From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/plist.c | 263 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 263 insertions(+) create mode 100644 lib/plist.c (limited to 'lib/plist.c') diff --git a/lib/plist.c b/lib/plist.c new file mode 100644 index 000000000..0d86ed7a7 --- /dev/null +++ b/lib/plist.c @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * lib/plist.c + * + * Descending-priority-sorted double-linked list + * + * (C) 2002-2003 Intel Corp + * Inaky Perez-Gonzalez . + * + * 2001-2005 (c) MontaVista Software, Inc. + * Daniel Walker + * + * (C) 2005 Thomas Gleixner + * + * Simplifications of the original code by + * Oleg Nesterov + * + * Based on simple lists (include/linux/list.h). + * + * This file contains the add / del functions which are considered to + * be too large to inline. See include/linux/plist.h for further + * information. + */ + +#include +#include + +#ifdef CONFIG_DEBUG_PLIST + +static struct plist_head test_head; + +static void plist_check_prev_next(struct list_head *t, struct list_head *p, + struct list_head *n) +{ + WARN(n->prev != p || p->next != n, + "top: %p, n: %p, p: %p\n" + "prev: %p, n: %p, p: %p\n" + "next: %p, n: %p, p: %p\n", + t, t->next, t->prev, + p, p->next, p->prev, + n, n->next, n->prev); +} + +static void plist_check_list(struct list_head *top) +{ + struct list_head *prev = top, *next = top->next; + + plist_check_prev_next(top, prev, next); + while (next != top) { + prev = next; + next = prev->next; + plist_check_prev_next(top, prev, next); + } +} + +static void plist_check_head(struct plist_head *head) +{ + if (!plist_head_empty(head)) + plist_check_list(&plist_first(head)->prio_list); + plist_check_list(&head->node_list); +} + +#else +# define plist_check_head(h) do { } while (0) +#endif + +/** + * plist_add - add @node to @head + * + * @node: &struct plist_node pointer + * @head: &struct plist_head pointer + */ +void plist_add(struct plist_node *node, struct plist_head *head) +{ + struct plist_node *first, *iter, *prev = NULL; + struct list_head *node_next = &head->node_list; + + plist_check_head(head); + WARN_ON(!plist_node_empty(node)); + WARN_ON(!list_empty(&node->prio_list)); + + if (plist_head_empty(head)) + goto ins_node; + + first = iter = plist_first(head); + + do { + if (node->prio < iter->prio) { + node_next = &iter->node_list; + break; + } + + prev = iter; + iter = list_entry(iter->prio_list.next, + struct plist_node, prio_list); + } while (iter != first); + + if (!prev || prev->prio != node->prio) + list_add_tail(&node->prio_list, &iter->prio_list); +ins_node: + list_add_tail(&node->node_list, node_next); + + plist_check_head(head); +} + +/** + * plist_del - Remove a @node from plist. + * + * @node: &struct plist_node pointer - entry to be removed + * @head: &struct plist_head pointer - list head + */ +void plist_del(struct plist_node *node, struct plist_head *head) +{ + plist_check_head(head); + + if (!list_empty(&node->prio_list)) { + if (node->node_list.next != &head->node_list) { + struct plist_node *next; + + next = list_entry(node->node_list.next, + struct plist_node, node_list); + + /* add the next plist_node into prio_list */ + if (list_empty(&next->prio_list)) + list_add(&next->prio_list, &node->prio_list); + } + list_del_init(&node->prio_list); + } + + list_del_init(&node->node_list); + + plist_check_head(head); +} + +/** + * plist_requeue - Requeue @node at end of same-prio entries. + * + * This is essentially an optimized plist_del() followed by + * plist_add(). It moves an entry already in the plist to + * after any other same-priority entries. + * + * @node: &struct plist_node pointer - entry to be moved + * @head: &struct plist_head pointer - list head + */ +void plist_requeue(struct plist_node *node, struct plist_head *head) +{ + struct plist_node *iter; + struct list_head *node_next = &head->node_list; + + plist_check_head(head); + BUG_ON(plist_head_empty(head)); + BUG_ON(plist_node_empty(node)); + + if (node == plist_last(head)) + return; + + iter = plist_next(node); + + if (node->prio != iter->prio) + return; + + plist_del(node, head); + + plist_for_each_continue(iter, head) { + if (node->prio != iter->prio) { + node_next = &iter->node_list; + break; + } + } + list_add_tail(&node->node_list, node_next); + + plist_check_head(head); +} + +#ifdef CONFIG_DEBUG_PLIST +#include +#include +#include +#include + +static struct plist_node __initdata test_node[241]; + +static void __init plist_test_check(int nr_expect) +{ + struct plist_node *first, *prio_pos, *node_pos; + + if (plist_head_empty(&test_head)) { + BUG_ON(nr_expect != 0); + return; + } + + prio_pos = first = plist_first(&test_head); + plist_for_each(node_pos, &test_head) { + if (nr_expect-- < 0) + break; + if (node_pos == first) + continue; + if (node_pos->prio == prio_pos->prio) { + BUG_ON(!list_empty(&node_pos->prio_list)); + continue; + } + + BUG_ON(prio_pos->prio > node_pos->prio); + BUG_ON(prio_pos->prio_list.next != &node_pos->prio_list); + prio_pos = node_pos; + } + + BUG_ON(nr_expect != 0); + BUG_ON(prio_pos->prio_list.next != &first->prio_list); +} + +static void __init plist_test_requeue(struct plist_node *node) +{ + plist_requeue(node, &test_head); + + if (node != plist_last(&test_head)) + BUG_ON(node->prio == plist_next(node)->prio); +} + +static int __init plist_test(void) +{ + int nr_expect = 0, i, loop; + unsigned int r = local_clock(); + + printk(KERN_DEBUG "start plist test\n"); + plist_head_init(&test_head); + for (i = 0; i < ARRAY_SIZE(test_node); i++) + plist_node_init(test_node + i, 0); + + for (loop = 0; loop < 1000; loop++) { + r = r * 193939 % 47629; + i = r % ARRAY_SIZE(test_node); + if (plist_node_empty(test_node + i)) { + r = r * 193939 % 47629; + test_node[i].prio = r % 99; + plist_add(test_node + i, &test_head); + nr_expect++; + } else { + plist_del(test_node + i, &test_head); + nr_expect--; + } + plist_test_check(nr_expect); + if (!plist_node_empty(test_node + i)) { + plist_test_requeue(test_node + i); + plist_test_check(nr_expect); + } + } + + for (i = 0; i < ARRAY_SIZE(test_node); i++) { + if (plist_node_empty(test_node + i)) + continue; + plist_del(test_node + i, &test_head); + nr_expect--; + plist_test_check(nr_expect); + } + + printk(KERN_DEBUG "end plist test\n"); + return 0; +} + +module_init(plist_test); + +#endif -- cgit v1.2.3