From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- kernel/trace/trace_dynevent.c | 483 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 483 insertions(+) create mode 100644 kernel/trace/trace_dynevent.c (limited to 'kernel/trace/trace_dynevent.c') diff --git a/kernel/trace/trace_dynevent.c b/kernel/trace/trace_dynevent.c new file mode 100644 index 000000000..4376887e0 --- /dev/null +++ b/kernel/trace/trace_dynevent.c @@ -0,0 +1,483 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Generic dynamic event control interface + * + * Copyright (C) 2018 Masami Hiramatsu + */ + +#include +#include +#include +#include +#include +#include + +#include "trace.h" +#include "trace_output.h" /* for trace_event_sem */ +#include "trace_dynevent.h" + +static DEFINE_MUTEX(dyn_event_ops_mutex); +static LIST_HEAD(dyn_event_ops_list); + +bool trace_event_dyn_try_get_ref(struct trace_event_call *dyn_call) +{ + struct trace_event_call *call; + bool ret = false; + + if (WARN_ON_ONCE(!(dyn_call->flags & TRACE_EVENT_FL_DYNAMIC))) + return false; + + down_read(&trace_event_sem); + list_for_each_entry(call, &ftrace_events, list) { + if (call == dyn_call) { + atomic_inc(&dyn_call->refcnt); + ret = true; + } + } + up_read(&trace_event_sem); + return ret; +} + +void trace_event_dyn_put_ref(struct trace_event_call *call) +{ + if (WARN_ON_ONCE(!(call->flags & TRACE_EVENT_FL_DYNAMIC))) + return; + + if (WARN_ON_ONCE(atomic_read(&call->refcnt) <= 0)) { + atomic_set(&call->refcnt, 0); + return; + } + + atomic_dec(&call->refcnt); +} + +bool trace_event_dyn_busy(struct trace_event_call *call) +{ + return atomic_read(&call->refcnt) != 0; +} + +int dyn_event_register(struct dyn_event_operations *ops) +{ + if (!ops || !ops->create || !ops->show || !ops->is_busy || + !ops->free || !ops->match) + return -EINVAL; + + INIT_LIST_HEAD(&ops->list); + mutex_lock(&dyn_event_ops_mutex); + list_add_tail(&ops->list, &dyn_event_ops_list); + mutex_unlock(&dyn_event_ops_mutex); + return 0; +} + +int dyn_event_release(const char *raw_command, struct dyn_event_operations *type) +{ + struct dyn_event *pos, *n; + char *system = NULL, *event, *p; + int argc, ret = -ENOENT; + char **argv; + + argv = argv_split(GFP_KERNEL, raw_command, &argc); + if (!argv) + return -ENOMEM; + + if (argv[0][0] == '-') { + if (argv[0][1] != ':') { + ret = -EINVAL; + goto out; + } + event = &argv[0][2]; + } else { + event = strchr(argv[0], ':'); + if (!event) { + ret = -EINVAL; + goto out; + } + event++; + } + + p = strchr(event, '/'); + if (p) { + system = event; + event = p + 1; + *p = '\0'; + } + if (!system && event[0] == '\0') { + ret = -EINVAL; + goto out; + } + + mutex_lock(&event_mutex); + for_each_dyn_event_safe(pos, n) { + if (type && type != pos->ops) + continue; + if (!pos->ops->match(system, event, + argc - 1, (const char **)argv + 1, pos)) + continue; + + ret = pos->ops->free(pos); + if (ret) + break; + } + tracing_reset_all_online_cpus(); + mutex_unlock(&event_mutex); +out: + argv_free(argv); + return ret; +} + +static int create_dyn_event(const char *raw_command) +{ + struct dyn_event_operations *ops; + int ret = -ENODEV; + + if (raw_command[0] == '-' || raw_command[0] == '!') + return dyn_event_release(raw_command, NULL); + + mutex_lock(&dyn_event_ops_mutex); + list_for_each_entry(ops, &dyn_event_ops_list, list) { + ret = ops->create(raw_command); + if (!ret || ret != -ECANCELED) + break; + } + mutex_unlock(&dyn_event_ops_mutex); + if (ret == -ECANCELED) + ret = -EINVAL; + + return ret; +} + +/* Protected by event_mutex */ +LIST_HEAD(dyn_event_list); + +void *dyn_event_seq_start(struct seq_file *m, loff_t *pos) +{ + mutex_lock(&event_mutex); + return seq_list_start(&dyn_event_list, *pos); +} + +void *dyn_event_seq_next(struct seq_file *m, void *v, loff_t *pos) +{ + return seq_list_next(v, &dyn_event_list, pos); +} + +void dyn_event_seq_stop(struct seq_file *m, void *v) +{ + mutex_unlock(&event_mutex); +} + +static int dyn_event_seq_show(struct seq_file *m, void *v) +{ + struct dyn_event *ev = v; + + if (ev && ev->ops) + return ev->ops->show(m, ev); + + return 0; +} + +static const struct seq_operations dyn_event_seq_op = { + .start = dyn_event_seq_start, + .next = dyn_event_seq_next, + .stop = dyn_event_seq_stop, + .show = dyn_event_seq_show +}; + +/* + * dyn_events_release_all - Release all specific events + * @type: the dyn_event_operations * which filters releasing events + * + * This releases all events which ->ops matches @type. If @type is NULL, + * all events are released. + * Return -EBUSY if any of them are in