From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/mpi/mpi-mod.c | 157 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 lib/mpi/mpi-mod.c (limited to 'lib/mpi/mpi-mod.c') diff --git a/lib/mpi/mpi-mod.c b/lib/mpi/mpi-mod.c new file mode 100644 index 000000000..54fcc0156 --- /dev/null +++ b/lib/mpi/mpi-mod.c @@ -0,0 +1,157 @@ +/* mpi-mod.c - Modular reduction + * Copyright (C) 1998, 1999, 2001, 2002, 2003, + * 2007 Free Software Foundation, Inc. + * + * This file is part of Libgcrypt. + */ + + +#include "mpi-internal.h" +#include "longlong.h" + +/* Context used with Barrett reduction. */ +struct barrett_ctx_s { + MPI m; /* The modulus - may not be modified. */ + int m_copied; /* If true, M needs to be released. */ + int k; + MPI y; + MPI r1; /* Helper MPI. */ + MPI r2; /* Helper MPI. */ + MPI r3; /* Helper MPI allocated on demand. */ +}; + + + +void mpi_mod(MPI rem, MPI dividend, MPI divisor) +{ + mpi_fdiv_r(rem, dividend, divisor); +} + +/* This function returns a new context for Barrett based operations on + * the modulus M. This context needs to be released using + * _gcry_mpi_barrett_free. If COPY is true M will be transferred to + * the context and the user may change M. If COPY is false, M may not + * be changed until gcry_mpi_barrett_free has been called. + */ +mpi_barrett_t mpi_barrett_init(MPI m, int copy) +{ + mpi_barrett_t ctx; + MPI tmp; + + mpi_normalize(m); + ctx = kcalloc(1, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return NULL; + + if (copy) { + ctx->m = mpi_copy(m); + ctx->m_copied = 1; + } else + ctx->m = m; + + ctx->k = mpi_get_nlimbs(m); + tmp = mpi_alloc(ctx->k + 1); + + /* Barrett precalculation: y = floor(b^(2k) / m). */ + mpi_set_ui(tmp, 1); + mpi_lshift_limbs(tmp, 2 * ctx->k); + mpi_fdiv_q(tmp, tmp, m); + + ctx->y = tmp; + ctx->r1 = mpi_alloc(2 * ctx->k + 1); + ctx->r2 = mpi_alloc(2 * ctx->k + 1); + + return ctx; +} + +void mpi_barrett_free(mpi_barrett_t ctx) +{ + if (ctx) { + mpi_free(ctx->y); + mpi_free(ctx->r1); + mpi_free(ctx->r2); + if (ctx->r3) + mpi_free(ctx->r3); + if (ctx->m_copied) + mpi_free(ctx->m); + kfree(ctx); + } +} + + +/* R = X mod M + * + * Using Barrett reduction. Before using this function + * _gcry_mpi_barrett_init must have been called to do the + * precalculations. CTX is the context created by this precalculation + * and also conveys M. If the Barret reduction could no be done a + * straightforward reduction method is used. + * + * We assume that these conditions are met: + * Input: x =(x_2k-1 ...x_0)_b + * m =(m_k-1 ....m_0)_b with m_k-1 != 0 + * Output: r = x mod m + */ +void mpi_mod_barrett(MPI r, MPI x, mpi_barrett_t ctx) +{ + MPI m = ctx->m; + int k = ctx->k; + MPI y = ctx->y; + MPI r1 = ctx->r1; + MPI r2 = ctx->r2; + int sign; + + mpi_normalize(x); + if (mpi_get_nlimbs(x) > 2*k) { + mpi_mod(r, x, m); + return; + } + + sign = x->sign; + x->sign = 0; + + /* 1. q1 = floor( x / b^k-1) + * q2 = q1 * y + * q3 = floor( q2 / b^k+1 ) + * Actually, we don't need qx, we can work direct on r2 + */ + mpi_set(r2, x); + mpi_rshift_limbs(r2, k-1); + mpi_mul(r2, r2, y); + mpi_rshift_limbs(r2, k+1); + + /* 2. r1 = x mod b^k+1 + * r2 = q3 * m mod b^k+1 + * r = r1 - r2 + * 3. if r < 0 then r = r + b^k+1 + */ + mpi_set(r1, x); + if (r1->nlimbs > k+1) /* Quick modulo operation. */ + r1->nlimbs = k+1; + mpi_mul(r2, r2, m); + if (r2->nlimbs > k+1) /* Quick modulo operation. */ + r2->nlimbs = k+1; + mpi_sub(r, r1, r2); + + if (mpi_has_sign(r)) { + if (!ctx->r3) { + ctx->r3 = mpi_alloc(k + 2); + mpi_set_ui(ctx->r3, 1); + mpi_lshift_limbs(ctx->r3, k + 1); + } + mpi_add(r, r, ctx->r3); + } + + /* 4. while r >= m do r = r - m */ + while (mpi_cmp(r, m) >= 0) + mpi_sub(r, r, m); + + x->sign = sign; +} + + +void mpi_mul_barrett(MPI w, MPI u, MPI v, mpi_barrett_t ctx) +{ + mpi_mul(w, u, v); + mpi_mod_barrett(w, w, ctx); +} -- cgit v1.2.3