From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/errseq.c | 207 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 207 insertions(+) create mode 100644 lib/errseq.c (limited to 'lib/errseq.c') diff --git a/lib/errseq.c b/lib/errseq.c new file mode 100644 index 000000000..93e9b9435 --- /dev/null +++ b/lib/errseq.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include + +/* + * An errseq_t is a way of recording errors in one place, and allowing any + * number of "subscribers" to tell whether it has changed since a previous + * point where it was sampled. + * + * It's implemented as an unsigned 32-bit value. The low order bits are + * designated to hold an error code (between 0 and -MAX_ERRNO). The upper bits + * are used as a counter. This is done with atomics instead of locking so that + * these functions can be called from any context. + * + * The general idea is for consumers to sample an errseq_t value. That value + * can later be used to tell whether any new errors have occurred since that + * sampling was done. + * + * Note that there is a risk of collisions if new errors are being recorded + * frequently, since we have so few bits to use as a counter. + * + * To mitigate this, one bit is used as a flag to tell whether the value has + * been sampled since a new value was recorded. That allows us to avoid bumping + * the counter if no one has sampled it since the last time an error was + * recorded. + * + * A new errseq_t should always be zeroed out. A errseq_t value of all zeroes + * is the special (but common) case where there has never been an error. An all + * zero value thus serves as the "epoch" if one wishes to know whether there + * has ever been an error set since it was first initialized. + */ + +/* The low bits are designated for error code (max of MAX_ERRNO) */ +#define ERRSEQ_SHIFT ilog2(MAX_ERRNO + 1) + +/* This bit is used as a flag to indicate whether the value has been seen */ +#define ERRSEQ_SEEN (1 << ERRSEQ_SHIFT) + +/* The lowest bit of the counter */ +#define ERRSEQ_CTR_INC (1 << (ERRSEQ_SHIFT + 1)) + +/** + * errseq_set - set a errseq_t for later reporting + * @eseq: errseq_t field that should be set + * @err: error to set (must be between -1 and -MAX_ERRNO) + * + * This function sets the error in @eseq, and increments the sequence counter + * if the last sequence was sampled at some point in the past. + * + * Any error set will always overwrite an existing error. + * + * Return: The previous value, primarily for debugging purposes. The + * return value should not be used as a previously sampled value in later + * calls as it will not have the SEEN flag set. + */ +errseq_t errseq_set(errseq_t *eseq, int err) +{ + errseq_t cur, old; + + /* MAX_ERRNO must be able to serve as a mask */ + BUILD_BUG_ON_NOT_POWER_OF_2(MAX_ERRNO + 1); + + /* + * Ensure the error code actually fits where we want it to go. If it + * doesn't then just throw a warning and don't record anything. We + * also don't accept zero here as that would effectively clear a + * previous error. + */ + old = READ_ONCE(*eseq); + + if (WARN(unlikely(err == 0 || (unsigned int)-err > MAX_ERRNO), + "err = %d\n", err)) + return old; + + for (;;) { + errseq_t new; + + /* Clear out error bits and set new error */ + new = (old & ~(MAX_ERRNO|ERRSEQ_SEEN)) | -err; + + /* Only increment if someone has looked at it */ + if (old & ERRSEQ_SEEN) + new += ERRSEQ_CTR_INC; + + /* If there would be no change, then call it done */ + if (new == old) { + cur = new; + break; + } + + /* Try to swap the new value into place */ + cur = cmpxchg(eseq, old, new); + + /* + * Call it success if we did the swap or someone else beat us + * to it for the same value. + */ + if (likely(cur == old || cur == new)) + break; + + /* Raced with an update, try again */ + old = cur; + } + return cur; +} +EXPORT_SYMBOL(errseq_set); + +/** + * errseq_sample() - Grab current errseq_t value. + * @eseq: Pointer to errseq_t to be sampled. + * + * This function allows callers to initialise their errseq_t variable. + * If the error has been "seen", new callers will not see an old error. + * If there is an unseen error in @eseq, the caller of this function will + * see it the next time it checks for an error. + * + * Context: Any context. + * Return: The current errseq value. + */ +errseq_t errseq_sample(errseq_t *eseq) +{ + errseq_t old = READ_ONCE(*eseq); + + /* If nobody has seen this error yet, then we can be the first. */ + if (!(old & ERRSEQ_SEEN)) + old = 0; + return old; +} +EXPORT_SYMBOL(errseq_sample); + +/** + * errseq_check() - Has an error occurred since a particular sample point? + * @eseq: Pointer to errseq_t value to be checked. + * @since: Previously-sampled errseq_t from which to check. + * + * Grab the value that eseq points to, and see if it has changed @since + * the given value was sampled. The @since value is not advanced, so there + * is no need to mark the value as seen. + * + * Return: The latest error set in the errseq_t or 0 if it hasn't changed. + */ +int errseq_check(errseq_t *eseq, errseq_t since) +{ + errseq_t cur = READ_ONCE(*eseq); + + if (likely(cur == since)) + return 0; + return -(cur & MAX_ERRNO); +} +EXPORT_SYMBOL(errseq_check); + +/** + * errseq_check_and_advance() - Check an errseq_t and advance to current value. + * @eseq: Pointer to value being checked and reported. + * @since: Pointer to previously-sampled errseq_t to check against and advance. + * + * Grab the eseq value, and see whether it matches the value that @since + * points to. If it does, then just return 0. + * + * If it doesn't, then the value has changed. Set the "seen" flag, and try to + * swap it into place as the new eseq value. Then, set that value as the new + * "since" value, and return whatever the error portion is set to. + * + * Note that no locking is provided here for concurrent updates to the "since" + * value. The caller must provide that if necessary. Because of this, callers + * may want to do a lockless errseq_check before taking the lock and calling + * this. + * + * Return: Negative errno if one has been stored, or 0 if no new error has + * occurred. + */ +int errseq_check_and_advance(errseq_t *eseq, errseq_t *since) +{ + int err = 0; + errseq_t old, new; + + /* + * Most callers will want to use the inline wrapper to check this, + * so that the common case of no error is handled without needing + * to take the lock that protects the "since" value. + */ + old = READ_ONCE(*eseq); + if (old != *since) { + /* + * Set the flag and try to swap it into place if it has + * changed. + * + * We don't care about the outcome of the swap here. If the + * swap doesn't occur, then it has either been updated by a + * writer who is altering the value in some way (updating + * counter or resetting the error), or another reader who is + * just setting the "seen" flag. Either outcome is OK, and we + * can advance "since" and return an error based on what we + * have. + */ + new = old | ERRSEQ_SEEN; + if (new != old) + cmpxchg(eseq, old, new); + *since = new; + err = -(new & MAX_ERRNO); + } + return err; +} +EXPORT_SYMBOL(errseq_check_and_advance); -- cgit v1.2.3