From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/digsig.c | 279 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 279 insertions(+) create mode 100644 lib/digsig.c (limited to 'lib/digsig.c') diff --git a/lib/digsig.c b/lib/digsig.c new file mode 100644 index 000000000..04b5e55ed --- /dev/null +++ b/lib/digsig.c @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011 Nokia Corporation + * Copyright (C) 2011 Intel Corporation + * + * Author: + * Dmitry Kasatkin + * + * + * File: sign.c + * implements signature (RSA) verification + * pkcs decoding is based on LibTomCrypt code + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct crypto_shash *shash; + +static const char *pkcs_1_v1_5_decode_emsa(const unsigned char *msg, + unsigned long msglen, + unsigned long modulus_bitlen, + unsigned long *outlen) +{ + unsigned long modulus_len, ps_len, i; + + modulus_len = (modulus_bitlen >> 3) + (modulus_bitlen & 7 ? 1 : 0); + + /* test message size */ + if ((msglen > modulus_len) || (modulus_len < 11)) + return NULL; + + /* separate encoded message */ + if (msg[0] != 0x00 || msg[1] != 0x01) + return NULL; + + for (i = 2; i < modulus_len - 1; i++) + if (msg[i] != 0xFF) + break; + + /* separator check */ + if (msg[i] != 0) + /* There was no octet with hexadecimal value 0x00 + to separate ps from m. */ + return NULL; + + ps_len = i - 2; + + *outlen = (msglen - (2 + ps_len + 1)); + + return msg + 2 + ps_len + 1; +} + +/* + * RSA Signature verification with public key + */ +static int digsig_verify_rsa(struct key *key, + const char *sig, int siglen, + const char *h, int hlen) +{ + int err = -EINVAL; + unsigned long len; + unsigned long mlen, mblen; + unsigned nret, l; + int head, i; + unsigned char *out1 = NULL; + const char *m; + MPI in = NULL, res = NULL, pkey[2]; + uint8_t *p, *datap; + const uint8_t *endp; + const struct user_key_payload *ukp; + struct pubkey_hdr *pkh; + + down_read(&key->sem); + ukp = user_key_payload_locked(key); + + if (!ukp) { + /* key was revoked before we acquired its semaphore */ + err = -EKEYREVOKED; + goto err1; + } + + if (ukp->datalen < sizeof(*pkh)) + goto err1; + + pkh = (struct pubkey_hdr *)ukp->data; + + if (pkh->version != 1) + goto err1; + + if (pkh->algo != PUBKEY_ALGO_RSA) + goto err1; + + if (pkh->nmpi != 2) + goto err1; + + datap = pkh->mpi; + endp = ukp->data + ukp->datalen; + + for (i = 0; i < pkh->nmpi; i++) { + unsigned int remaining = endp - datap; + pkey[i] = mpi_read_from_buffer(datap, &remaining); + if (IS_ERR(pkey[i])) { + err = PTR_ERR(pkey[i]); + goto err; + } + datap += remaining; + } + + mblen = mpi_get_nbits(pkey[0]); + mlen = DIV_ROUND_UP(mblen, 8); + + if (mlen == 0) { + err = -EINVAL; + goto err; + } + + err = -ENOMEM; + + out1 = kzalloc(mlen, GFP_KERNEL); + if (!out1) + goto err; + + nret = siglen; + in = mpi_read_from_buffer(sig, &nret); + if (IS_ERR(in)) { + err = PTR_ERR(in); + goto err; + } + + res = mpi_alloc(mpi_get_nlimbs(in) * 2); + if (!res) + goto err; + + err = mpi_powm(res, in, pkey[1], pkey[0]); + if (err) + goto err; + + if (mpi_get_nlimbs(res) * BYTES_PER_MPI_LIMB > mlen) { + err = -EINVAL; + goto err; + } + + p = mpi_get_buffer(res, &l, NULL); + if (!p) { + err = -EINVAL; + goto err; + } + + len = mlen; + head = len - l; + memset(out1, 0, head); + memcpy(out1 + head, p, l); + + kfree(p); + + m = pkcs_1_v1_5_decode_emsa(out1, len, mblen, &len); + + if (!m || len != hlen || memcmp(m, h, hlen)) + err = -EINVAL; + +err: + mpi_free(in); + mpi_free(res); + kfree(out1); + while (--i >= 0) + mpi_free(pkey[i]); +err1: + up_read(&key->sem); + + return err; +} + +/** + * digsig_verify() - digital signature verification with public key + * @keyring: keyring to search key in + * @sig: digital signature + * @siglen: length of the signature + * @data: data + * @datalen: length of the data + * + * Returns 0 on success, -EINVAL otherwise + * + * Verifies data integrity against digital signature. + * Currently only RSA is supported. + * Normally hash of the content is used as a data for this function. + * + */ +int digsig_verify(struct key *keyring, const char *sig, int siglen, + const char *data, int datalen) +{ + int err = -ENOMEM; + struct signature_hdr *sh = (struct signature_hdr *)sig; + struct shash_desc *desc = NULL; + unsigned char hash[SHA1_DIGEST_SIZE]; + struct key *key; + char name[20]; + + if (siglen < sizeof(*sh) + 2) + return -EINVAL; + + if (sh->algo != PUBKEY_ALGO_RSA) + return -ENOTSUPP; + + sprintf(name, "%llX", __be64_to_cpup((uint64_t *)sh->keyid)); + + if (keyring) { + /* search in specific keyring */ + key_ref_t kref; + kref = keyring_search(make_key_ref(keyring, 1UL), + &key_type_user, name, true); + if (IS_ERR(kref)) + key = ERR_CAST(kref); + else + key = key_ref_to_ptr(kref); + } else { + key = request_key(&key_type_user, name, NULL); + } + if (IS_ERR(key)) { + pr_err("key not found, id: %s\n", name); + return PTR_ERR(key); + } + + desc = kzalloc(sizeof(*desc) + crypto_shash_descsize(shash), + GFP_KERNEL); + if (!desc) + goto err; + + desc->tfm = shash; + + crypto_shash_init(desc); + crypto_shash_update(desc, data, datalen); + crypto_shash_update(desc, sig, sizeof(*sh)); + crypto_shash_final(desc, hash); + + kfree(desc); + + /* pass signature mpis address */ + err = digsig_verify_rsa(key, sig + sizeof(*sh), siglen - sizeof(*sh), + hash, sizeof(hash)); + +err: + key_put(key); + + return err ? -EINVAL : 0; +} +EXPORT_SYMBOL_GPL(digsig_verify); + +static int __init digsig_init(void) +{ + shash = crypto_alloc_shash("sha1", 0, 0); + if (IS_ERR(shash)) { + pr_err("shash allocation failed\n"); + return PTR_ERR(shash); + } + + return 0; + +} + +static void __exit digsig_cleanup(void) +{ + crypto_free_shash(shash); +} + +module_init(digsig_init); +module_exit(digsig_cleanup); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3