From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/dsa/tag_8021q.c | 524 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 524 insertions(+) create mode 100644 net/dsa/tag_8021q.c (limited to 'net/dsa/tag_8021q.c') diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c new file mode 100644 index 000000000..5ee9ef009 --- /dev/null +++ b/net/dsa/tag_8021q.c @@ -0,0 +1,524 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Vladimir Oltean + * + * This module is not a complete tagger implementation. It only provides + * primitives for taggers that rely on 802.1Q VLAN tags to use. + */ +#include +#include + +#include "port.h" +#include "switch.h" +#include "tag.h" +#include "tag_8021q.h" + +/* Binary structure of the fake 12-bit VID field (when the TPID is + * ETH_P_DSA_8021Q): + * + * | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | + * +-----------+-----+-----------------+-----------+-----------------------+ + * | RSV | VBID| SWITCH_ID | VBID | PORT | + * +-----------+-----+-----------------+-----------+-----------------------+ + * + * RSV - VID[11:10]: + * Reserved. Must be set to 3 (0b11). + * + * SWITCH_ID - VID[8:6]: + * Index of switch within DSA tree. Must be between 0 and 7. + * + * VBID - { VID[9], VID[5:4] }: + * Virtual bridge ID. If between 1 and 7, packet targets the broadcast + * domain of a bridge. If transmitted as zero, packet targets a single + * port. + * + * PORT - VID[3:0]: + * Index of switch port. Must be between 0 and 15. + */ + +#define DSA_8021Q_RSV_VAL 3 +#define DSA_8021Q_RSV_SHIFT 10 +#define DSA_8021Q_RSV_MASK GENMASK(11, 10) +#define DSA_8021Q_RSV ((DSA_8021Q_RSV_VAL << DSA_8021Q_RSV_SHIFT) & \ + DSA_8021Q_RSV_MASK) + +#define DSA_8021Q_SWITCH_ID_SHIFT 6 +#define DSA_8021Q_SWITCH_ID_MASK GENMASK(8, 6) +#define DSA_8021Q_SWITCH_ID(x) (((x) << DSA_8021Q_SWITCH_ID_SHIFT) & \ + DSA_8021Q_SWITCH_ID_MASK) + +#define DSA_8021Q_VBID_HI_SHIFT 9 +#define DSA_8021Q_VBID_HI_MASK GENMASK(9, 9) +#define DSA_8021Q_VBID_LO_SHIFT 4 +#define DSA_8021Q_VBID_LO_MASK GENMASK(5, 4) +#define DSA_8021Q_VBID_HI(x) (((x) & GENMASK(2, 2)) >> 2) +#define DSA_8021Q_VBID_LO(x) ((x) & GENMASK(1, 0)) +#define DSA_8021Q_VBID(x) \ + (((DSA_8021Q_VBID_LO(x) << DSA_8021Q_VBID_LO_SHIFT) & \ + DSA_8021Q_VBID_LO_MASK) | \ + ((DSA_8021Q_VBID_HI(x) << DSA_8021Q_VBID_HI_SHIFT) & \ + DSA_8021Q_VBID_HI_MASK)) + +#define DSA_8021Q_PORT_SHIFT 0 +#define DSA_8021Q_PORT_MASK GENMASK(3, 0) +#define DSA_8021Q_PORT(x) (((x) << DSA_8021Q_PORT_SHIFT) & \ + DSA_8021Q_PORT_MASK) + +struct dsa_tag_8021q_vlan { + struct list_head list; + int port; + u16 vid; + refcount_t refcount; +}; + +struct dsa_8021q_context { + struct dsa_switch *ds; + struct list_head vlans; + /* EtherType of RX VID, used for filtering on master interface */ + __be16 proto; +}; + +u16 dsa_tag_8021q_bridge_vid(unsigned int bridge_num) +{ + /* The VBID value of 0 is reserved for precise TX, but it is also + * reserved/invalid for the bridge_num, so all is well. + */ + return DSA_8021Q_RSV | DSA_8021Q_VBID(bridge_num); +} +EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_vid); + +/* Returns the VID that will be installed as pvid for this switch port, sent as + * tagged egress towards the CPU port and decoded by the rcv function. + */ +u16 dsa_tag_8021q_standalone_vid(const struct dsa_port *dp) +{ + return DSA_8021Q_RSV | DSA_8021Q_SWITCH_ID(dp->ds->index) | + DSA_8021Q_PORT(dp->index); +} +EXPORT_SYMBOL_GPL(dsa_tag_8021q_standalone_vid); + +/* Returns the decoded