use, and return other errors when + * it failed to free the given event. Except for -EBUSY, event releasing + * process will be aborted at that point and there may be some other + * releasable events on the list. + */ +int dyn_events_release_all(struct dyn_event_operations *type) +{ + struct dyn_event *ev, *tmp; + int ret = 0; + + mutex_lock(&event_mutex); + for_each_dyn_event(ev) { + if (type && ev->ops != type) + continue; + if (ev->ops->is_busy(ev)) { + ret = -EBUSY; + goto out; + } + } + for_each_dyn_event_safe(ev, tmp) { + if (type && ev->ops != type) + continue; + ret = ev->ops->free(ev); + if (ret) + break; + } +out: + tracing_reset_all_online_cpus(); + mutex_unlock(&event_mutex); + + return ret; +} + +static int dyn_event_open(struct inode *inode, struct file *file) +{ + int ret; + + ret = tracing_check_open_get_tr(NULL); + if (ret) + return ret; + + if ((file->f_mode & FMODE_WRITE) && (file->f_flags & O_TRUNC)) { + ret = dyn_events_release_all(NULL); + if (ret < 0) + return ret; + } + + return seq_open(file, &dyn_event_seq_op); +} + +static ssize_t dyn_event_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + return trace_parse_run_command(file, buffer, count, ppos, + create_dyn_event); +} + +static const struct file_operations dynamic_events_ops = { + .owner = THIS_MODULE, + .open = dyn_event_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, + .write = dyn_event_write, +}; + +/* Make a tracefs interface for controlling dynamic events */ +static __init int init_dynamic_event(void) +{ + int ret; + + ret = tracing_init_dentry(); + if (ret) + return 0; + + trace_create_file("dynamic_events", TRACE_MODE_WRITE, NULL, + NULL, &dynamic_events_ops); + + return 0; +} +fs_initcall(init_dynamic_event); + +/** + * dynevent_arg_add - Add an arg to a dynevent_cmd + * @cmd: A pointer to the dynevent_cmd struct representing the new event cmd + * @arg: The argument to append to the current cmd + * @check_arg: An (optional) pointer to a function checking arg sanity + * + * Append an argument to a dynevent_cmd. The argument string will be + * appended to the current cmd string, followed by a separator, if + * applicable. Before the argument is added, the @check_arg function, + * if present, will be used to check the sanity of the current arg + * string. + * + * The cmd string and separator should be set using the + * dynevent_arg_init() before any arguments are added using this + * function. + * + * Return: 0 if successful, error otherwise. + */ +int dynevent_arg_add(struct dynevent_cmd *cmd, + struct dynevent_arg *arg, + dynevent_check_arg_fn_t check_arg) +{ + int ret = 0; + + if (check_arg) { + ret = check_arg(arg); + if (ret) + return ret; + } + + ret = seq_buf_printf(&cmd->seq, " %s%c", arg->str, arg->separator); + if (ret) { + pr_err("String is too long: %s%c\n", arg->str, arg->separator); + return -E2BIG; + } + + return ret; +} + +/** + * dynevent_arg_pair_add - Add an arg pair to a dynevent_cmd + * @cmd: A pointer to the dynevent_cmd struct representing the new event cmd + * @arg_pair: The argument pair to append to the current cmd + * @check_arg: An (optional) pointer to a function checking arg sanity + * + * Append an argument pair to a dynevent_cmd. An argument pair + * consists of a left-hand-side argument and a right-hand-side + * argument separated by an operator, which can be whitespace, all + * followed by a separator, if applicable. This can be used to add + * arguments of the form 'type variable_name;' or 'x+y'. + * + * The lhs argument string will be appended to the current cmd string, + * followed by an operator, if applicable, followed by the rhs string, + * followed finally by a separator, if applicable. Before the + * argument is added, the @check_arg function, if present, will be + * used to check the sanity of the current arg strings. + * + * The cmd strings, operator, and separator should be set using the + * dynevent_arg_pair_init() before any arguments are added using this + * function. + * + * Return: 0 if successful, error otherwise. + */ +int dynevent_arg_pair_add(struct dynevent_cmd *cmd, + struct dynevent_arg_pair *arg_pair, + dynevent_check_arg_fn_t check_arg) +{ + int ret = 0; + + if (check_arg) { + ret = check_arg(arg_pair); + if (ret) + return ret; + } + + ret = seq_buf_printf(&cmd->seq, " %s%c%s%c", arg_pair->lhs, + arg_pair->operator, arg_pair->rhs, + arg_pair->separator); + if (ret) { + pr_err("field string is too long: %s%c%s%c\n", arg_pair->lhs, + arg_pair->operator, arg_pair->rhs, + arg_pair->separator); + return -E2BIG; + } + + return