From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/build_OID_registry | 203 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100755 lib/build_OID_registry (limited to 'lib/build_OID_registry') diff --git a/lib/build_OID_registry b/lib/build_OID_registry new file mode 100755 index 000000000..d7fc32ea8 --- /dev/null +++ b/lib/build_OID_registry @@ -0,0 +1,203 @@ +#!/usr/bin/perl -w +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Build a static ASN.1 Object Identified (OID) registry +# +# Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. +# Written by David Howells (dhowells@redhat.com) +# + +use strict; + +my @names = (); +my @oids = (); + +if ($#ARGV != 1) { + print STDERR "Format: ", $0, " \n"; + exit(2); +} + +# +# Open the file to read from +# +open IN_FILE, "<$ARGV[0]" || die; +while () { + chomp; + if (m!\s+OID_([a-zA-z][a-zA-Z0-9_]+),\s+/[*]\s+([012][.0-9]*)\s+[*]/!) { + push @names, $1; + push @oids, $2; + } +} +close IN_FILE || die; + +# +# Open the files to write into +# +open C_FILE, ">$ARGV[1]" or die; +print C_FILE "/*\n"; +print C_FILE " * Automatically generated by ", $0, ". Do not edit\n"; +print C_FILE " */\n"; + +# +# Split the data up into separate lists and also determine the lengths of the +# encoded data arrays. +# +my @indices = (); +my @lengths = (); +my $total_length = 0; + +for (my $i = 0; $i <= $#names; $i++) { + my $name = $names[$i]; + my $oid = $oids[$i]; + + my @components = split(/[.]/, $oid); + + # Determine the encoded length of this OID + my $size = $#components; + for (my $loop = 2; $loop <= $#components; $loop++) { + my $c = $components[$loop]; + + # We will base128 encode the number + my $tmp = ($c == 0) ? 0 : int(log($c)/log(2)); + $tmp = int($tmp / 7); + $size += $tmp; + } + push @lengths, $size; + push @indices, $total_length; + $total_length += $size; +} + +# +# Emit the look-up-by-OID index table +# +print C_FILE "\n"; +if ($total_length <= 255) { + print C_FILE "static const unsigned char oid_index[OID__NR + 1] = {\n"; +} else { + print C_FILE "static const unsigned short oid_index[OID__NR + 1] = {\n"; +} +for (my $i = 0; $i <= $#names; $i++) { + print C_FILE "\t[OID_", $names[$i], "] = ", $indices[$i], ",\n" +} +print C_FILE "\t[OID__NR] = ", $total_length, "\n"; +print C_FILE "};\n"; + +# +# Encode the OIDs +# +my @encoded_oids = (); + +for (my $i = 0; $i <= $#names; $i++) { + my @octets = (); + + my @components = split(/[.]/, $oids[$i]); + + push @octets, $components[0] * 40 + $components[1]; + + for (my $loop = 2; $loop <= $#components; $loop++) { + my $c = $components[$loop]; + + # Base128 encode the number + my $tmp = ($c == 0) ? 0 : int(log($c)/log(2)); + $tmp = int($tmp / 7); + + for (; $tmp > 0; $tmp--) { + push @octets, (($c >> $tmp * 7) & 0x7f) | 0x80; + } + push @octets, $c & 0x7f; + } + + push @encoded_oids, \@octets; +} + +# +# Create a hash value for each OID +# +my @hash_values = (); +for (my $i = 0; $i <= $#names; $i++) { + my @octets = @{$encoded_oids[$i]}; + + my $hash = $#octets; + foreach (@octets) { + $hash += $_ * 33; + } + + $hash = ($hash >> 24) ^ ($hash >> 16) ^ ($hash >> 8) ^ ($hash); + + push @hash_values, $hash & 0xff; +} + +# +# Emit the OID data +# +print C_FILE "\n"; +print C_FILE "static const unsigned char oid_data[", $total_length, "] = {\n"; +for (my $i = 0; $i <= $#names; $i++) { + my @octets = @{$encoded_oids[$i]}; + print C_FILE "\t"; + print C_FILE $_, ", " foreach (@octets); + print C_FILE "\t// ", $names[$i]; + print C_FILE "\n"; +} +print C_FILE "};\n"; + +# +# Build the search index table (ordered by length then hash then content) +# +my @index_table = ( 0 .. $#names ); + +@index_table = sort { + my @octets_a = @{$encoded_oids[$a]}; + my @octets_b = @{$encoded_oids[$b]}; + + return $hash_values[$a] <=> $hash_values[$b] + if ($hash_values[$a] != $hash_values[$b]); + return $#octets_a <=> $#octets_b + if ($#octets_a != $#octets_b); + for (my $i = $#octets_a; $i >= 0; $i--) { + return $octets_a[$i] <=> $octets_b[$i] + if ($octets_a[$i] != $octets_b[$i]); + } + return 0; + +} @index_table; + +# +# Emit the search index and hash value table +# +print C_FILE "\n"; +print C_FILE "static const struct {\n"; +print C_FILE "\tunsigned char hash;\n"; +if ($#names <= 255) { + print C_FILE "\tenum OID oid : 8;\n"; +} else { + print C_FILE "\tenum OID oid : 16;\n"; +} +print C_FILE "} oid_search_table[OID__NR] = {\n"; +for (my $i = 0; $i <= $#names; $i++) { + my @octets = @{$encoded_oids[$index_table[$i]]}; + printf(C_FILE "\t[%3u] = { %3u, OID_%-35s }, // ", + $i, + $hash_values[$index_table[$i]], + $names[$index_table[$i]]); + printf C_FILE "%02x", $_ foreach (@octets); + print C_FILE "\n"; +} +print C_FILE "};\n"; + +# +# Emit the OID debugging name table +# +#print C_FILE "\n"; +#print C_FILE "const char *const oid_name_table[OID__NR + 1] = {\n"; +# +#for (my $i = 0; $i <= $#names; $i++) { +# print C_FILE "\t\"", $names[$i], "\",\n" +#} +#print C_FILE "\t\"Unknown-OID\"\n"; +#print C_FILE "};\n"; + +# +# Polish off +# +close C_FILE or die; -- cgit v1.2.3