switch ID from the RX VID. */ +int dsa_8021q_rx_switch_id(u16 vid) +{ + return (vid & DSA_8021Q_SWITCH_ID_MASK) >> DSA_8021Q_SWITCH_ID_SHIFT; +} +EXPORT_SYMBOL_GPL(dsa_8021q_rx_switch_id); + +/* Returns the decoded port ID from the RX VID. */ +int dsa_8021q_rx_source_port(u16 vid) +{ + return (vid & DSA_8021Q_PORT_MASK) >> DSA_8021Q_PORT_SHIFT; +} +EXPORT_SYMBOL_GPL(dsa_8021q_rx_source_port); + +/* Returns the decoded VBID from the RX VID. */ +static int dsa_tag_8021q_rx_vbid(u16 vid) +{ + u16 vbid_hi = (vid & DSA_8021Q_VBID_HI_MASK) >> DSA_8021Q_VBID_HI_SHIFT; + u16 vbid_lo = (vid & DSA_8021Q_VBID_LO_MASK) >> DSA_8021Q_VBID_LO_SHIFT; + + return (vbid_hi << 2) | vbid_lo; +} + +bool vid_is_dsa_8021q(u16 vid) +{ + u16 rsv = (vid & DSA_8021Q_RSV_MASK) >> DSA_8021Q_RSV_SHIFT; + + return rsv == DSA_8021Q_RSV_VAL; +} +EXPORT_SYMBOL_GPL(vid_is_dsa_8021q); + +static struct dsa_tag_8021q_vlan * +dsa_tag_8021q_vlan_find(struct dsa_8021q_context *ctx, int port, u16 vid) +{ + struct dsa_tag_8021q_vlan *v; + + list_for_each_entry(v, &ctx->vlans, list) + if (v->vid == vid && v->port == port) + return v; + + return NULL; +} + +static int dsa_port_do_tag_8021q_vlan_add(struct dsa_port *dp, u16 vid, + u16 flags) +{ + struct dsa_8021q_context *ctx = dp->ds->tag_8021q_ctx; + struct dsa_switch *ds = dp->ds; + struct dsa_tag_8021q_vlan *v; + int port = dp->index; + int err; + + /* No need to bother with refcounting for user ports */ + if (!(dsa_port_is_cpu(dp) || dsa_port_is_dsa(dp))) + return ds->ops->tag_8021q_vlan_add(ds, port, vid, flags); + + v = dsa_tag_8021q_vlan_find(ctx, port, vid); + if (v) { + refcount_inc(&v->refcount); + return 0; + } + + v = kzalloc(sizeof(*v), GFP_KERNEL); + if (!v) + return -ENOMEM; + + err = ds->ops->tag_8021q_vlan_add(ds, port, vid, flags); + if (err) { + kfree(v); + return err; + } + + v->vid = vid; + v->port = port; + refcount_set(&v->refcount, 1); + list_add_tail(&v->list, &ctx->vlans); + + return 0; +} + +static int dsa_port_do_tag_8021q_vlan_del(struct dsa_port *dp, u16 vid) +{ + struct dsa_8021q_context *ctx = dp->ds->tag_8021q_ctx; + struct dsa_switch *ds = dp->ds; + struct dsa_tag_8021q_vlan *v; + int port = dp->index; + int err; + + /* No need to bother with refcounting for user ports */ + if (!(dsa_port_is_cpu(dp) || dsa_port_is_dsa(dp))) + return ds->ops->tag_8021q_vlan_del(ds, port, vid); + + v = dsa_tag_8021q_vlan_find(ctx, port, vid); + if (!v) + return -ENOENT; + + if (!refcount_dec_and_test(&v->refcount)) + return 0; + + err = ds->ops->tag_8021q_vlan_del(ds, port, vid); + if (err) { + refcount_inc(&v->refcount); + return err; + } + + list_del(&v->list); + kfree(v); + + return 0; +} + +static bool +dsa_port_tag_8021q_vlan_match(struct dsa_port *dp, + struct dsa_notifier_tag_8021q_vlan_info *info) +{ + return dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp) || dp == info->dp; +} + +int dsa_switch_tag_8021q_vlan_add(struct dsa_switch *ds, + struct dsa_notifier_tag_8021q_vlan_info *info) +{ + struct dsa_port *dp; + int err; + + /* Since we use dsa_broadcast(), there might be other switches in other + * trees which don't support tag_8021q, so don't return an error. + * Or they might even support tag_8021q but have not registered yet to + * use it (maybe they use another tagger currently). + */ + if (!ds->ops->tag_8021q_vlan_add || !ds->tag_8021q_ctx) + return 0; + + dsa_switch_for_each_port(dp, ds) { + if (dsa_port_tag_8021q_vlan_match(dp, info)) { + u16 flags = 0; + + if (dsa_port_is_user(dp)) + flags |= BRIDGE_VLAN_INFO_UNTAGGED | + BRIDGE_VLAN_INFO_PVID; + + err = dsa_port_do_tag_8021q_vlan_add(dp, info->vid, + flags); + if (err) + return err; + } + } + + return 0; +} + +int dsa_switch_tag_8021q_vlan_del(struct dsa_switch *ds, + struct dsa_notifier_tag_8021q_vlan_info *info) +{ + struct dsa_port *dp; + int err; + + if (!ds->ops->tag_8021q_vlan_del || !ds->tag_8021q_ctx) + return 0; + + dsa_switch_for_each_port(dp, ds) { + if (dsa_port_tag_8021q_vlan_match(dp, info)) { + err = dsa_port_do_tag_8021q_vlan_del(dp, info->vid); + if (err) + return err; + } + } + + return 0; +} + +/* There are 2 ways of offloading tag_8021q VLANs. + * + * One is to use a hardware TCAM to push the port's standalone VLAN into the + * frame when forwarding it to the CPU, as an egress modification rule on the + * CPU port. This is preferable because it has no side effects for the + * autonomous forwarding path, and accomplishes tag_8021q's primary goal of + * identifying the source port of each packet based on VLAN ID. + * + * The other is to commit the tag_8021q VLAN as a PVID to the VLAN table, and + * to configure the port as VLAN-unaware. This is less preferable because + * unique source port identification can only be done for standalone ports; + * under a VLAN-unaware bridge, all ports share the same tag_8021q VLAN as + * PVID, and under a VLAN-aware bridge, packets received by software will not + * have tag_8021q VLANs appended, just bridge VLANs. + * + * For tag_8021q implementations of the second type, this method is used to + * replace the standalone tag_8021q VLAN of a port with the tag_8021q VLAN to + * be used for VLAN-unaware bridging. + */ +int dsa_tag_8021q_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + u16 standalone_vid, bridge_vid; + int err; + + /* Delete the standalone VLAN of the port and replace it with a + * bridging VLAN + */ + standalone_vid = dsa_tag_8021q_standalone_vid(dp); + bridge_vid = dsa_tag_8021q_bridge_vid(bridge.num); + + err = dsa_port_tag_8021q_vlan_add(dp, bridge_vid, true); + if (err) + return err; + + dsa_port_tag_8021q_vlan_del(dp, standalone_vid, false); + + return 0; +} +EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_join); + +void dsa_tag_8021q_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + struct dsa_port *dp = dsa_to_port(ds, port); + u16 standalone_vid, bridge_vid; + int err; + + /* Delete the bridging VLAN of the port and replace it with a + * standalone VLAN + */ + standalone_vid = dsa_tag_8021q_standalone_vid(dp); + bridge_vid = dsa_tag_8021q_bridge_vid(bridge.num); + + err = dsa_port_tag_8021q_vlan_add(dp, standalone_vid, false); + if (err) { + dev_err(ds->dev, + "Failed to delete tag_8021q standalone VLAN %d from port %d: %pe\n", + standalone_vid, port, ERR_PTR(err)); + } + + dsa_port_tag_8021q_vlan_del(dp, bridge_vid, true); +} +EXPORT_SYMBOL_GPL(dsa_tag_8021q_bridge_leave); + +/* Set up a port's standalone tag_8021q VLAN */ +static int dsa_tag_8021q_port_setup(struct dsa_switch *ds, int port) +{ + struct dsa_8021q_context *ctx = ds->tag_8021q_ctx; + struct dsa_port *dp = dsa_to_port(ds, port); + u16 vid = dsa_tag_8021q_standalone_vid(dp); + struct net_device *master; + int err; + + /* The CPU port is implicitly configured by + * configuring the front-panel ports + */ + if (!dsa_port_is_user(dp)) + return 0; + + master = dsa_port_to_master(dp); + + err = dsa_port_tag_8021q_vlan_add(dp, vid, false); + if (err) { + dev_err(ds->dev, + "Failed to apply standalone VID %d