From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/caif/caif_usb.c | 212 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 212 insertions(+) create mode 100644 net/caif/caif_usb.c (limited to 'net/caif/caif_usb.c') diff --git a/net/caif/caif_usb.c b/net/caif/caif_usb.c new file mode 100644 index 000000000..ebc202ffd --- /dev/null +++ b/net/caif/caif_usb.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * CAIF USB handler + * Copyright (C) ST-Ericsson AB 2011 + * Author: Sjur Brendeland + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); + +#define CFUSB_PAD_DESCR_SZ 1 /* Alignment descriptor length */ +#define CFUSB_ALIGNMENT 4 /* Number of bytes to align. */ +#define CFUSB_MAX_HEADLEN (CFUSB_PAD_DESCR_SZ + CFUSB_ALIGNMENT-1) +#define STE_USB_VID 0x04cc /* USB Product ID for ST-Ericsson */ +#define STE_USB_PID_CAIF 0x230f /* Product id for CAIF Modems */ + +struct cfusbl { + struct cflayer layer; + u8 tx_eth_hdr[ETH_HLEN]; +}; + +static bool pack_added; + +static int cfusbl_receive(struct cflayer *layr, struct cfpkt *pkt) +{ + u8 hpad; + + /* Remove padding. */ + cfpkt_extr_head(pkt, &hpad, 1); + cfpkt_extr_head(pkt, NULL, hpad); + return layr->up->receive(layr->up, pkt); +} + +static int cfusbl_transmit(struct cflayer *layr, struct cfpkt *pkt) +{ + struct caif_payload_info *info; + u8 hpad; + u8 zeros[CFUSB_ALIGNMENT]; + struct sk_buff *skb; + struct cfusbl *usbl = container_of(layr, struct cfusbl, layer); + + skb = cfpkt_tonative(pkt); + + skb_reset_network_header(skb); + skb->protocol = htons(ETH_P_IP); + + info = cfpkt_info(pkt); + hpad = (info->hdr_len + CFUSB_PAD_DESCR_SZ) & (CFUSB_ALIGNMENT - 1); + + if (skb_headroom(skb) < ETH_HLEN + CFUSB_PAD_DESCR_SZ + hpad) { + pr_warn("Headroom too small\n"); + kfree_skb(skb); + return -EIO; + } + memset(zeros, 0, hpad); + + cfpkt_add_head(pkt, zeros, hpad); + cfpkt_add_head(pkt, &hpad, 1); + cfpkt_add_head(pkt, usbl->tx_eth_hdr, sizeof(usbl->tx_eth_hdr)); + return layr->dn->transmit(layr->dn, pkt); +} + +static void cfusbl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl, + int phyid) +{ + if (layr->up && layr->up->ctrlcmd) + layr->up->ctrlcmd(layr->up, ctrl, layr->id); +} + +static struct cflayer *cfusbl_create(int phyid, const u8 ethaddr[ETH_ALEN], + u8 braddr[ETH_ALEN]) +{ + struct cfusbl *this = kmalloc(sizeof(struct cfusbl), GFP_ATOMIC); + + if (!this) + return NULL; + + caif_assert(offsetof(struct cfusbl, layer) == 0); + + memset(&this->layer, 0, sizeof(this->layer)); + this->layer.receive = cfusbl_receive; + this->layer.transmit = cfusbl_transmit; + this->layer.ctrlcmd = cfusbl_ctrlcmd; + snprintf(this->layer.name, CAIF_LAYER_NAME_SZ, "usb%d", phyid); + this->layer.id = phyid; + + /* + * Construct TX ethernet header: + * 0-5 destination address + * 5-11 source address + * 12-13 protocol type + */ + ether_addr_copy(&this->tx_eth_hdr[ETH_ALEN], braddr); + ether_addr_copy(&this->tx_eth_hdr[ETH_ALEN], ethaddr); + this->tx_eth_hdr[12] = cpu_to_be16(ETH_P_802_EX1) & 0xff; + this->tx_eth_hdr[13] = (cpu_to_be16(ETH_P_802_EX1) >> 8) & 0xff; + pr_debug("caif ethernet TX-header dst:%pM src:%pM type:%02x%02x\n", + this->tx_eth_hdr, this->tx_eth_hdr + ETH_ALEN, + this->tx_eth_hdr[12], this->tx_eth_hdr[13]); + + return (struct cflayer *) this; +} + +static void cfusbl_release(struct cflayer *layer) +{ + kfree(layer); +} + +static struct packet_type caif_usb_type __read_mostly = { + .type = cpu_to_be16(ETH_P_802_EX1), +}; + +static int cfusbl_device_notify(struct notifier_block *me, unsigned long what, + void *ptr) +{ + struct net_device *dev = netdev_notifier_info_to_dev(ptr); + struct caif_dev_common common; + struct cflayer *layer, *link_support; + struct usbnet *usbnet; + struct usb_device *usbdev; + int res; + + /* Check whether we have a NCM device, and find its VID/PID. */ + if (!(dev->dev.parent && dev->dev.parent->driver && + strcmp(dev->dev.parent->driver->name, "cdc_ncm") == 0)) + return 0; + + usbnet = netdev_priv(dev); + usbdev = usbnet->udev; + + pr_debug("USB CDC NCM device VID:0x%4x PID:0x%4x\n", + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct)); + + /* Check for VID/PID that supports CAIF */ + if (!(le16_to_cpu(usbdev->descriptor.idVendor) == STE_USB_VID && + le16_to_cpu(usbdev->descriptor.idProduct) == STE_USB_PID_CAIF)) + return 0; + + if (what == NETDEV_UNREGISTER) + module_put(THIS_MODULE); + + if (what != NETDEV_REGISTER) + return 0; + + __module_get(THIS_MODULE); + + memset(&common, 0, sizeof(common)); + common.use_frag = false; + common.use_fcs = false; + common.use_stx = false; + common.link_select = CAIF_LINK_HIGH_BANDW; + common.flowctrl = NULL; + + link_support = cfusbl_create(dev->ifindex, dev->dev_addr, + dev->broadcast); + + if (!link_support) + return -ENOMEM; + + if (dev->num_tx_queues > 1) + pr_warn("USB device uses more than one tx queue\n"); + + res = caif_enroll_dev(dev, &common, link_support, CFUSB_MAX_HEADLEN, + &layer, &caif_usb_type.func); + if (res) + goto err; + + if (!pack_added) + dev_add_pack(&caif_usb_type); + pack_added = true; + + strscpy(layer->name, dev->name, sizeof(layer->name)); + + return 0; +err: + cfusbl_release(link_support); + return res; +} + +static struct notifier_block caif_device_notifier = { + .notifier_call = cfusbl_device_notify, + .priority = 0, +}; + +static int __init cfusbl_init(void) +{ + return register_netdevice_notifier(&caif_device_notifier); +} + +static void __exit cfusbl_exit(void) +{ + unregister_netdevice_notifier(&caif_device_notifier); + dev_remove_pack(&caif_usb_type); +} + +module_init(cfusbl_init); +module_exit(cfusbl_exit); -- cgit v1.2.3