From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/can/j1939/address-claim.c | 270 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100644 net/can/j1939/address-claim.c (limited to 'net/can/j1939/address-claim.c') diff --git a/net/can/j1939/address-claim.c b/net/can/j1939/address-claim.c new file mode 100644 index 000000000..ca4ad6cdd --- /dev/null +++ b/net/can/j1939/address-claim.c @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2010-2011 EIA Electronics, +// Kurt Van Dijck +// Copyright (c) 2010-2011 EIA Electronics, +// Pieter Beyens +// Copyright (c) 2017-2019 Pengutronix, +// Marc Kleine-Budde +// Copyright (c) 2017-2019 Pengutronix, +// Oleksij Rempel + +/* J1939 Address Claiming. + * Address Claiming in the kernel + * - keeps track of the AC states of ECU's, + * - resolves NAME<=>SA taking into account the AC states of ECU's. + * + * All Address Claim msgs (including host-originated msg) are processed + * at the receive path (a sent msg is always received again via CAN echo). + * As such, the processing of AC msgs is done in the order on which msgs + * are sent on the bus. + * + * This module doesn't send msgs itself (e.g. replies on Address Claims), + * this is the responsibility of a user space application or daemon. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include + +#include "j1939-priv.h" + +static inline name_t j1939_skb_to_name(const struct sk_buff *skb) +{ + return le64_to_cpup((__le64 *)skb->data); +} + +static inline bool j1939_ac_msg_is_request(struct sk_buff *skb) +{ + struct j1939_sk_buff_cb *skcb = j1939_skb_to_cb(skb); + int req_pgn; + + if (skb->len < 3 || skcb->addr.pgn != J1939_PGN_REQUEST) + return false; + + req_pgn = skb->data[0] | (skb->data[1] << 8) | (skb->data[2] << 16); + + return req_pgn == J1939_PGN_ADDRESS_CLAIMED; +} + +static int j1939_ac_verify_outgoing(struct j1939_priv *priv, + struct sk_buff *skb) +{ + struct j1939_sk_buff_cb *skcb = j1939_skb_to_cb(skb); + + if (skb->len != 8) { + netdev_notice(priv->ndev, "tx address claim with dlc %i\n", + skb->len); + return -EPROTO; + } + + if (skcb->addr.src_name != j1939_skb_to_name(skb)) { + netdev_notice(priv->ndev, "tx address claim with different name\n"); + return -EPROTO; + } + + if (skcb->addr.sa == J1939_NO_ADDR) { + netdev_notice(priv->ndev, "tx address claim with broadcast sa\n"); + return -EPROTO; + } + + /* ac must always be a broadcast */ + if (skcb->addr.dst_name || skcb->addr.da != J1939_NO_ADDR) { + netdev_notice(priv->ndev, "tx address claim with dest, not broadcast\n"); + return -EPROTO; + } + return 0; +} + +int j1939_ac_fixup(struct j1939_priv *priv, struct sk_buff *skb) +{ + struct j1939_sk_buff_cb *skcb = j1939_skb_to_cb(skb); + int ret; + u8 addr; + + /* network mgmt: address claiming msgs */ + if (skcb->addr.pgn == J1939_PGN_ADDRESS_CLAIMED) { + struct j1939_ecu *ecu; + + ret = j1939_ac_verify_outgoing(priv, skb); + /* return both when failure & when successful */ + if (ret < 0) + return ret; + ecu = j1939_ecu_get_by_name(priv, skcb->addr.src_name); + if (!ecu) + return -ENODEV; + + if (ecu->addr != skcb->addr.sa) + /* hold further traffic for ecu, remove from parent */ + j1939_ecu_unmap(ecu); + j1939_ecu_put(ecu); + } else if (skcb->addr.src_name) { + /* assign source address */ + addr = j1939_name_to_addr(priv, skcb->addr.src_name); + if (!j1939_address_is_unicast(addr) && + !j1939_ac_msg_is_request(skb)) { + netdev_notice(priv->ndev, "tx drop: invalid sa for name 0x%016llx\n", + skcb->addr.src_name); + return -EADDRNOTAVAIL; + } + skcb->addr.sa = addr; + } + + /* assign destination address */ + if (skcb->addr.dst_name) { + addr = j1939_name_to_addr(priv, skcb->addr.dst_name); + if (!j1939_address_is_unicast(addr)) { + netdev_notice(priv->ndev, "tx drop: invalid da for name 0x%016llx\n", + skcb->addr.dst_name); + return -EADDRNOTAVAIL; + } + skcb->addr.da = addr; + } + return 0; +} + +static void j1939_ac_process(struct j1939_priv *priv, struct sk_buff *skb) +{ + struct j1939_sk_buff_cb *skcb = j1939_skb_to_cb(skb); + struct j1939_ecu *ecu, *prev; + name_t name; + + if (skb->len != 