From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/mpi/mpiutil.c | 330 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 330 insertions(+) create mode 100644 lib/mpi/mpiutil.c (limited to 'lib/mpi/mpiutil.c') diff --git a/lib/mpi/mpiutil.c b/lib/mpi/mpiutil.c new file mode 100644 index 000000000..aa8c46544 --- /dev/null +++ b/lib/mpi/mpiutil.c @@ -0,0 +1,330 @@ +/* mpiutil.ac - Utility functions for MPI + * Copyright (C) 1998, 1999 Free Software Foundation, Inc. + * + * This file is part of GnuPG. + * + * GnuPG is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * GnuPG is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + */ + +#include "mpi-internal.h" + +/* Constants allocated right away at startup. */ +static MPI constants[MPI_NUMBER_OF_CONSTANTS]; + +/* Initialize the MPI subsystem. This is called early and allows to + * do some initialization without taking care of threading issues. + */ +static int __init mpi_init(void) +{ + int idx; + unsigned long value; + + for (idx = 0; idx < MPI_NUMBER_OF_CONSTANTS; idx++) { + switch (idx) { + case MPI_C_ZERO: + value = 0; + break; + case MPI_C_ONE: + value = 1; + break; + case MPI_C_TWO: + value = 2; + break; + case MPI_C_THREE: + value = 3; + break; + case MPI_C_FOUR: + value = 4; + break; + case MPI_C_EIGHT: + value = 8; + break; + default: + pr_err("MPI: invalid mpi_const selector %d\n", idx); + return -EFAULT; + } + constants[idx] = mpi_alloc_set_ui(value); + constants[idx]->flags = (16|32); + } + + return 0; +} +postcore_initcall(mpi_init); + +/* Return a constant MPI descripbed by NO which is one of the + * MPI_C_xxx macros. There is no need to copy this returned value; it + * may be used directly. + */ +MPI mpi_const(enum gcry_mpi_constants no) +{ + if ((int)no < 0 || no > MPI_NUMBER_OF_CONSTANTS) + pr_err("MPI: invalid mpi_const selector %d\n", no); + if (!constants[no]) + pr_err("MPI: MPI subsystem not initialized\n"); + return constants[no]; +} +EXPORT_SYMBOL_GPL(mpi_const); + +/**************** + * Note: It was a bad idea to use the number of limbs to allocate + * because on a alpha the limbs are large but we normally need + * integers of n bits - So we should change this to bits (or bytes). + * + * But mpi_alloc is used in a lot of places :-) + */ +MPI mpi_alloc(unsigned nlimbs) +{ + MPI a; + + a = kmalloc(sizeof *a, GFP_KERNEL); + if (!a) + return a; + + if (nlimbs) { + a->d = mpi_alloc_limb_space(nlimbs); + if (!a->d) { + kfree(a); + return NULL; + } + } else { + a->d = NULL; + } + + a->alloced = nlimbs; + a->nlimbs = 0; + a->sign = 0; + a->flags = 0; + a->nbits = 0; + return a; +} +EXPORT_SYMBOL_GPL(mpi_alloc); + +mpi_ptr_t mpi_alloc_limb_space(unsigned nlimbs) +{ + size_t len = nlimbs * sizeof(mpi_limb_t); + + if (!len) + return NULL; + + return kmalloc(len, GFP_KERNEL); +} + +void mpi_free_limb_space(mpi_ptr_t a) +{ + if (!a) + return; + + kfree_sensitive(a); +} + +void mpi_assign_limb_space(MPI a, mpi_ptr_t ap, unsigned nlimbs) +{ + mpi_free_limb_space(a->d); + a->d = ap; + a->alloced = nlimbs; +} + +/**************** + * Resize the array of A to NLIMBS. the additional space is cleared + * (set to 0) [done by m_realloc()] + */ +int mpi_resize(MPI a, unsigned nlimbs) +{ + void *p; + + if (nlimbs <= a->alloced) + return 0; /* no need to do it */ + + if (a->d) { + p = kcalloc(nlimbs, sizeof(mpi_limb_t), GFP_KERNEL); + if (!p) + return -ENOMEM; + memcpy(p, a->d, a->alloced * sizeof(mpi_limb_t)); + kfree_sensitive(a->d); + a->d = p; + } else { + a->d = kcalloc(nlimbs, sizeof(mpi_limb_t), GFP_KERNEL); + if (!a->d) + return -ENOMEM; + } + a->alloced = nlimbs; + return 0; +} + +void mpi_clear(MPI a) +{ + if (!a) + return; + a->nlimbs = 0; + a->flags = 0; +} +EXPORT_SYMBOL_GPL(mpi_clear); + +void mpi_free(MPI a) +{ + if (!a) + return; + + if (a->flags & 4) + kfree_sensitive(a->d); + else + mpi_free_limb_space(a->d); + + if (a->flags & ~7) + pr_info("invalid flag value in mpi\n"); + kfree(a); +} +EXPORT_SYMBOL_GPL(mpi_free); + +/**************** + * Note: This copy function should not interpret the MPI + * but copy it transparently. + */ +MPI mpi_copy(MPI a) +{ + int i; + MPI b; + + if (a) { + b = mpi_alloc(a->nlimbs); + b->nlimbs = a->nlimbs; + b->sign = a->sign; + b->flags = a->flags; + b->flags &= ~(16|32); /* Reset the immutable and constant flags. */ + for (i = 0; i < b->nlimbs; i++) + b->d[i] = a->d[i]; + } else + b = NULL; + return b; +} + +/**************** + * This function allocates an MPI which is optimized to hold + * a value as large as the one given in the argument and allocates it + * with the same flags as A. + */ +MPI mpi_alloc_like(MPI a) +{ + MPI b; + + if (a) { + b = mpi_alloc(a->nlimbs); + b->nlimbs = 0; + b->sign = 0; + b->flags = a->flags; + } else + b = NULL; + + return b; +} + + +/* Set U into W and release U. If W is NULL only U will be released. */ +void mpi_snatch(MPI w, MPI u) +{ + if (w) { + mpi_assign_limb_space(w, u->d, u->alloced); + w->nlimbs = u->nlimbs; + w->sign = u->sign; + w->flags = u->flags; + u->alloced = 0; + u->nlimbs = 0; + u->d = NULL; + } + mpi_free(u); +} + + +MPI mpi_set(MPI w, MPI u) +{ + mpi_ptr_t wp, up; + mpi_size_t usize = u->nlimbs; + int usign = u->sign; + + if (!w) + w = mpi_alloc(mpi_get_nlimbs(u)); + RESIZE_IF_NEEDED(w, usize); + wp = w->d; + up = u->d; + MPN_COPY(wp, up, usize); + w->nlimbs = usize; + w->flags = u->flags; + w->flags &= ~(16|32); /* Reset the immutable and constant flags. */ + w->sign = usign; + return w; +} +EXPORT_SYMBOL_GPL(mpi_set); + +MPI mpi_set_ui(MPI w, unsigned long u) +{ + if (!w) + w = mpi_alloc(1); + /* FIXME: If U is 0 we have no need to resize and thus possible + * allocating the limbs. + */ + RESIZE_IF_NEEDED(w, 1); + w->d[0] = u; + w->nlimbs = u ? 1 : 0; + w->sign = 0; + w->flags = 0; + return w; +} +EXPORT_SYMBOL_GPL(mpi_set_ui); + +MPI mpi_alloc_set_ui(unsigned long u) +{ + MPI w = mpi_alloc(1); + w->d[0] = u; + w->nlimbs = u ? 1 : 0; + w->sign = 0; + return w; +} + +/**************** + * Swap the value of A and B, when SWAP is 1. + * Leave the value when SWAP is 0. + * This implementation should be constant-time regardless of SWAP. + */ +void mpi_swap_cond(MPI a, MPI b, unsigned long swap) +{ + mpi_size_t i; + mpi_size_t nlimbs; + mpi_limb_t mask = ((mpi_limb_t)0) - swap; + mpi_limb_t x; + + if (a->alloced > b->alloced) + nlimbs = b->alloced; + else + nlimbs = a->alloced; + if (a->nlimbs > nlimbs || b->nlimbs > nlimbs) + return; + + for (i = 0; i < nlimbs; i++) { + x = mask & (a->d[i] ^ b->d[i]); + a->d[i] = a->d[i] ^ x; + b->d[i] = b->d[i] ^ x; + } + + x = mask & (a->nlimbs ^ b->nlimbs); + a->nlimbs = a->nlimbs ^ x; + b->nlimbs = b->nlimbs ^ x; + + x = mask & (a->sign ^ b->sign); + a->sign = a->sign ^ x; + b->sign = b->sign ^ x; +} + +MODULE_DESCRIPTION("Multiprecision maths library"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3