From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- mm/damon/lru_sort.c | 323 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 323 insertions(+) create mode 100644 mm/damon/lru_sort.c (limited to 'mm/damon/lru_sort.c') diff --git a/mm/damon/lru_sort.c b/mm/damon/lru_sort.c new file mode 100644 index 000000000..7b8fce2f6 --- /dev/null +++ b/mm/damon/lru_sort.c @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DAMON-based LRU-lists Sorting + * + * Author: SeongJae Park + */ + +#define pr_fmt(fmt) "damon-lru-sort: " fmt + +#include +#include +#include + +#include "modules-common.h" + +#ifdef MODULE_PARAM_PREFIX +#undef MODULE_PARAM_PREFIX +#endif +#define MODULE_PARAM_PREFIX "damon_lru_sort." + +/* + * Enable or disable DAMON_LRU_SORT. + * + * You can enable DAMON_LRU_SORT by setting the value of this parameter as + * ``Y``. Setting it as ``N`` disables DAMON_LRU_SORT. Note that + * DAMON_LRU_SORT could do no real monitoring and LRU-lists sorting due to the + * watermarks-based activation condition. Refer to below descriptions for the + * watermarks parameter for this. + */ +static bool enabled __read_mostly; + +/* + * Make DAMON_LRU_SORT reads the input parameters again, except ``enabled``. + * + * Input parameters that updated while DAMON_LRU_SORT is running are not + * applied by default. Once this parameter is set as ``Y``, DAMON_LRU_SORT + * reads values of parametrs except ``enabled`` again. Once the re-reading is + * done, this parameter is set as ``N``. If invalid parameters are found while + * the re-reading, DAMON_LRU_SORT will be disabled. + */ +static bool commit_inputs __read_mostly; +module_param(commit_inputs, bool, 0600); + +/* + * Access frequency threshold for hot memory regions identification in permil. + * + * If a memory region is accessed in frequency of this or higher, + * DAMON_LRU_SORT identifies the region as hot, and mark it as accessed on the + * LRU list, so that it could not be reclaimed under memory pressure. 50% by + * default. + */ +static unsigned long hot_thres_access_freq = 500; +module_param(hot_thres_access_freq, ulong, 0600); + +/* + * Time threshold for cold memory regions identification in microseconds. + * + * If a memory region is not accessed for this or longer time, DAMON_LRU_SORT + * identifies the region as cold, and mark it as unaccessed on the LRU list, so + * that it could be reclaimed first under memory pressure. 120 seconds by + * default. + */ +static unsigned long cold_min_age __read_mostly = 120000000; +module_param(cold_min_age, ulong, 0600); + +static struct damos_quota damon_lru_sort_quota = { + /* Use up to 10 ms per 1 sec, by default */ + .ms = 10, + .sz = 0, + .reset_interval = 1000, + /* Within the quota, mark hotter regions accessed first. */ + .weight_sz = 0, + .weight_nr_accesses = 1, + .weight_age = 0, +}; +DEFINE_DAMON_MODULES_DAMOS_TIME_QUOTA(damon_lru_sort_quota); + +static struct damos_watermarks damon_lru_sort_wmarks = { + .metric = DAMOS_WMARK_FREE_MEM_RATE, + .interval = 5000000, /* 5 seconds */ + .high = 200, /* 20 percent */ + .mid = 150, /* 15 percent */ + .low = 50, /* 5 percent */ +}; +DEFINE_DAMON_MODULES_WMARKS_PARAMS(damon_lru_sort_wmarks); + +static struct damon_attrs damon_lru_sort_mon_attrs = { + .sample_interval = 5000, /* 5 ms */ + .aggr_interval = 100000, /* 100 ms */ + .ops_update_interval = 0, + .min_nr_regions = 10, + .max_nr_regions = 1000, +}; +DEFINE_DAMON_MODULES_MON_ATTRS_PARAMS(damon_lru_sort_mon_attrs); + +/* + * Start of the target memory region in physical address. + * + * The start physical address of memory region that DAMON_LRU_SORT will do work + * against. By default, biggest System RAM is used as the region. + */ +static unsigned long monitor_region_start __read_mostly; +module_param(monitor_region_start, ulong, 0600); + +/* + * End of the target memory region in physical address. + * + * The end physical address of memory region that DAMON_LRU_SORT will do work + * against. By default, biggest System RAM is used as the region. + */ +static unsigned long monitor_region_end __read_mostly; +module_param(monitor_region_end, ulong, 0600); + +/* + * PID of the DAMON thread + * + * If DAMON_LRU_SORT is enabled, this becomes the PID of the worker thread. + * Else, -1. + */ +static int kdamond_pid __read_mostly = -1; +module_param(kdamond_pid, int, 0400); + +static struct damos_stat damon_lru_sort_hot_stat; +DEFINE_DAMON_MODULES_DAMOS_STATS_PARAMS(damon_lru_sort_hot_stat, + lru_sort_tried_hot_regions, lru_sorted_hot_regions, + hot_quota_exceeds); + +static struct damos_stat damon_lru_sort_cold_stat; +DEFINE_DAMON_MODULES_DAMOS_STATS_PARAMS(damon_lru_sort_cold_stat, + lru_sort_tried_cold_regions, lru_sorted_cold_regions, + cold_quota_exceeds); + +static