ret; +} + +/** + * dynevent_str_add - Add a string to a dynevent_cmd + * @cmd: A pointer to the dynevent_cmd struct representing the new event cmd + * @str: The string to append to the current cmd + * + * Append a string to a dynevent_cmd. The string will be appended to + * the current cmd string as-is, with nothing prepended or appended. + * + * Return: 0 if successful, error otherwise. + */ +int dynevent_str_add(struct dynevent_cmd *cmd, const char *str) +{ + int ret = 0; + + ret = seq_buf_puts(&cmd->seq, str); + if (ret) { + pr_err("String is too long: %s\n", str); + return -E2BIG; + } + + return ret; +} + +/** + * dynevent_cmd_init - Initialize a dynevent_cmd object + * @cmd: A pointer to the dynevent_cmd struct representing the cmd + * @buf: A pointer to the buffer to generate the command into + * @maxlen: The length of the buffer the command will be generated into + * @type: The type of the cmd, checked against further operations + * @run_command: The type-specific function that will actually run the command + * + * Initialize a dynevent_cmd. A dynevent_cmd is used to build up and + * run dynamic event creation commands, such as commands for creating + * synthetic and kprobe events. Before calling any of the functions + * used to build the command, a dynevent_cmd object should be + * instantiated and initialized using this function. + * + * The initialization sets things up by saving a pointer to the + * user-supplied buffer and its length via the @buf and @maxlen + * params, and by saving the cmd-specific @type and @run_command + * params which are used to check subsequent dynevent_cmd operations + * and actually run the command when complete. + */ +void dynevent_cmd_init(struct dynevent_cmd *cmd, char *buf, int maxlen, + enum dynevent_type type, + dynevent_create_fn_t run_command) +{ + memset(cmd, '\0', sizeof(*cmd)); + + seq_buf_init(&cmd->seq, buf, maxlen); + cmd->type = type; + cmd->run_command = run_command; +} + +/** + * dynevent_arg_init - Initialize a dynevent_arg object + * @arg: A pointer to the dynevent_arg struct representing the arg + * @separator: An (optional) separator, appended after adding the arg + * + * Initialize a dynevent_arg object. A dynevent_arg represents an + * object used to append single arguments to the current command + * string. After the arg string is successfully appended to the + * command string, the optional @separator is appended. If no + * separator was specified when initializing the arg, a space will be + * appended. + */ +void dynevent_arg_init(struct dynevent_arg *arg, + char separator) +{ + memset(arg, '\0', sizeof(*arg)); + + if (!separator) + separator = ' '; + arg->separator = separator; +} + +/** + * dynevent_arg_pair_init - Initialize a dynevent_arg_pair object + * @arg_pair: A pointer to the dynevent_arg_pair struct representing the arg + * @operator: An (optional) operator, appended after adding the first arg + * @separator: An (optional) separator, appended after adding the second arg + * + * Initialize a dynevent_arg_pair object. A dynevent_arg_pair + * represents an object used to append argument pairs such as 'type + * variable_name;' or 'x+y' to the current command string. An + * argument pair consists of a left-hand-side argument and a + * right-hand-side argument separated by an operator, which can be + * whitespace, all followed by a separator, if applicable. After the + * first arg string is successfully appended to the command string, + * the optional @operator is appended, followed by the second arg and + * optional @separator. If no separator was specified when + * initializing the arg, a space will be appended. + */ +void dynevent_arg_pair_init(struct dynevent_arg_pair *arg_pair, + char operator, char separator) +{ + memset(arg_pair, '\0', sizeof(*arg_pair)); + + if (!operator) + operator = ' '; + arg_pair->operator = operator; + + if (!separator) + separator = ' '; + arg_pair->separator = separator; +} + +/** + * dynevent_create - Create the dynamic event contained in dynevent_cmd + * @cmd: The dynevent_cmd object containing the dynamic event creation command + * + * Once a dynevent_cmd object has been successfully built up via the + * dynevent_cmd_init(), dynevent_arg_add() and dynevent_arg_pair_add() + * functions, this function runs the final command to actually create + * the event. + * + * Return: 0 if the event was successfully created, error otherwise. + */ +int dynevent_create(struct dynevent_cmd *cmd) +{ + return cmd->run_command(cmd); +} +EXPORT_SYMBOL_GPL(dynevent_create); -- cgit v1.2.3