From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/mpi/mpi-div.c | 234 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 lib/mpi/mpi-div.c (limited to 'lib/mpi/mpi-div.c') diff --git a/lib/mpi/mpi-div.c b/lib/mpi/mpi-div.c new file mode 100644 index 000000000..45beab8b9 --- /dev/null +++ b/lib/mpi/mpi-div.c @@ -0,0 +1,234 @@ +/* mpi-div.c - MPI functions + * Copyright (C) 1994, 1996, 1998, 2001, 2002, + * 2003 Free Software Foundation, Inc. + * + * This file is part of Libgcrypt. + * + * Note: This code is heavily based on the GNU MP Library. + * Actually it's the same code with only minor changes in the + * way the data is stored; this is to support the abstraction + * of an optional secure memory allocation which may be used + * to avoid revealing of sensitive data due to paging etc. + */ + +#include "mpi-internal.h" +#include "longlong.h" + +void mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den); +void mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor); + +void mpi_fdiv_r(MPI rem, MPI dividend, MPI divisor) +{ + int divisor_sign = divisor->sign; + MPI temp_divisor = NULL; + + /* We need the original value of the divisor after the remainder has been + * preliminary calculated. We have to copy it to temporary space if it's + * the same variable as REM. + */ + if (rem == divisor) { + temp_divisor = mpi_copy(divisor); + divisor = temp_divisor; + } + + mpi_tdiv_r(rem, dividend, divisor); + + if (((divisor_sign?1:0) ^ (dividend->sign?1:0)) && rem->nlimbs) + mpi_add(rem, rem, divisor); + + if (temp_divisor) + mpi_free(temp_divisor); +} + +void mpi_fdiv_q(MPI quot, MPI dividend, MPI divisor) +{ + MPI tmp = mpi_alloc(mpi_get_nlimbs(quot)); + mpi_fdiv_qr(quot, tmp, dividend, divisor); + mpi_free(tmp); +} + +void mpi_fdiv_qr(MPI quot, MPI rem, MPI dividend, MPI divisor) +{ + int divisor_sign = divisor->sign; + MPI temp_divisor = NULL; + + if (quot == divisor || rem == divisor) { + temp_divisor = mpi_copy(divisor); + divisor = temp_divisor; + } + + mpi_tdiv_qr(quot, rem, dividend, divisor); + + if ((divisor_sign ^ dividend->sign) && rem->nlimbs) { + mpi_sub_ui(quot, quot, 1); + mpi_add(rem, rem, divisor); + } + + if (temp_divisor) + mpi_free(temp_divisor); +} + +/* If den == quot, den needs temporary storage. + * If den == rem, den needs temporary storage. + * If num == quot, num needs temporary storage. + * If den has temporary storage, it can be normalized while being copied, + * i.e no extra storage should be allocated. + */ + +void mpi_tdiv_r(MPI rem, MPI num, MPI den) +{ + mpi_tdiv_qr(NULL, rem, num, den); +} + +void mpi_tdiv_qr(MPI quot, MPI rem, MPI num, MPI den) +{ + mpi_ptr_t np, dp; + mpi_ptr_t qp, rp; + mpi_size_t nsize = num->nlimbs; + mpi_size_t dsize = den->nlimbs; + mpi_size_t qsize, rsize; + mpi_size_t sign_remainder = num->sign; + mpi_size_t sign_quotient = num->sign ^ den->sign; + unsigned int normalization_steps; + mpi_limb_t q_limb; + mpi_ptr_t marker[5]; + int markidx = 0; + + /* Ensure space is enough for quotient and remainder. + * We need space for an extra limb in the remainder, because it's + * up-shifted (normalized) below. + */ + rsize = nsize + 1; + mpi_resize(rem, rsize); + + qsize = rsize - dsize; /* qsize cannot be bigger than this. */ + if (qsize <= 0) { + if (num != rem) { + rem->nlimbs = num->nlimbs; + rem->sign = num->sign; + MPN_COPY(rem->d, num->d, nsize); + } + if (quot) { + /* This needs to follow the assignment to rem, in case the + * numerator and quotient are the same. + */ + quot->nlimbs = 0; + quot->sign = 0; + } + return; + } + + if (quot) + mpi_resize(quot, qsize); + + /* Read pointers here, when reallocation is finished. */ + np = num->d; + dp = den->d; + rp = rem->d; + + /* Optimize division by a single-limb divisor. */ + if (dsize == 1) { + mpi_limb_t rlimb; + if (quot) { + qp = quot->d; + rlimb = mpihelp_divmod_1(qp, np, nsize, dp[0]); + qsize -= qp[qsize - 1] == 0; + quot->nlimbs = qsize; + quot->sign = sign_quotient; + } else + rlimb = mpihelp_mod_1(np, nsize, dp[0]); + rp[0] = rlimb; + rsize = rlimb != 0?1:0; + rem->nlimbs = rsize; + rem->sign = sign_remainder; + return; + } + + + if (quot) { + qp = quot->d; + /* Make sure QP and NP point to different objects. Otherwise the + * numerator would be gradually overwritten by the quotient limbs. + */ + if (qp == np) { /* Copy NP object to temporary space. */ + np = marker[markidx++] = mpi_alloc_limb_space(nsize); + MPN_COPY(np, qp, nsize); + } + } else /* Put quotient at top of remainder. */ + qp = rp + dsize; + + normalization_steps = count_leading_zeros(dp[dsize - 1]); + + /* Normalize the denominator, i.e. make its most significant bit set by + * shifting it NORMALIZATION_STEPS bits to the left. Also shift the + * numerator the same number of steps (to keep the quotient the same!). + */ + if (normalization_steps) { + mpi_ptr_t tp; + mpi_limb_t nlimb; + + /* Shift up the denominator setting the most significant bit of + * the most significant word. Use temporary storage not to clobber + * the original contents of the denominator. + */ + tp = marker[markidx++] = mpi_alloc_limb_space(dsize); + mpihelp_lshift(tp, dp, dsize, normalization_steps); + dp = tp; + + /* Shift up the numerator, possibly introducing a new most + * significant word. Move the shifted numerator in the remainder + * meanwhile. + */ + nlimb = mpihelp_lshift(rp, np, nsize, normalization_steps); + if (nlimb) { + rp[nsize] = nlimb; + rsize = nsize + 1; + } else + rsize = nsize; + } else { + /* The denominator is already normalized, as required. Copy it to + * temporary space if it overlaps with the quotient or remainder. + */ + if (dp == rp || (quot && (dp == qp))) { + mpi_ptr_t tp; + + tp = marker[markidx++] = mpi_alloc_limb_space(dsize); + MPN_COPY(tp, dp, dsize); + dp = tp; + } + + /* Move the numerator to the remainder. */ + if (rp != np) + MPN_COPY(rp, np, nsize); + + rsize = nsize; + } + + q_limb = mpihelp_divrem(qp, 0, rp, rsize, dp, dsize); + + if (quot) { + qsize = rsize - dsize; + if (q_limb) { + qp[qsize] = q_limb; + qsize += 1; + } + + quot->nlimbs = qsize; + quot->sign = sign_quotient; + } + + rsize = dsize; + MPN_NORMALIZE(rp, rsize); + + if (normalization_steps && rsize) { + mpihelp_rshift(rp, rp, rsize, normalization_steps); + rsize -= rp[rsize - 1] == 0?1:0; + } + + rem->nlimbs = rsize; + rem->sign = sign_remainder; + while (markidx) { + markidx--; + mpi_free_limb_space(marker[markidx]); + } +} -- cgit v1.2.3