From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/batman-adv/bat_algo.c | 209 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 209 insertions(+) create mode 100644 net/batman-adv/bat_algo.c (limited to 'net/batman-adv/bat_algo.c') diff --git a/net/batman-adv/bat_algo.c b/net/batman-adv/bat_algo.c new file mode 100644 index 000000000..4eee53d19 --- /dev/null +++ b/net/batman-adv/bat_algo.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) B.A.T.M.A.N. contributors: + * + * Marek Lindner, Simon Wunderlich + */ + +#include "main.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bat_algo.h" +#include "netlink.h" + +char batadv_routing_algo[20] = "BATMAN_IV"; +static struct hlist_head batadv_algo_list; + +/** + * batadv_algo_init() - Initialize batman-adv algorithm management data + * structures + */ +void batadv_algo_init(void) +{ + INIT_HLIST_HEAD(&batadv_algo_list); +} + +/** + * batadv_algo_get() - Search for algorithm with specific name + * @name: algorithm name to find + * + * Return: Pointer to batadv_algo_ops on success, NULL otherwise + */ +struct batadv_algo_ops *batadv_algo_get(const char *name) +{ + struct batadv_algo_ops *bat_algo_ops = NULL, *bat_algo_ops_tmp; + + hlist_for_each_entry(bat_algo_ops_tmp, &batadv_algo_list, list) { + if (strcmp(bat_algo_ops_tmp->name, name) != 0) + continue; + + bat_algo_ops = bat_algo_ops_tmp; + break; + } + + return bat_algo_ops; +} + +/** + * batadv_algo_register() - Register callbacks for a mesh algorithm + * @bat_algo_ops: mesh algorithm callbacks to add + * + * Return: 0 on success or negative error number in case of failure + */ +int batadv_algo_register(struct batadv_algo_ops *bat_algo_ops) +{ + struct batadv_algo_ops *bat_algo_ops_tmp; + + bat_algo_ops_tmp = batadv_algo_get(bat_algo_ops->name); + if (bat_algo_ops_tmp) { + pr_info("Trying to register already registered routing algorithm: %s\n", + bat_algo_ops->name); + return -EEXIST; + } + + /* all algorithms must implement all ops (for now) */ + if (!bat_algo_ops->iface.enable || + !bat_algo_ops->iface.disable || + !bat_algo_ops->iface.update_mac || + !bat_algo_ops->iface.primary_set || + !bat_algo_ops->neigh.cmp || + !bat_algo_ops->neigh.is_similar_or_better) { + pr_info("Routing algo '%s' does not implement required ops\n", + bat_algo_ops->name); + return -EINVAL; + } + + INIT_HLIST_NODE(&bat_algo_ops->list); + hlist_add_head(&bat_algo_ops->list, &batadv_algo_list); + + return 0; +} + +/** + * batadv_algo_select() - Select algorithm of soft interface + * @bat_priv: the bat priv with all the soft interface information + * @name: name of the algorithm to select + * + * The algorithm callbacks for the soft interface will be set when the algorithm + * with the correct name was found. Any previous selected algorithm will not be + * deinitialized and the new selected algorithm will also not be initialized. + * It is therefore not allowed to call batadv_algo_select outside the creation + * function of the soft interface. + * + * Return: 0 on success or negative error number in case of failure + */ +int batadv_algo_select(struct batadv_priv *bat_priv, const char *name) +{ + struct batadv_algo_ops *bat_algo_ops; + + bat_algo_ops = batadv_algo_get(name); + if (!bat_algo_ops) + return -EINVAL; + + bat_priv->algo_ops = bat_algo_ops; + + return 0; +} + +static int batadv_param_set_ra(const char *val, const struct kernel_param *kp) +{ + struct batadv_algo_ops *bat_algo_ops; + char *algo_name = (char *)val; + size_t name_len = strlen(algo_name); + + if (name_len > 0 && algo_name[name_len - 1] == '\n') + algo_name[name_len - 1] = '\0'; + + bat_algo_ops = batadv_algo_get(algo_name); + if (!bat_algo_ops) { + pr_err("Routing algorithm '%s' is not supported\n", algo_name); + return -EINVAL; + } + + return param_set_copystring(algo_name, kp); +} + +static const struct kernel_param_ops batadv_param_ops_ra = { + .set = batadv_param_set_ra, + .get = param_get_string, +}; + +static struct kparam_string batadv_param_string_ra = { + .maxlen = sizeof(batadv_routing_algo), + .string = batadv_routing_algo, +}; + +module_param_cb(routing_algo, &batadv_param_ops_ra, &batadv_param_string_ra, + 0644); + +/** + * batadv_algo_dump_entry() - fill in information about one supported routing + * algorithm + * @msg: netlink message to be sent back + * @portid: Port to reply to + * @seq: Sequence number of message + * @bat_algo_ops: Algorithm to be dumped + * + * Return: Error number, or 0 on success + */ +static int batadv_algo_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, + struct batadv_algo_ops *bat_algo_ops) +{ + void *hdr; + + hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, + NLM_F_MULTI, BATADV_CMD_GET_ROUTING_ALGOS); + if (!hdr) + return -EMSGSIZE; + + if (nla_put_string(msg, BATADV_ATTR_ALGO_NAME, bat_algo_ops->name)) + goto nla_put_failure; + + genlmsg_end(msg, hdr); + return 0; + + nla_put_failure: + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; +} + +/** + * batadv_algo_dump() - fill in information about supported routing + * algorithms + * @msg: netlink message to be sent back + * @cb: Parameters to the netlink request + * + * Return: Length of reply message. + */ +int batadv_algo_dump(struct sk_buff *msg, struct netlink_callback *cb) +{ + int portid = NETLINK_CB(cb->skb).portid; + struct batadv_algo_ops *bat_algo_ops; + int skip = cb->args[0]; + int i = 0; + + hlist_for_each_entry(bat_algo_ops, &batadv_algo_list, list) { + if (i++ < skip) + continue; + + if (batadv_algo_dump_entry(msg, portid, cb->nlh->nlmsg_seq, + bat_algo_ops)) { + i--; + break; + } + } + + cb->args[0] = i; + + return msg->len; +} -- cgit v1.2.3