From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/ipv6/Kconfig | 343 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 343 insertions(+) create mode 100644 net/ipv6/Kconfig (limited to 'net/ipv6/Kconfig') diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig new file mode 100644 index 000000000..658bfed1d --- /dev/null +++ b/net/ipv6/Kconfig @@ -0,0 +1,343 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# IPv6 configuration +# + +# IPv6 as module will cause a CRASH if you try to unload it +menuconfig IPV6 + tristate "The IPv6 protocol" + default y + select CRYPTO_LIB_SHA1 + help + Support for IP version 6 (IPv6). + + For general information about IPv6, see + . + For specific information about IPv6 under Linux, see + Documentation/networking/ipv6.rst and read the HOWTO at + + + To compile this protocol support as a module, choose M here: the + module will be called ipv6. + +if IPV6 + +config IPV6_ROUTER_PREF + bool "IPv6: Router Preference (RFC 4191) support" + help + Router Preference is an optional extension to the Router + Advertisement message which improves the ability of hosts + to pick an appropriate router, especially when the hosts + are placed in a multi-homed network. + + If unsure, say N. + +config IPV6_ROUTE_INFO + bool "IPv6: Route Information (RFC 4191) support" + depends on IPV6_ROUTER_PREF + help + Support of Route Information. + + If unsure, say N. + +config IPV6_OPTIMISTIC_DAD + bool "IPv6: Enable RFC 4429 Optimistic DAD" + help + Support for optimistic Duplicate Address Detection. It allows for + autoconfigured addresses to be used more quickly. + + If unsure, say N. + +config INET6_AH + tristate "IPv6: AH transformation" + select XFRM_AH + help + Support for IPsec AH (Authentication Header). + + AH can be used with various authentication algorithms. Besides + enabling AH support itself, this option enables the generic + implementations of the algorithms that RFC 8221 lists as MUST be + implemented. If you need any other algorithms, you'll need to enable + them in the crypto API. You should also enable accelerated + implementations of any needed algorithms when available. + + If unsure, say Y. + +config INET6_ESP + tristate "IPv6: ESP transformation" + select XFRM_ESP + help + Support for IPsec ESP (Encapsulating Security Payload). + + ESP can be used with various encryption and authentication algorithms. + Besides enabling ESP support itself, this option enables the generic + implementations of the algorithms that RFC 8221 lists as MUST be + implemented. If you need any other algorithms, you'll need to enable + them in the crypto API. You should also enable accelerated + implementations of any needed algorithms when available. + + If unsure, say Y. + +config INET6_ESP_OFFLOAD + tristate "IPv6: ESP transformation offload" + depends on INET6_ESP + select XFRM_OFFLOAD + default n + help + Support for ESP transformation offload. This makes sense + only if this system really does IPsec and want to do it + with high throughput. A typical desktop system does not + need it, even if it does IPsec. + + If unsure, say N. + +config INET6_ESPINTCP + bool "IPv6: ESP in TCP encapsulation (RFC 8229)" + depends on XFRM && INET6_ESP + select STREAM_PARSER + select NET_SOCK_MSG + select XFRM_ESPINTCP + help + Support for RFC 8229 encapsulation of ESP and IKE over + TCP/IPv6 sockets. + + If unsure, say N. + +config INET6_IPCOMP + tristate "IPv6: IPComp transformation" + select INET6_XFRM_TUNNEL + select XFRM_IPCOMP + help + Support for IP Payload Compression Protocol (IPComp) (RFC3173), + typically needed for IPsec. + + If unsure, say Y. + +config IPV6_MIP6 + tristate "IPv6: Mobility" + select XFRM + help + Support for IPv6 Mobility described in RFC 3775. + + If unsure, say N. + +config IPV6_ILA + tristate "IPv6: Identifier Locator Addressing (ILA)" + depends on NETFILTER + select DST_CACHE + select LWTUNNEL + help + Support for IPv6 Identifier Locator Addressing (ILA). + + ILA is a mechanism to do network virtualization without + encapsulation. The basic concept of ILA is that we split an + IPv6 address into a 64 bit locator and 64 bit identifier. The + identifier is the identity of an entity in communication + ("who") and the locator expresses the location of the + entity ("where"). + + ILA can be configured using the "encap ila" option with + "ip -6 route" command. ILA is described in + https://tools.ietf.org/html/draft-herbert-nvo3-ila-00. + + If unsure, say N. + +config INET6_XFRM_TUNNEL + tristate + select INET6_TUNNEL + default n + +config INET6_TUNNEL + tristate + default n + +config IPV6_VTI +tristate "Virtual (secure) IPv6: tunneling" + select IPV6_TUNNEL + select NET_IP_TUNNEL + select XFRM + help + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This can be used with xfrm mode tunnel to give + the notion of a secure tunnel for IPSEC and then use routing protocol + on top. + +config IPV6_SIT + tristate "IPv6: IPv6-in-IPv4 tunnel (SIT driver)" + select INET_TUNNEL + select NET_IP_TUNNEL + select IPV6_NDISC_NODETYPE + default y + help + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This driver implements encapsulation of IPv6 + into IPv4 packets. This is useful if you want to connect two IPv6 + networks over an IPv4-only path. + + Saying M here will produce a module called sit. If unsure, say Y. + +config IPV6_SIT_6RD + bool "IPv6: IPv6 Rapid Deployment (6RD)" + depends on IPV6_SIT + default n + help + IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon + mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly + deploy IPv6 unicast service to IPv4 sites to which it provides + customer premise equipment. Like 6to4, it utilizes stateless IPv6 in + IPv4 encapsulation in order to transit IPv4-only network + infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 + prefix of its own in place of the fixed 6to4 prefix. + + With this option enabled, the SIT driver offers 6rd functionality by + providing additional ioctl API to configure the IPv6 Prefix for in + stead of static 2002::/16 for 6to4. + + If unsure, say N. + +config IPV6_NDISC_NODETYPE + bool + +config IPV6_TUNNEL + tristate "IPv6: IP-in-IPv6 tunnel (RFC2473)" + select INET6_TUNNEL + select DST_CACHE + select GRO_CELLS + help + Support for IPv6-in-IPv6 and IPv4-in-IPv6 tunnels described in + RFC 2473. + + If unsure, say N. + +config IPV6_GRE + tristate "IPv6: GRE tunnel" + select IPV6_TUNNEL + select NET_IP_TUNNEL + depends on NET_IPGRE_DEMUX + help + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This particular tunneling driver implements + GRE (Generic Routing Encapsulation) and at this time allows + encapsulating of IPv4 or IPv6 over existing IPv6 infrastructure. + This driver is useful if the other endpoint is a Cisco router: Cisco + likes GRE much better than the other Linux tunneling driver ("IP + tunneling" above). In addition, GRE allows multicast redistribution + through the tunnel. + + Saying M here will produce a module called ip6_gre. If unsure, say N. + +config IPV6_FOU + tristate + default NET_FOU && IPV6 + +config IPV6_FOU_TUNNEL + tristate + default NET_FOU_IP_TUNNELS && IPV6_FOU + select IPV6_TUNNEL + +config IPV6_MULTIPLE_TABLES + bool "IPv6: Multiple Routing Tables" + select FIB_RULES + help + Support multiple routing tables. + +config IPV6_SUBTREES + bool "IPv6: source address based routing" + depends on IPV6_MULTIPLE_TABLES + help + Enable routing by source address or prefix. + + The destination address is still the primary routing key, so mixing + normal and source prefix specific routes in the same routing table + may sometimes lead to unintended routing behavior. This can be + avoided by defining different routing tables for the normal and + source prefix specific routes. + + If unsure, say N. + +config IPV6_MROUTE + bool "IPv6: multicast routing" + depends on IPV6 + select IP_MROUTE_COMMON + help + Support for IPv6 multicast forwarding. + If unsure, say N. + +config IPV6_MROUTE_MULTIPLE_TABLES + bool "IPv6: multicast policy routing" + depends on IPV6_MROUTE + select FIB_RULES + help + Normally, a multicast router runs a userspace daemon and decides + what to do with a multicast packet based on the source and + destination addresses. If you say Y here, the multicast router + will also be able to take interfaces and packet marks into + account and run multiple instances of userspace daemons + simultaneously, each one handling a single table. + + If unsure, say N. + +config IPV6_PIMSM_V2 + bool "IPv6: PIM-SM version 2 support" + depends on IPV6_MROUTE + help + Support for IPv6 PIM multicast routing protocol PIM-SMv2. + If unsure, say N. + +config IPV6_SEG6_LWTUNNEL + bool "IPv6: Segment Routing Header encapsulation support" + depends on IPV6 + select LWTUNNEL + select DST_CACHE + select IPV6_MULTIPLE_TABLES + help + Support for encapsulation of packets within an outer IPv6 + header and a Segment Routing Header using the lightweight + tunnels mechanism. Also enable support for advanced local + processing of SRv6 packets based on their active segment. + + If unsure, say N. + +config IPV6_SEG6_HMAC + bool "IPv6: Segment Routing HMAC support" + depends on IPV6 + select CRYPTO + select CRYPTO_HMAC + select CRYPTO_SHA1 + select CRYPTO_SHA256 + help + Support for HMAC signature generation and verification + of SR-enabled packets. + + If unsure, say N. + +config IPV6_SEG6_BPF + def_bool y + depends on IPV6_SEG6_LWTUNNEL + depends on IPV6 = y + +config IPV6_RPL_LWTUNNEL + bool "IPv6: RPL Source Routing Header support" + depends on IPV6 + select LWTUNNEL + help + Support for RFC6554 RPL Source Routing Header using the lightweight + tunnels mechanism. + + If unsure, say N. + +config IPV6_IOAM6_LWTUNNEL + bool "IPv6: IOAM Pre-allocated Trace insertion support" + depends on IPV6 + select LWTUNNEL + select DST_CACHE + help + Support for the insertion of IOAM Pre-allocated Trace + Header using the lightweight tunnels mechanism. + + If unsure, say N. + +endif # IPV6 -- cgit v1.2.3