From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- lib/xz/xz_dec_test.c | 220 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 lib/xz/xz_dec_test.c (limited to 'lib/xz/xz_dec_test.c') diff --git a/lib/xz/xz_dec_test.c b/lib/xz/xz_dec_test.c new file mode 100644 index 000000000..da28a19d6 --- /dev/null +++ b/lib/xz/xz_dec_test.c @@ -0,0 +1,220 @@ +/* + * XZ decoder tester + * + * Author: Lasse Collin + * + * This file has been put into the public domain. + * You can do whatever you want with this file. + */ + +#include +#include +#include +#include +#include +#include + +/* Maximum supported dictionary size */ +#define DICT_MAX (1 << 20) + +/* Device name to pass to register_chrdev(). */ +#define DEVICE_NAME "xz_dec_test" + +/* Dynamically allocated device major number */ +static int device_major; + +/* + * We reuse the same decoder state, and thus can decode only one + * file at a time. + */ +static bool device_is_open; + +/* XZ decoder state */ +static struct xz_dec *state; + +/* + * Return value of xz_dec_run(). We need to avoid calling xz_dec_run() after + * it has returned XZ_STREAM_END, so we make this static. + */ +static enum xz_ret ret; + +/* + * Input and output buffers. The input buffer is used as a temporary safe + * place for the data coming from the userspace. + */ +static uint8_t buffer_in[1024]; +static uint8_t buffer_out[1024]; + +/* + * Structure to pass the input and output buffers to the XZ decoder. + * A few of the fields are never modified so we initialize them here. + */ +static struct xz_buf buffers = { + .in = buffer_in, + .out = buffer_out, + .out_size = sizeof(buffer_out) +}; + +/* + * CRC32 of uncompressed data. This is used to give the user a simple way + * to check that the decoder produces correct output. + */ +static uint32_t crc; + +static int xz_dec_test_open(struct inode *i, struct file *f) +{ + if (device_is_open) + return -EBUSY; + + device_is_open = true; + + xz_dec_reset(state); + ret = XZ_OK; + crc = 0xFFFFFFFF; + + buffers.in_pos = 0; + buffers.in_size = 0; + buffers.out_pos = 0; + + printk(KERN_INFO DEVICE_NAME ": opened\n"); + return 0; +} + +static int xz_dec_test_release(struct inode *i, struct file *f) +{ + device_is_open = false; + + if (ret == XZ_OK) + printk(KERN_INFO DEVICE_NAME ": input was truncated\n"); + + printk(KERN_INFO DEVICE_NAME ": closed\n"); + return 0; +} + +/* + * Decode the data given to us from the userspace. CRC32 of the uncompressed + * data is calculated and is printed at the end of successful decoding. The + * uncompressed data isn't stored anywhere for further use. + * + * The .xz file must have exactly one Stream and no Stream Padding. The data + * after the first Stream is considered to be garbage. + */ +static ssize_t xz_dec_test_write(struct file *file, const char __user *buf, + size_t size, loff_t *pos) +{ + size_t remaining; + + if (ret != XZ_OK) { + if (size > 0) + printk(KERN_INFO DEVICE_NAME ": %zu bytes of " + "garbage at the end of the file\n", + size); + + return -ENOSPC; + } + + printk(KERN_INFO DEVICE_NAME ": decoding %zu bytes of input\n", + size); + + remaining = size; + while ((remaining > 0 || buffers.out_pos == buffers.out_size) + && ret == XZ_OK) { + if (buffers.in_pos == buffers.in_size) { + buffers.in_pos = 0; + buffers.in_size = min(remaining, sizeof(buffer_in)); + if (copy_from_user(buffer_in, buf, buffers.in_size)) + return -EFAULT; + + buf += buffers.in_size; + remaining -= buffers.in_size; + } + + buffers.out_pos = 0; + ret = xz_dec_run(state, &buffers); + crc = crc32(crc, buffer_out, buffers.out_pos); + } + + switch (ret) { + case XZ_OK: + printk(KERN_INFO DEVICE_NAME ": XZ_OK\n"); + return size; + + case XZ_STREAM_END: + printk(KERN_INFO DEVICE_NAME ": XZ_STREAM_END, " + "CRC32 = 0x%08X\n", ~crc); + return size - remaining - (buffers.in_size - buffers.in_pos); + + case XZ_MEMLIMIT_ERROR: + printk(KERN_INFO DEVICE_NAME ": XZ_MEMLIMIT_ERROR\n"); + break; + + case XZ_FORMAT_ERROR: + printk(KERN_INFO DEVICE_NAME ": XZ_FORMAT_ERROR\n"); + break; + + case XZ_OPTIONS_ERROR: + printk(KERN_INFO DEVICE_NAME ": XZ_OPTIONS_ERROR\n"); + break; + + case XZ_DATA_ERROR: + printk(KERN_INFO DEVICE_NAME ": XZ_DATA_ERROR\n"); + break; + + case XZ_BUF_ERROR: + printk(KERN_INFO DEVICE_NAME ": XZ_BUF_ERROR\n"); + break; + + default: + printk(KERN_INFO DEVICE_NAME ": Bug detected!\n"); + break; + } + + return -EIO; +} + +/* Allocate the XZ decoder state and register the character device. */ +static int __init xz_dec_test_init(void) +{ + static const struct file_operations fileops = { + .owner = THIS_MODULE, + .open = &xz_dec_test_open, + .release = &xz_dec_test_release, + .write = &xz_dec_test_write + }; + + state = xz_dec_init(XZ_PREALLOC, DICT_MAX); + if (state == NULL) + return -ENOMEM; + + device_major = register_chrdev(0, DEVICE_NAME, &fileops); + if (device_major < 0) { + xz_dec_end(state); + return device_major; + } + + printk(KERN_INFO DEVICE_NAME ": module loaded\n"); + printk(KERN_INFO DEVICE_NAME ": Create a device node with " + "'mknod " DEVICE_NAME " c %d 0' and write .xz files " + "to it.\n", device_major); + return 0; +} + +static void __exit xz_dec_test_exit(void) +{ + unregister_chrdev(device_major, DEVICE_NAME); + xz_dec_end(state); + printk(KERN_INFO DEVICE_NAME ": module unloaded\n"); +} + +module_init(xz_dec_test_init); +module_exit(xz_dec_test_exit); + +MODULE_DESCRIPTION("XZ decompressor tester"); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Lasse Collin "); + +/* + * This code is in the public domain, but in Linux it's simplest to just + * say it's GPL and consider the authors as the copyright holders. + */ +MODULE_LICENSE("GPL"); -- cgit v1.2.3