From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/Kconfig.ubsan | 150 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 150 insertions(+) create mode 100644 lib/Kconfig.ubsan (limited to 'lib/Kconfig.ubsan') diff --git a/lib/Kconfig.ubsan b/lib/Kconfig.ubsan new file mode 100644 index 000000000..fd15230a7 --- /dev/null +++ b/lib/Kconfig.ubsan @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: GPL-2.0-only +config ARCH_HAS_UBSAN_SANITIZE_ALL + bool + +menuconfig UBSAN + bool "Undefined behaviour sanity checker" + help + This option enables the Undefined Behaviour sanity checker. + Compile-time instrumentation is used to detect various undefined + behaviours at runtime. For more details, see: + Documentation/dev-tools/ubsan.rst + +if UBSAN + +config UBSAN_TRAP + bool "On Sanitizer warnings, abort the running kernel code" + depends on !COMPILE_TEST + depends on $(cc-option, -fsanitize-undefined-trap-on-error) + help + Building kernels with Sanitizer features enabled tends to grow + the kernel size by around 5%, due to adding all the debugging + text on failure paths. To avoid this, Sanitizer instrumentation + can just issue a trap. This reduces the kernel size overhead but + turns all warnings (including potentially harmless conditions) + into full exceptions that abort the running kernel code + (regardless of context, locks held, etc), which may destabilize + the system. For some system builders this is an acceptable + trade-off. + +config CC_HAS_UBSAN_BOUNDS + def_bool $(cc-option,-fsanitize=bounds) + +config CC_HAS_UBSAN_ARRAY_BOUNDS + def_bool $(cc-option,-fsanitize=array-bounds) + +config UBSAN_BOUNDS + bool "Perform array index bounds checking" + default UBSAN + depends on CC_HAS_UBSAN_ARRAY_BOUNDS || CC_HAS_UBSAN_BOUNDS + help + This option enables detection of directly indexed out of bounds + array accesses, where the array size is known at compile time. + Note that this does not protect array overflows via bad calls + to the {str,mem}*cpy() family of functions (that is addressed + by CONFIG_FORTIFY_SOURCE). + +config UBSAN_ONLY_BOUNDS + def_bool CC_HAS_UBSAN_BOUNDS && !CC_HAS_UBSAN_ARRAY_BOUNDS + depends on UBSAN_BOUNDS + help + This is a weird case: Clang's -fsanitize=bounds includes + -fsanitize=local-bounds, but it's trapping-only, so for + Clang, we must use -fsanitize=array-bounds when we want + traditional array bounds checking enabled. For GCC, we + want -fsanitize=bounds. + +config UBSAN_ARRAY_BOUNDS + def_bool CC_HAS_UBSAN_ARRAY_BOUNDS + depends on UBSAN_BOUNDS + +config UBSAN_LOCAL_BOUNDS + bool "Perform array local bounds checking" + depends on UBSAN_TRAP + depends on $(cc-option,-fsanitize=local-bounds) + help + This option enables -fsanitize=local-bounds which traps when an + exception/error is detected. Therefore, it may only be enabled + with CONFIG_UBSAN_TRAP. + + Enabling this option detects errors due to accesses through a + pointer that is derived from an object of a statically-known size, + where an added offset (which may not be known statically) is + out-of-bounds. + +config UBSAN_SHIFT + bool "Perform checking for bit-shift overflows" + default UBSAN + depends on $(cc-option,-fsanitize=shift) + help + This option enables -fsanitize=shift which checks for bit-shift + operations that overflow to the left or go switch to negative + for signed types. + +config UBSAN_DIV_ZERO + bool "Perform checking for integer divide-by-zero" + depends on $(cc-option,-fsanitize=integer-divide-by-zero) + # https://github.com/ClangBuiltLinux/linux/issues/1657 + # https://github.com/llvm/llvm-project/issues/56289 + depends on !CC_IS_CLANG + help + This option enables -fsanitize=integer-divide-by-zero which checks + for integer division by zero. This is effectively redundant with the + kernel's existing exception handling, though it can provide greater + debugging information under CONFIG_UBSAN_REPORT_FULL. + +config UBSAN_UNREACHABLE + bool "Perform checking for unreachable code" + # objtool already handles unreachable checking and gets angry about + # seeing UBSan instrumentation located in unreachable places. + depends on !(OBJTOOL && (STACK_VALIDATION || UNWINDER_ORC || HAVE_UACCESS_VALIDATION)) + depends on $(cc-option,-fsanitize=unreachable) + help + This option enables -fsanitize=unreachable which checks for control + flow reaching an expected-to-be-unreachable position. + +config UBSAN_BOOL + bool "Perform checking for non-boolean values used as boolean" + default UBSAN + depends on $(cc-option,-fsanitize=bool) + help + This option enables -fsanitize=bool which checks for boolean values being + loaded that are neither 0 nor 1. + +config UBSAN_ENUM + bool "Perform checking for out of bounds enum values" + default UBSAN + depends on $(cc-option,-fsanitize=enum) + help + This option enables -fsanitize=enum which checks for values being loaded + into an enum that are outside the range of given values for the given enum. + +config UBSAN_ALIGNMENT + bool "Perform checking for misaligned pointer usage" + default !HAVE_EFFICIENT_UNALIGNED_ACCESS + depends on !UBSAN_TRAP && !COMPILE_TEST + depends on $(cc-option,-fsanitize=alignment) + help + This option enables the check of unaligned memory accesses. + Enabling this option on architectures that support unaligned + accesses may produce a lot of false positives. + +config UBSAN_SANITIZE_ALL + bool "Enable instrumentation for the entire kernel" + depends on ARCH_HAS_UBSAN_SANITIZE_ALL + default y + help + This option activates instrumentation for the entire kernel. + If you don't enable this option, you have to explicitly specify + UBSAN_SANITIZE := y for the files/directories you want to check for UB. + Enabling this option will get kernel image size increased + significantly. + +config TEST_UBSAN + tristate "Module for testing for undefined behavior detection" + depends on m + help + This is a test module for UBSAN. + It triggers various undefined behavior, and detect it. + +endif # if UBSAN -- cgit v1.2.3