From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/decompress_unlzo.c | 286 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 286 insertions(+) create mode 100644 lib/decompress_unlzo.c (limited to 'lib/decompress_unlzo.c') diff --git a/lib/decompress_unlzo.c b/lib/decompress_unlzo.c new file mode 100644 index 000000000..64c135850 --- /dev/null +++ b/lib/decompress_unlzo.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * LZO decompressor for the Linux kernel. Code borrowed from the lzo + * implementation by Markus Franz Xaver Johannes Oberhumer. + * + * Linux kernel adaptation: + * Copyright (C) 2009 + * Albin Tonnerre, Free Electrons + * + * Original code: + * Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer + * All Rights Reserved. + * + * Markus F.X.J. Oberhumer + * + * http://www.oberhumer.com/opensource/lzop/ + */ + +#ifdef STATIC +#define PREBOOT +#include "lzo/lzo1x_decompress_safe.c" +#else +#include +#endif + +#include +#include +#include + +#include +#include + +static const unsigned char lzop_magic[] = { + 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a }; + +#define LZO_BLOCK_SIZE (256*1024l) +#define HEADER_HAS_FILTER 0x00000800L +#define HEADER_SIZE_MIN (9 + 7 + 4 + 8 + 1 + 4) +#define HEADER_SIZE_MAX (9 + 7 + 1 + 8 + 8 + 4 + 1 + 255 + 4) + +STATIC inline long INIT parse_header(u8 *input, long *skip, long in_len) +{ + int l; + u8 *parse = input; + u8 *end = input + in_len; + u16 version; + + /* + * Check that there's enough input to possibly have a valid header. + * Then it is possible to parse several fields until the minimum + * size may have been used. + */ + if (in_len < HEADER_SIZE_MIN) + return 0; + + /* read magic: 9 first bits */ + for (l = 0; l < 9; l++) { + if (*parse++ != lzop_magic[l]) + return 0; + } + /* get version (2bytes), skip library version (2), + * 'need to be extracted' version (2) and + * method (1) */ + version = get_unaligned_be16(parse); + parse += 7; + if (version >= 0x0940) + parse++; + if (get_unaligned_be32(parse) & HEADER_HAS_FILTER) + parse += 8; /* flags + filter info */ + else + parse += 4; /* flags */ + + /* + * At least mode, mtime_low, filename length, and checksum must + * be left to be parsed. If also mtime_high is present, it's OK + * because the next input buffer check is after reading the + * filename length. + */ + if (end - parse < 8 + 1 + 4) + return 0; + + /* skip mode and mtime_low */ + parse += 8; + if (version >= 0x0940) + parse += 4; /* skip mtime_high */ + + l = *parse++; + /* don't care about the file name, and skip checksum */ + if (end - parse < l + 4) + return 0; + parse += l + 4; + + *skip = parse - input; + return 1; +} + +STATIC int INIT unlzo(u8 *input, long in_len, + long (*fill)(void *, unsigned long), + long (*flush)(void *, unsigned long), + u8 *output, long *posp, + void (*error) (char *x)) +{ + u8 r = 0; + long skip = 0; + u32 src_len, dst_len; + size_t tmp; + u8 *in_buf, *in_buf_save, *out_buf; + int ret = -1; + + if (output) { + out_buf = output; + } else if (!flush) { + error("NULL output pointer and no flush function provided"); + goto exit; + } else { + out_buf = malloc(LZO_BLOCK_SIZE); + if (!out_buf) { + error("Could not allocate output buffer"); + goto exit; + } + } + + if (input && fill) { + error("Both input pointer and fill function provided, don't know what to do"); + goto exit_1; + } else if (input) { + in_buf = input; + } else if (!fill) { + error("NULL input pointer and missing fill function"); + goto exit_1; + } else { + in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE)); + if (!in_buf) { + error("Could not allocate input buffer"); + goto exit_1; + } + } + in_buf_save = in_buf; + + if (posp) + *posp = 0; + + if (fill) { + /* + * Start from in_buf + HEADER_SIZE_MAX to make it possible + * to use memcpy() to copy the unused data to the beginning + * of the buffer. This way memmove() isn't needed which + * is missing from pre-boot environments of most archs. + */ + in_buf += HEADER_SIZE_MAX; + in_len = fill(in_buf, HEADER_SIZE_MAX); + } + + if (!parse_header(in_buf, &skip, in_len)) { + error("invalid header"); + goto exit_2; + } + in_buf += skip; + in_len -= skip; + + if (fill) { + /* Move the unused data to the beginning of the buffer. */ + memcpy(in_buf_save, in_buf, in_len); + in_buf = in_buf_save; + } + + if (posp) + *posp = skip; + + for (;;) { + /* read uncompressed block size */ + if (fill && in_len < 4) { + skip = fill(in_buf + in_len, 4 - in_len); + if (skip > 0) + in_len += skip; + } + if (in_len < 4) { + error("file corrupted"); + goto exit_2; + } + dst_len = get_unaligned_be32(in_buf); + in_buf += 4; + in_len -= 4; + + /* exit if last block */ + if (dst_len == 0) { + if (posp) + *posp += 4; + break; + } + + if (dst_len > LZO_BLOCK_SIZE) { + error("dest len longer than block size"); + goto exit_2; + } + + /* read compressed block size, and skip block checksum info */ + if (fill && in_len < 8) { + skip = fill(in_buf + in_len, 8 - in_len); + if (skip > 0) + in_len += skip; + } + if (in_len < 8) { + error("file corrupted"); + goto exit_2; + } + src_len = get_unaligned_be32(in_buf); + in_buf += 8; + in_len -= 8; + + if (src_len <= 0 || src_len > dst_len) { + error("file corrupted"); + goto exit_2; + } + + /* decompress */ + if (fill && in_len < src_len) { + skip = fill(in_buf + in_len, src_len - in_len); + if (skip > 0) + in_len += skip; + } + if (in_len < src_len) { + error("file corrupted"); + goto exit_2; + } + tmp = dst_len; + + /* When the input data is not compressed at all, + * lzo1x_decompress_safe will fail, so call memcpy() + * instead */ + if (unlikely(dst_len == src_len)) + memcpy(out_buf, in_buf, src_len); + else { + r = lzo1x_decompress_safe((u8 *) in_buf, src_len, + out_buf, &tmp); + + if (r != LZO_E_OK || dst_len != tmp) { + error("Compressed data violation"); + goto exit_2; + } + } + + if (flush && flush(out_buf, dst_len) != dst_len) + goto exit_2; + if (output) + out_buf += dst_len; + if (posp) + *posp += src_len + 12; + + in_buf += src_len; + in_len -= src_len; + if (fill) { + /* + * If there happens to still be unused data left in + * in_buf, move it to the beginning of the buffer. + * Use a loop to avoid memmove() dependency. + */ + if (in_len > 0) + for (skip = 0; skip < in_len; ++skip) + in_buf_save[skip] = in_buf[skip]; + in_buf = in_buf_save; + } + } + + ret = 0; +exit_2: + if (!input) + free(in_buf_save); +exit_1: + if (!output) + free(out_buf); +exit: + return ret; +} + +#ifdef PREBOOT +STATIC int INIT __decompress(unsigned char *buf, long len, + long (*fill)(void*, unsigned long), + long (*flush)(void*, unsigned long), + unsigned char *out_buf, long olen, + long *pos, + void (*error)(char *x)) +{ + return unlzo(buf, len, fill, flush, out_buf, pos, error); +} +#endif -- cgit v1.2.3