struct damos_access_pattern damon_lru_sort_stub_pattern = { + /* Find regions having PAGE_SIZE or larger size */ + .min_sz_region = PAGE_SIZE, + .max_sz_region = ULONG_MAX, + /* no matter its access frequency */ + .min_nr_accesses = 0, + .max_nr_accesses = UINT_MAX, + /* no matter its age */ + .min_age_region = 0, + .max_age_region = UINT_MAX, +}; + +static struct damon_ctx *ctx; +static struct damon_target *target; + +static struct damos *damon_lru_sort_new_scheme( + struct damos_access_pattern *pattern, enum damos_action action) +{ + struct damos_quota quota = damon_lru_sort_quota; + + /* Use half of total quota for hot/cold pages sorting */ + quota.ms = quota.ms / 2; + + return damon_new_scheme( + /* find the pattern, and */ + pattern, + /* (de)prioritize on LRU-lists */ + action, + /* under the quota. */ + "a, + /* (De)activate this according to the watermarks. */ + &damon_lru_sort_wmarks); +} + +/* Create a DAMON-based operation scheme for hot memory regions */ +static struct damos *damon_lru_sort_new_hot_scheme(unsigned int hot_thres) +{ + struct damos_access_pattern pattern = damon_lru_sort_stub_pattern; + + pattern.min_nr_accesses = hot_thres; + return damon_lru_sort_new_scheme(&pattern, DAMOS_LRU_PRIO); +} + +/* Create a DAMON-based operation scheme for cold memory regions */ +static struct damos *damon_lru_sort_new_cold_scheme(unsigned int cold_thres) +{ + struct damos_access_pattern pattern = damon_lru_sort_stub_pattern; + + pattern.max_nr_accesses = 0; + pattern.min_age_region = cold_thres; + return damon_lru_sort_new_scheme(&pattern, DAMOS_LRU_DEPRIO); +} + +static int damon_lru_sort_apply_parameters(void) +{ + struct damos *scheme; + unsigned int hot_thres, cold_thres; + int err = 0; + + err = damon_set_attrs(ctx, &damon_lru_sort_mon_attrs); + if (err) + return err; + + /* aggr_interval / sample_interval is the maximum nr_accesses */ + hot_thres = damon_lru_sort_mon_attrs.aggr_interval / + damon_lru_sort_mon_attrs.sample_interval * + hot_thres_access_freq / 1000; + scheme = damon_lru_sort_new_hot_scheme(hot_thres); + if (!scheme) + return -ENOMEM; + damon_set_schemes(ctx, &scheme, 1); + + cold_thres = cold_min_age / damon_lru_sort_mon_attrs.aggr_interval; + scheme = damon_lru_sort_new_cold_scheme(cold_thres); + if (!scheme) + return -ENOMEM; + damon_add_scheme(ctx, scheme); + + return damon_set_region_biggest_system_ram_default(target, + &monitor_region_start, + &monitor_region_end); +} + +static int damon_lru_sort_turn(bool on) +{ + int err; + + if (!on) { + err = damon_stop(&ctx, 1); + if (!err) + kdamond_pid = -1; + return err; + } + + err = damon_lru_sort_apply_parameters(); + if (err) + return err; + + err = damon_start(&ctx, 1, true); + if (err) + return err; + kdamond_pid = ctx->kdamond->pid; + return 0; +} + +static int damon_lru_sort_enabled_store(const char *val, + const struct kernel_param *kp) +{ + bool is_enabled = enabled; + bool enable; + int err; + + err = kstrtobool(val, &enable); + if (err) + return err; + + if (is_enabled == enable) + return 0; + + /* Called before init function. The function will handle this. */ + if (!ctx) + goto set_param_out; + + err = damon_lru_sort_turn(enable); + if (err) + return err; + +set_param_out: + enabled = enable; + return err; +} + +static const struct kernel_param_ops enabled_param_ops = { + .set = damon_lru_sort_enabled_store, + .get = param_get_bool, +}; + +module_param_cb(enabled, &enabled_param_ops, &enabled, 0600); +MODULE_PARM_DESC(enabled, + "Enable or disable DAMON_LRU_SORT (default: disabled)"); + +static int damon_lru_sort_handle_commit_inputs(void) +{ + int err; + + if (!commit_inputs) + return 0; + + err = damon_lru_sort_apply_parameters(); + commit_inputs = false; + return err; +} + +static int damon_lru_sort_after_aggregation(struct damon_ctx *c) +{ + struct damos *s; + + /* update the stats parameter */ + damon_for_each_scheme(s, c) { + if (s->action == DAMOS_LRU_PRIO) + damon_lru_sort_hot_stat = s->stat; + else if (s->action == DAMOS_LRU_DEPRIO) + damon_lru_sort_cold_stat = s->stat; + } + + return damon_lru_sort_handle_commit_inputs(); +} + +static int damon_lru_sort_after_wmarks_check(struct damon_ctx *c) +{ + return damon_lru_sort_handle_commit_inputs(); +} + +static int __init damon_lru_sort_init(void) +{ + int err = damon_modules_new_paddr_ctx_target(&ctx, &target); + + if (err) + return err; + + ctx->callback.after_wmarks_check = damon_lru_sort_after_wmarks_check; + ctx->callback.after_aggregation = damon_lru_sort_after_aggregation; + + /* 'enabled' has set before this function, probably via command line */ + if (enabled) + err = damon_lru_sort_turn(true); + + return err; +} + +module_init(damon_lru_sort_init); -- cgit v1.2.3