8) { + netdev_notice(priv->ndev, "rx address claim with wrong dlc %i\n", + skb->len); + return; + } + + name = j1939_skb_to_name(skb); + skcb->addr.src_name = name; + if (!name) { + netdev_notice(priv->ndev, "rx address claim without name\n"); + return; + } + + if (!j1939_address_is_valid(skcb->addr.sa)) { + netdev_notice(priv->ndev, "rx address claim with broadcast sa\n"); + return; + } + + write_lock_bh(&priv->lock); + + /* Few words on the ECU ref counting: + * + * First we get an ECU handle, either with + * j1939_ecu_get_by_name_locked() (increments the ref counter) + * or j1939_ecu_create_locked() (initializes an ECU object + * with a ref counter of 1). + * + * j1939_ecu_unmap_locked() will decrement the ref counter, + * but only if the ECU was mapped before. So "ecu" still + * belongs to us. + * + * j1939_ecu_timer_start() will increment the ref counter + * before it starts the timer, so we can put the ecu when + * leaving this function. + */ + ecu = j1939_ecu_get_by_name_locked(priv, name); + + if (ecu && ecu->addr == skcb->addr.sa) { + /* The ISO 11783-5 standard, in "4.5.2 - Address claim + * requirements", states: + * d) No CF shall begin, or resume, transmission on the + * network until 250 ms after it has successfully claimed + * an address except when responding to a request for + * address-claimed. + * + * But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim + * prioritization" show that the CF begins the transmission + * after 250 ms from the first AC (address-claimed) message + * even if it sends another AC message during that time window + * to resolve the address contention with another CF. + * + * As stated in "4.4.2.3 - Address-claimed message": + * In order to successfully claim an address, the CF sending + * an address claimed message shall not receive a contending + * claim from another CF for at least 250 ms. + * + * As stated in "4.4.3.2 - NAME management (NM) message": + * 1) A commanding CF can + * d) request that a CF with a specified NAME transmit + * the address-claimed message with its current NAME. + * 2) A target CF shall + * d) send an address-claimed message in response to a + * request for a matching NAME + * + * Taking the above arguments into account, the 250 ms wait is + * requested only during network initialization. + * + * Do not restart the timer on AC message if both the NAME and + * the address match and so if the address has already been + * claimed (timer has expired) or the AC message has been sent + * to resolve the contention with another CF (timer is still + * running). + */ + goto out_ecu_put; + } + + if (!ecu && j1939_address_is_unicast(skcb->addr.sa)) + ecu = j1939_ecu_create_locked(priv, name); + + if (IS_ERR_OR_NULL(ecu)) + goto out_unlock_bh; + + /* cancel pending (previous) address claim */ + j1939_ecu_timer_cancel(ecu); + + if (j1939_address_is_idle(skcb->addr.sa)) { + j1939_ecu_unmap_locked(ecu); + goto out_ecu_put; + } + + /* save new addr */ + if (ecu->addr != skcb->addr.sa) + j1939_ecu_unmap_locked(ecu); + ecu->addr = skcb->addr.sa; + + prev = j1939_ecu_get_by_addr_locked(priv, skcb->addr.sa); + if (prev) { + if (ecu->name > prev->name) { + j1939_ecu_unmap_locked(ecu); + j1939_ecu_put(prev); + goto out_ecu_put; + } else { + /* kick prev if less or equal */ + j1939_ecu_unmap_locked(prev); + j1939_ecu_put(prev); + } + } + + j1939_ecu_timer_start(ecu); + out_ecu_put: + j1939_ecu_put(ecu); + out_unlock_bh: + write_unlock_bh(&priv->lock); +} + +void j1939_ac_recv(struct j1939_priv *priv, struct sk_buff *skb) +{ + struct j1939_sk_buff_cb *skcb = j1939_skb_to_cb(skb); + struct j1939_ecu *ecu; + + /* network mgmt */ + if (skcb->addr.pgn == J1939_PGN_ADDRESS_CLAIMED) { + j1939_ac_process(priv, skb); + } else if (j1939_address_is_unicast(skcb->addr.sa)) { + /* assign source name */ + ecu = j1939_ecu_get_by_addr(priv, skcb->addr.sa); + if (ecu) { + skcb->addr.src_name = ecu->name; + j1939_ecu_put(ecu); + } + } + + /* assign destination name */ + ecu = j1939_ecu_get_by_addr(priv, skcb->addr.da); + if (ecu) { + skcb->addr.dst_name = ecu->name; + j1939_ecu_put(ecu); + } +} -- cgit v1.2.3