From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/time/timeconv.c | 141 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+) create mode 100644 kernel/time/timeconv.c (limited to 'kernel/time/timeconv.c') diff --git a/kernel/time/timeconv.c b/kernel/time/timeconv.c new file mode 100644 index 000000000..59b922c82 --- /dev/null +++ b/kernel/time/timeconv.c @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: LGPL-2.0+ +/* + * Copyright (C) 1993, 1994, 1995, 1996, 1997 Free Software Foundation, Inc. + * This file is part of the GNU C Library. + * Contributed by Paul Eggert (eggert@twinsun.com). + * + * The GNU C Library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Library General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * The GNU C Library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Library General Public License for more details. + * + * You should have received a copy of the GNU Library General Public + * License along with the GNU C Library; see the file COPYING.LIB. If not, + * write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 02111-1307, USA. + */ + +/* + * Converts the calendar time to broken-down time representation + * + * 2009-7-14: + * Moved from glibc-2.6 to kernel by Zhaolei + * 2021-06-02: + * Reimplemented by Cassio Neri + */ + +#include +#include +#include + +#define SECS_PER_HOUR (60 * 60) +#define SECS_PER_DAY (SECS_PER_HOUR * 24) + +/** + * time64_to_tm - converts the calendar time to local broken-down time + * + * @totalsecs: the number of seconds elapsed since 00:00:00 on January 1, 1970, + * Coordinated Universal Time (UTC). + * @offset: offset seconds adding to totalsecs. + * @result: pointer to struct tm variable to receive broken-down time + */ +void time64_to_tm(time64_t totalsecs, int offset, struct tm *result) +{ + u32 u32tmp, day_of_century, year_of_century, day_of_year, month, day; + u64 u64tmp, udays, century, year; + bool is_Jan_or_Feb, is_leap_year; + long days, rem; + int remainder; + + days = div_s64_rem(totalsecs, SECS_PER_DAY, &remainder); + rem = remainder; + rem += offset; + while (rem < 0) { + rem += SECS_PER_DAY; + --days; + } + while (rem >= SECS_PER_DAY) { + rem -= SECS_PER_DAY; + ++days; + } + + result->tm_hour = rem / SECS_PER_HOUR; + rem %= SECS_PER_HOUR; + result->tm_min = rem / 60; + result->tm_sec = rem % 60; + + /* January 1, 1970 was a Thursday. */ + result->tm_wday = (4 + days) % 7; + if (result->tm_wday < 0) + result->tm_wday += 7; + + /* + * The following algorithm is, basically, Proposition 6.3 of Neri + * and Schneider [1]. In a few words: it works on the computational + * (fictitious) calendar where the year starts in March, month = 2 + * (*), and finishes in February, month = 13. This calendar is + * mathematically convenient because the day of the year does not + * depend on whether the year is leap or not. For instance: + * + * March 1st 0-th day of the year; + * ... + * April 1st 31-st day of the year; + * ... + * January 1st 306-th day of the year; (Important!) + * ... + * February 28th 364-th day of the year; + * February 29th 365-th day of the year (if it exists). + * + * After having worked out the date in the computational calendar + * (using just arithmetics) it's easy to convert it to the + * corresponding date in the Gregorian calendar. + * + * [1] "Euclidean Affine Functions and Applications to Calendar + * Algorithms". https://arxiv.org/abs/2102.06959 + * + * (*) The numbering of months follows tm more closely and thus, + * is slightly different from [1]. + */ + + udays = ((u64) days) + 2305843009213814918ULL; + + u64tmp = 4 * udays + 3; + century = div64_u64_rem(u64tmp, 146097, &u64tmp); + day_of_century = (u32) (u64tmp / 4); + + u32tmp = 4 * day_of_century + 3; + u64tmp = 2939745ULL * u32tmp; + year_of_century = upper_32_bits(u64tmp); + day_of_year = lower_32_bits(u64tmp) / 2939745 / 4; + + year = 100 * century + year_of_century; + is_leap_year = year_of_century ? !(year_of_century % 4) : !(century % 4); + + u32tmp = 2141 * day_of_year + 132377; + month = u32tmp >> 16; + day = ((u16) u32tmp) / 2141; + + /* + * Recall that January 1st is the 306-th day of the year in the + * computational (not Gregorian) calendar. + */ + is_Jan_or_Feb = day_of_year >= 306; + + /* Convert to the Gregorian calendar and adjust to Unix time. */ + year = year + is_Jan_or_Feb - 6313183731940000ULL; + month = is_Jan_or_Feb ? month - 12 : month; + day = day + 1; + day_of_year += is_Jan_or_Feb ? -306 : 31 + 28 + is_leap_year; + + /* Convert to tm's format. */ + result->tm_year = (long) (year - 1900); + result->tm_mon = (int) month; + result->tm_mday = (int) day; + result->tm_yday = (int) day_of_year; +} +EXPORT_SYMBOL(time64_to_tm); -- cgit v1.2.3