From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/dsa/Kconfig | 175 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 net/dsa/Kconfig (limited to 'net/dsa/Kconfig') diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig new file mode 100644 index 000000000..8e698bea9 --- /dev/null +++ b/net/dsa/Kconfig @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: GPL-2.0-only + +menuconfig NET_DSA + tristate "Distributed Switch Architecture" + depends on BRIDGE || BRIDGE=n + depends on HSR || HSR=n + depends on INET && NETDEVICES + select GRO_CELLS + select NET_SWITCHDEV + select PHYLINK + select NET_DEVLINK + imply NET_SELFTESTS + help + Say Y if you want to enable support for the hardware switches supported + by the Distributed Switch Architecture. + +if NET_DSA + +# Drivers must select the appropriate tagging format(s) + +config NET_DSA_TAG_NONE + tristate "No-op tag driver" + help + Say Y or M if you want to enable support for switches which don't tag + frames over the CPU port. + +config NET_DSA_TAG_AR9331 + tristate "Tag driver for Atheros AR9331 SoC with built-in switch" + help + Say Y or M if you want to enable support for tagging frames for + the Atheros AR9331 SoC with built-in switch. + +config NET_DSA_TAG_BRCM_COMMON + tristate + default n + +config NET_DSA_TAG_BRCM + tristate "Tag driver for Broadcom switches using in-frame headers" + select NET_DSA_TAG_BRCM_COMMON + help + Say Y if you want to enable support for tagging frames for the + Broadcom switches which place the tag after the MAC source address. + +config NET_DSA_TAG_BRCM_LEGACY + tristate "Tag driver for Broadcom legacy switches using in-frame headers" + select NET_DSA_TAG_BRCM_COMMON + help + Say Y if you want to enable support for tagging frames for the + Broadcom legacy switches which place the tag after the MAC source + address. + +config NET_DSA_TAG_BRCM_PREPEND + tristate "Tag driver for Broadcom switches using prepended headers" + select NET_DSA_TAG_BRCM_COMMON + help + Say Y if you want to enable support for tagging frames for the + Broadcom switches which places the tag before the Ethernet header + (prepended). + +config NET_DSA_TAG_HELLCREEK + tristate "Tag driver for Hirschmann Hellcreek TSN switches" + help + Say Y or M if you want to enable support for tagging frames + for the Hirschmann Hellcreek TSN switches. + +config NET_DSA_TAG_GSWIP + tristate "Tag driver for Lantiq / Intel GSWIP switches" + help + Say Y or M if you want to enable support for tagging frames for the + Lantiq / Intel GSWIP switches. + +config NET_DSA_TAG_DSA_COMMON + tristate + +config NET_DSA_TAG_DSA + tristate "Tag driver for Marvell switches using DSA headers" + select NET_DSA_TAG_DSA_COMMON + help + Say Y or M if you want to enable support for tagging frames for the + Marvell switches which use DSA headers. + +config NET_DSA_TAG_EDSA + tristate "Tag driver for Marvell switches using EtherType DSA headers" + select NET_DSA_TAG_DSA_COMMON + help + Say Y or M if you want to enable support for tagging frames for the + Marvell switches which use EtherType DSA headers. + +config NET_DSA_TAG_MTK + tristate "Tag driver for Mediatek switches" + help + Say Y or M if you want to enable support for tagging frames for + Mediatek switches. + +config NET_DSA_TAG_KSZ + tristate "Tag driver for Microchip 8795/937x/9477/9893 families of switches" + help + Say Y if you want to enable support for tagging frames for the + Microchip 8795/937x/9477/9893 families of switches. + +config NET_DSA_TAG_OCELOT + tristate "Tag driver for Ocelot family of switches, using NPI port" + select PACKING + help + Say Y or M if you want to enable NPI tagging for the Ocelot switches + (VSC7511, VSC7512, VSC7513, VSC7514, VSC9953, VSC9959). In this mode, + the frames over the Ethernet CPU port are prepended with a + hardware-defined injection/extraction frame header. Flow control + (PAUSE frames) over the CPU port is not supported when operating in + this mode. + +config NET_DSA_TAG_OCELOT_8021Q + tristate "Tag driver for Ocelot family of switches, using VLAN" + help + Say Y or M if you want to enable support for tagging frames with a + custom VLAN-based header. Frames that require timestamping, such as + PTP, are not delivered over Ethernet but over register-based MMIO. + Flow control over the CPU port is functional in this mode. When using + this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for + use with tc-flower. + +config NET_DSA_TAG_QCA + tristate "Tag driver for Qualcomm Atheros QCA8K switches" + help + Say Y or M if you want to enable support for tagging frames for + the Qualcomm Atheros QCA8K switches. + +config NET_DSA_TAG_RTL4_A + tristate "Tag driver for Realtek 4 byte protocol A tags" + help + Say Y or M if you want to enable support for tagging frames for the + Realtek switches with 4 byte protocol A tags, sich as found in + the Realtek RTL8366RB. + +config NET_DSA_TAG_RTL8_4 + tristate "Tag driver for Realtek 8 byte protocol 4 tags" + help + Say Y or M if you want to enable support for tagging frames for Realtek + switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC. + +config NET_DSA_TAG_RZN1_A5PSW + tristate "Tag driver for Renesas RZ/N1 A5PSW switch" + help + Say Y or M if you want to enable support for tagging frames for + Renesas RZ/N1 embedded switch that uses an 8 byte tag located after + destination MAC address. + +config NET_DSA_TAG_LAN9303 + tristate "Tag driver for SMSC/Microchip LAN9303 family of switches" + help + Say Y or M if you want to enable support for tagging frames for the + SMSC/Microchip LAN9303 family of switches. + +config NET_DSA_TAG_SJA1105 + tristate "Tag driver for NXP SJA1105 switches" + select PACKING + help + Say Y or M if you want to enable support for tagging frames with the + NXP SJA1105 switch family. Both the native tagging protocol (which + is only for link-local traffic) as well as non-native tagging (based + on a custom 802.1Q VLAN header) are available. + +config NET_DSA_TAG_TRAILER + tristate "Tag driver for switches using a trailer tag" + help + Say Y or M if you want to enable support for tagging frames at + with a trailed. e.g. Marvell 88E6060. + +config NET_DSA_TAG_XRS700X + tristate "Tag driver for XRS700x switches" + help + Say Y or M if you want to enable support for tagging frames for + Arrow SpeedChips XRS700x switches that use a single byte tag trailer. + +endif -- cgit v1.2.3