From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/mac80211/spectmgmt.c | 249 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 net/mac80211/spectmgmt.c (limited to 'net/mac80211/spectmgmt.c') diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c new file mode 100644 index 000000000..871cdac2d --- /dev/null +++ b/net/mac80211/spectmgmt.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * spectrum management + * + * Copyright 2003, Jouni Malinen + * Copyright 2002-2005, Instant802 Networks, Inc. + * Copyright 2005-2006, Devicescape Software, Inc. + * Copyright 2006-2007 Jiri Benc + * Copyright 2007, Michael Wu + * Copyright 2007-2008, Intel Corporation + * Copyright 2008, Johannes Berg + * Copyright (C) 2018, 2020, 2022 Intel Corporation + */ + +#include +#include +#include +#include "ieee80211_i.h" +#include "sta_info.h" +#include "wme.h" + +int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, + struct ieee802_11_elems *elems, + enum nl80211_band current_band, + u32 vht_cap_info, + ieee80211_conn_flags_t conn_flags, u8 *bssid, + struct ieee80211_csa_ie *csa_ie) +{ + enum nl80211_band new_band = current_band; + int new_freq; + u8 new_chan_no; + struct ieee80211_channel *new_chan; + struct cfg80211_chan_def new_vht_chandef = {}; + const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; + const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; + int secondary_channel_offset = -1; + + memset(csa_ie, 0, sizeof(*csa_ie)); + + sec_chan_offs = elems->sec_chan_offs; + wide_bw_chansw_ie = elems->wide_bw_chansw_ie; + + if (conn_flags & (IEEE80211_CONN_DISABLE_HT | + IEEE80211_CONN_DISABLE_40MHZ)) { + sec_chan_offs = NULL; + wide_bw_chansw_ie = NULL; + } + + if (conn_flags & IEEE80211_CONN_DISABLE_VHT) + wide_bw_chansw_ie = NULL; + + if (elems->ext_chansw_ie) { + if (!ieee80211_operating_class_to_band( + elems->ext_chansw_ie->new_operating_class, + &new_band)) { + sdata_info(sdata, + "cannot understand ECSA IE operating class, %d, ignoring\n", + elems->ext_chansw_ie->new_operating_class); + } + new_chan_no = elems->ext_chansw_ie->new_ch_num; + csa_ie->count = elems->ext_chansw_ie->count; + csa_ie->mode = elems->ext_chansw_ie->mode; + } else if (elems->ch_switch_ie) { + new_chan_no = elems->ch_switch_ie->new_ch_num; + csa_ie->count = elems->ch_switch_ie->count; + csa_ie->mode = elems->ch_switch_ie->mode; + } else { + /* nothing here we understand */ + return 1; + } + + /* Mesh Channel Switch Parameters Element */ + if (elems->mesh_chansw_params_ie) { + csa_ie->ttl = elems->mesh_chansw_params_ie->mesh_ttl; + csa_ie->mode = elems->mesh_chansw_params_ie->mesh_flags; + csa_ie->pre_value = le16_to_cpu( + elems->mesh_chansw_params_ie->mesh_pre_value); + + if (elems->mesh_chansw_params_ie->mesh_flags & + WLAN_EID_CHAN_SWITCH_PARAM_REASON) + csa_ie->reason_code = le16_to_cpu( + elems->mesh_chansw_params_ie->mesh_reason); + } + + new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); + new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); + if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) { + sdata_info(sdata, + "BSS %pM switches to unsupported channel (%d MHz), disconnecting\n", + bssid, new_freq); + return -EINVAL; + } + + if (sec_chan_offs) { + secondary_channel_offset = sec_chan_offs->sec_chan_offs; + } else if (!(conn_flags & IEEE80211_CONN_DISABLE_HT)) { + /* If the secondary channel offset IE is not present, + * we can't know what's the post-CSA offset, so the + * best we can do is use 20MHz. + */ + secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + } + + switch (secondary_channel_offset) { + default: + /* secondary_channel_offset was present but is invalid */ + case IEEE80211_HT_PARAM_CHA_SEC_NONE: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_HT20); + break; + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_HT40PLUS); + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_HT40MINUS); + break; + case -1: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_NO_HT); + /* keep width for 5/10 MHz channels */ + switch (sdata->vif.bss_conf.chandef.width) { + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + csa_ie->chandef.width = + sdata->vif.bss_conf.chandef.width; + break; + default: + break; + } + break; + } + + if (wide_bw_chansw_ie) { + u8 new_seg1 = wide_bw_chansw_ie->new_center_freq_seg1; + struct ieee80211_vht_operation vht_oper = { + .chan_width = + wide_bw_chansw_ie->new_channel_width, + .center_freq_seg0_idx = + wide_bw_chansw_ie->new_center_freq_seg0, + .center_freq_seg1_idx = new_seg1, + /* .basic_mcs_set doesn't matter */ + }; + struct ieee80211_ht_operation ht_oper = { + .operation_mode = + cpu_to_le16(new_seg1 << + IEEE80211_HT_OP_MODE_CCFS2_SHIFT), + }; + + /* default, for the case of IEEE80211_VHT_CHANWIDTH_USE_HT, + * to the previously parsed chandef + */ + new_vht_chandef = csa_ie->chandef; + + /* ignore if parsing fails */ + if (!ieee80211_chandef_vht_oper(&sdata->local->hw, + vht_cap_info, + &vht_oper, &ht_oper, + &new_vht_chandef)) + new_vht_chandef.chan = NULL; + + if (conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80) + ieee80211_chandef_downgrade(&new_vht_chandef); + if (conn_flags & IEEE80211_CONN_DISABLE_160MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_160) + ieee80211_chandef_downgrade(&new_vht_chandef); + } + + /* if VHT data is there validate & use it */ + if (new_vht_chandef.chan) { + if (!cfg80211_chandef_compatible(&new_vht_chandef, + &csa_ie->chandef)) { + sdata_info(sdata, + "BSS %pM: CSA has inconsistent channel data, disconnecting\n", + bssid); + return -EINVAL; + } + csa_ie->chandef = new_vht_chandef; + } + + if (elems->max_channel_switch_time) + csa_ie->max_switch_time = + (elems->max_channel_switch_time[0] << 0) | + (elems->max_channel_switch_time[1] << 8) | + (elems->max_channel_switch_time[2] << 16); + + return 0; +} + +static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata, + struct ieee80211_msrment_ie *request_ie, + const u8 *da, const u8 *bssid, + u8 dialog_token) +{ + struct ieee80211_local *local = sdata->local; + struct sk_buff *skb; + struct ieee80211_mgmt *msr_report; + + skb = dev_alloc_skb(sizeof(*msr_report) + local->hw.extra_tx_headroom + + sizeof(struct ieee80211_msrment_ie)); + if (!skb) + return; + + skb_reserve(skb, local->hw.extra_tx_headroom); + msr_report = skb_put_zero(skb, 24); + memcpy(msr_report->da, da, ETH_ALEN); + memcpy(msr_report->sa, sdata->vif.addr, ETH_ALEN); + memcpy(msr_report->bssid, bssid, ETH_ALEN); + msr_report->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ACTION); + + skb_put(skb, 1 + sizeof(msr_report->u.action.u.measurement)); + msr_report->u.action.category = WLAN_CATEGORY_SPECTRUM_MGMT; + msr_report->u.action.u.measurement.action_code = + WLAN_ACTION_SPCT_MSR_RPRT; + msr_report->u.action.u.measurement.dialog_token = dialog_token; + + msr_report->u.action.u.measurement.element_id = WLAN_EID_MEASURE_REPORT; + msr_report->u.action.u.measurement.length = + sizeof(struct ieee80211_msrment_ie); + + memset(&msr_report->u.action.u.measurement.msr_elem, 0, + sizeof(struct ieee80211_msrment_ie)); + msr_report->u.action.u.measurement.msr_elem.token = request_ie->token; + msr_report->u.action.u.measurement.msr_elem.mode |= + IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED; + msr_report->u.action.u.measurement.msr_elem.type = request_ie->type; + + ieee80211_tx_skb(sdata, skb); +} + +void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, + size_t len) +{ + /* + * Ignoring measurement request is spec violation. + * Mandatory measurements must be reported optional + * measurements might be refused or reported incapable + * For now just refuse + * TODO: Answer basic measurement as unmeasured + */ + ieee80211_send_refuse_measurement_request(sdata, + &mgmt->u.action.u.measurement.msr_elem, + mgmt->sa, mgmt->bssid, + mgmt->u.action.u.measurement.dialog_token); +} -- cgit v1.2.3