ht->store, cpu); + + if (tsk) { + kthread_stop(tsk); + put_task_struct(tsk); + *per_cpu_ptr(ht->store, cpu) = NULL; + } + } +} + +/** + * smpboot_register_percpu_thread - Register a per_cpu thread related + * to hotplug + * @plug_thread: Hotplug thread descriptor + * + * Creates and starts the threads on all online cpus. + */ +int smpboot_register_percpu_thread(struct smp_hotplug_thread *plug_thread) +{ + unsigned int cpu; + int ret = 0; + + cpus_read_lock(); + mutex_lock(&smpboot_threads_lock); + for_each_online_cpu(cpu) { + ret = __smpboot_create_thread(plug_thread, cpu); + if (ret) { + smpboot_destroy_threads(plug_thread); + goto out; + } + smpboot_unpark_thread(plug_thread, cpu); + } + list_add(&plug_thread->list, &hotplug_threads); +out: + mutex_unlock(&smpboot_threads_lock); + cpus_read_unlock(); + return ret; +} +EXPORT_SYMBOL_GPL(smpboot_register_percpu_thread); + +/** + * smpboot_unregister_percpu_thread - Unregister a per_cpu thread related to hotplug + * @plug_thread: Hotplug thread descriptor + * + * Stops all threads on all possible cpus. + */ +void smpboot_unregister_percpu_thread(struct smp_hotplug_thread *plug_thread) +{ + cpus_read_lock(); + mutex_lock(&smpboot_threads_lock); + list_del(&plug_thread->list); + smpboot_destroy_threads(plug_thread); + mutex_unlock(&smpboot_threads_lock); + cpus_read_unlock(); +} +EXPORT_SYMBOL_GPL(smpboot_unregister_percpu_thread); + +static DEFINE_PER_CPU(atomic_t, cpu_hotplug_state) = ATOMIC_INIT(CPU_POST_DEAD); + +/* + * Called to poll specified CPU's state, for example, when waiting for + * a CPU to come online. + */ +int cpu_report_state(int cpu) +{ + return atomic_read(&per_cpu(cpu_hotplug_state, cpu)); +} + +/* + * If CPU has died properly, set its state to CPU_UP_PREPARE and + * return success. Otherwise, return -EBUSY if the CPU died after + * cpu_wait_death() timed out. And yet otherwise again, return -EAGAIN + * if cpu_wait_death() timed out and the CPU still hasn't gotten around + * to dying. In the latter two cases, the CPU might not be set up + * properly, but it is up to the arch-specific code to decide. + * Finally, -EIO indicates an unanticipated problem. + * + * Note that it is permissible to omit this call entirely, as is + * done in architectures that do no CPU-hotplug error checking. + */ +int cpu_check_up_prepare(int cpu) +{ + if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) { + atomic_set(&per_cpu(cpu_hotplug_state, cpu), CPU_UP_PREPARE); + return 0; + } + + switch (atomic_read(&per_cpu(cpu_hotplug_state, cpu))) { + + case CPU_POST_DEAD: + + /* The CPU died properly, so just start it up again. */ + atomic_set(&per_cpu(cpu_hotplug_state, cpu), CPU_UP_PREPARE); + return 0; + + case CPU_DEAD_FROZEN: + + /* + * Timeout during CPU death, so let caller know. + * The outgoing CPU completed its processing, but after + * cpu_wait_death() timed out and reported the error. The + * caller is free to proceed, in which case the state + * will be reset properly by cpu_set_state_online(). + * Proceeding despite this -EBUSY return makes sense + * for systems where the outgoing CPUs take themselves + * offline, with no post-death manipulation required from + * a surviving CPU. + */ + return -EBUSY; + + case CPU_BROKEN: + + /* + * The most likely reason we got here is that there was + * a timeout during CPU death, and the outgoing CPU never + * did complete its processing. This could happen on + * a virtualized system if the outgoing VCPU gets preempted + * for more than five seconds, and the user attempts to + * immediately online that same CPU. Trying again later + * might return -EBUSY above, hence -EAGAIN. + */ + return -EAGAIN; + + case CPU_UP_PREPARE: + /* + * Timeout while waiting for the CPU to show up. Allow to try + * again later. + */ + return 0; + + default: + + /* Should not happen. Famous last words. */ + return -EIO; + } +} + +/* + * Mark the specified CPU online. + * + * Note that it is permissible to omit this call entirely, as is + * done in architectures that do no CPU-hotplug error checking. + */ +void cpu_set_state_online(int cpu) +{ + (void)atomic_xchg(&per_cpu(cpu_hotplug_state, cpu), CPU_ONLINE); +} + +#ifdef CONFIG_HOTPLUG_CPU + +/* + * Wait for the specified CPU to exit the idle loop and die. + */ +bool cpu_wait_death(unsigned int cpu, int seconds) +{ + int jf_left = seconds * HZ; + int oldstate; + bool ret = true; + int sleep_jf = 1; + + might_sleep(); + + /* The outgoing CPU will normally get done quite quickly. */ + if (atomic_read(&per_cpu(cpu_hotplug_state, cpu)) == CPU_DEAD) + goto update_state_early; + udelay(5); + + /* But if the outgoing CPU dawdles, wait increasingly long times. */ + while (atomic_read(&per_cpu(cpu_hotplug_state, cpu)) != CPU_DEAD) { + schedule_timeout_uninterruptible(sleep_jf); + jf_left -= sleep_jf; + if (jf_left <= 0) + break; + sleep_jf = DIV_ROUND_UP(sleep_jf * 11, 10); + } +update_state_early: + oldstate = atomic_read(&per_cpu(cpu_hotplug_state, cpu)); +update_state: + if (oldstate == CPU_DEAD) { + /* Outgoing CPU died normally, update state. */ + smp_mb(); /* atomic_read() before update. */ + atomic_set(&per_cpu(cpu_hotplug_state, cpu), CPU_POST_DEAD); + } else { + /* Outgoing CPU still hasn't died, set state accordingly. */ + if (!atomic_try_cmpxchg(&per_cpu(cpu_hotplug_state, cpu), + &oldstate, CPU_BROKEN)) + goto update_state; + ret = false; + } + return ret; +} + +/* + * Called by the outgoing CPU to report its successful death. Return + * false if this report follows the surviving CPU's timing out. + * + * A separate "CPU_DEAD_FROZEN" is used when the surviving CPU + * timed out. This approach allows architectures to omit calls to + * cpu_check_up_prepare() and cpu_set_state_online() without defeating + * the next cpu_wait_death()'s polling loop. + */ +bool cpu_report_death(void) +{ + int oldstate; + int newstate; + int cpu = smp_processor_id(); + + oldstate = atomic_read(&per_cpu(cpu_hotplug_state, cpu)); + do { + if (oldstate != CPU_BROKEN) + newstate = CPU_DEAD; + else + newstate = CPU_DEAD_FROZEN; + } while (!atomic_try_cmpxchg(&per_cpu(cpu_hotplug_state, cpu), + &oldstate, newstate)); + return newstate == CPU_DEAD; +} + +#endif /* #ifdef CONFIG_HOTPLUG_CPU */ -- cgit v1.2.3