to port %d: %pe\n", + vid, port, ERR_PTR(err)); + return err; + } + + /* Add the VLAN to the master's RX filter. */ + vlan_vid_add(master, ctx->proto, vid); + + return err; +} + +static void dsa_tag_8021q_port_teardown(struct dsa_switch *ds, int port) +{ + struct dsa_8021q_context *ctx = ds->tag_8021q_ctx; + struct dsa_port *dp = dsa_to_port(ds, port); + u16 vid = dsa_tag_8021q_standalone_vid(dp); + struct net_device *master; + + /* The CPU port is implicitly configured by + * configuring the front-panel ports + */ + if (!dsa_port_is_user(dp)) + return; + + master = dsa_port_to_master(dp); + + dsa_port_tag_8021q_vlan_del(dp, vid, false); + + vlan_vid_del(master, ctx->proto, vid); +} + +static int dsa_tag_8021q_setup(struct dsa_switch *ds) +{ + int err, port; + + ASSERT_RTNL(); + + for (port = 0; port < ds->num_ports; port++) { + err = dsa_tag_8021q_port_setup(ds, port); + if (err < 0) { + dev_err(ds->dev, + "Failed to setup VLAN tagging for port %d: %pe\n", + port, ERR_PTR(err)); + return err; + } + } + + return 0; +} + +static void dsa_tag_8021q_teardown(struct dsa_switch *ds) +{ + int port; + + ASSERT_RTNL(); + + for (port = 0; port < ds->num_ports; port++) + dsa_tag_8021q_port_teardown(ds, port); +} + +int dsa_tag_8021q_register(struct dsa_switch *ds, __be16 proto) +{ + struct dsa_8021q_context *ctx; + int err; + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->proto = proto; + ctx->ds = ds; + + INIT_LIST_HEAD(&ctx->vlans); + + ds->tag_8021q_ctx = ctx; + + err = dsa_tag_8021q_setup(ds); + if (err) + goto err_free; + + return 0; + +err_free: + kfree(ctx); + return err; +} +EXPORT_SYMBOL_GPL(dsa_tag_8021q_register); + +void dsa_tag_8021q_unregister(struct dsa_switch *ds) +{ + struct dsa_8021q_context *ctx = ds->tag_8021q_ctx; + struct dsa_tag_8021q_vlan *v, *n; + + dsa_tag_8021q_teardown(ds); + + list_for_each_entry_safe(v, n, &ctx->vlans, list) { + list_del(&v->list); + kfree(v); + } + + ds->tag_8021q_ctx = NULL; + + kfree(ctx); +} +EXPORT_SYMBOL_GPL(dsa_tag_8021q_unregister); + +struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev, + u16 tpid, u16 tci) +{ + /* skb->data points at skb_mac_header, which + * is fine for vlan_insert_tag. + */ + return vlan_insert_tag(skb, htons(tpid), tci); +} +EXPORT_SYMBOL_GPL(dsa_8021q_xmit); + +struct net_device *dsa_tag_8021q_find_port_by_vbid(struct net_device *master, + int vbid) +{ + struct dsa_port *cpu_dp = master->dsa_ptr; + struct dsa_switch_tree *dst = cpu_dp->dst; + struct dsa_port *dp; + + if (WARN_ON(!vbid)) + return NULL; + + dsa_tree_for_each_user_port(dp, dst) { + if (!dp->bridge) + continue; + + if (dp->stp_state != BR_STATE_LEARNING && + dp->stp_state != BR_STATE_FORWARDING) + continue; + + if (dp->cpu_dp != cpu_dp) + continue; + + if (dsa_port_bridge_num_get(dp) == vbid) + return dp->slave; + } + + return NULL; +} +EXPORT_SYMBOL_GPL(dsa_tag_8021q_find_port_by_vbid); + +void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id, + int *vbid) +{ + u16 vid, tci; + + if (skb_vlan_tag_present(skb)) { + tci = skb_vlan_tag_get(skb); + __vlan_hwaccel_clear_tag(skb); + } else { + skb_push_rcsum(skb, ETH_HLEN); + __skb_vlan_pop(skb, &tci); + skb_pull_rcsum(skb, ETH_HLEN); + } + + vid = tci & VLAN_VID_MASK; + + *source_port = dsa_8021q_rx_source_port(vid); + *switch_id = dsa_8021q_rx_switch_id(vid); + + if (vbid) + *vbid = dsa_tag_8021q_rx_vbid(vid); + + skb->priority = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT; +} +EXPORT_SYMBOL_GPL(dsa_8021q_rcv); -- cgit v1.2.3