From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/mac80211/wme.c | 244 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 244 insertions(+) create mode 100644 net/mac80211/wme.c (limited to 'net/mac80211/wme.c') diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c new file mode 100644 index 000000000..a12c63638 --- /dev/null +++ b/net/mac80211/wme.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2004, Instant802 Networks, Inc. + * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright (C) 2022 Intel Corporation + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include "ieee80211_i.h" +#include "wme.h" + +/* Default mapping in classifier to work with default + * queue setup. + */ +const int ieee802_1d_to_ac[8] = { + IEEE80211_AC_BE, + IEEE80211_AC_BK, + IEEE80211_AC_BK, + IEEE80211_AC_BE, + IEEE80211_AC_VI, + IEEE80211_AC_VI, + IEEE80211_AC_VO, + IEEE80211_AC_VO +}; + +static int wme_downgrade_ac(struct sk_buff *skb) +{ + switch (skb->priority) { + case 6: + case 7: + skb->priority = 5; /* VO -> VI */ + return 0; + case 4: + case 5: + skb->priority = 3; /* VI -> BE */ + return 0; + case 0: + case 3: + skb->priority = 2; /* BE -> BK */ + return 0; + default: + return -1; + } +} + +/** + * ieee80211_fix_reserved_tid - return the TID to use if this one is reserved + * @tid: the assumed-reserved TID + * + * Returns: the alternative TID to use, or 0 on error + */ +static inline u8 ieee80211_fix_reserved_tid(u8 tid) +{ + switch (tid) { + case 0: + return 3; + case 1: + return 2; + case 2: + return 1; + case 3: + return 0; + case 4: + return 5; + case 5: + return 4; + case 6: + return 7; + case 7: + return 6; + } + + return 0; +} + +static u16 ieee80211_downgrade_queue(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, struct sk_buff *skb) +{ + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + + /* in case we are a client verify acm is not set for this ac */ + while (sdata->wmm_acm & BIT(skb->priority)) { + int ac = ieee802_1d_to_ac[skb->priority]; + + if (ifmgd->tx_tspec[ac].admitted_time && + skb->priority == ifmgd->tx_tspec[ac].up) + return ac; + + if (wme_downgrade_ac(skb)) { + /* + * This should not really happen. The AP has marked all + * lower ACs to require admission control which is not + * a reasonable configuration. Allow the frame to be + * transmitted using AC_BK as a workaround. + */ + break; + } + } + + /* Check to see if this is a reserved TID */ + if (sta && sta->reserved_tid == skb->priority) + skb->priority = ieee80211_fix_reserved_tid(skb->priority); + + /* look up which queue to use for frames with this 1d tag */ + return ieee802_1d_to_ac[skb->priority]; +} + +/* Indicate which queue to use for this fully formed 802.11 frame */ +u16 ieee80211_select_queue_80211(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, + struct ieee80211_hdr *hdr) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + u8 *p; + + /* Ensure hash is set prior to potential SW encryption */ + skb_get_hash(skb); + + if ((info->control.flags & IEEE80211_TX_CTRL_DONT_REORDER) || + local->hw.queues < IEEE80211_NUM_ACS) + return 0; + + if (!ieee80211_is_data(hdr->frame_control)) { + skb->priority = 7; + return ieee802_1d_to_ac[skb->priority]; + } + if (!ieee80211_is_data_qos(hdr->frame_control)) { + skb->priority = 0; + return ieee802_1d_to_ac[skb->priority]; + } + + p = ieee80211_get_qos_ctl(hdr); + skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK; + + return ieee80211_downgrade_queue(sdata, NULL, skb); +} + +u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, struct sk_buff *skb) +{ + struct mac80211_qos_map *qos_map; + bool qos; + + /* Ensure hash is set prior to potential SW encryption */ + skb_get_hash(skb); + + /* all mesh/ocb stations are required to support WME */ + if (sta && (sdata->vif.type == NL80211_IFTYPE_MESH_POINT || + sdata->vif.type == NL80211_IFTYPE_OCB)) + qos = true; + else if (sta) + qos = sta->sta.wme; + else + qos = false; + + if (!qos) { + skb->priority = 0; /* required for correct WPA/11i MIC */ + return IEEE80211_AC_BE; + } + + if (skb->protocol == sdata->control_port_protocol) { + skb->priority = 7; + goto downgrade; + } + + /* use the data classifier to determine what 802.1d tag the + * data frame has */ + qos_map = rcu_dereference(sdata->qos_map); + skb->priority = cfg80211_classify8021d(skb, qos_map ? + &qos_map->qos_map : NULL); + + downgrade: + return ieee80211_downgrade_queue(sdata, sta, skb); +} + +/** + * ieee80211_set_qos_hdr - Fill in the QoS header if there is one. + * + * @sdata: local subif + * @skb: packet to be updated + */ +void ieee80211_set_qos_hdr(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb) +{ + struct ieee80211_hdr *hdr = (void *)skb->data; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; + u8 flags; + u8 *p; + + if (!ieee80211_is_data_qos(hdr->frame_control)) + return; + + p = ieee80211_get_qos_ctl(hdr); + + /* don't overwrite the QoS field of injected frames */ + if (info->flags & IEEE80211_TX_CTL_INJECTED) { + /* do take into account Ack policy of injected frames */ + if (*p & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) + info->flags |= IEEE80211_TX_CTL_NO_ACK; + return; + } + + /* set up the first byte */ + + /* + * preserve everything but the TID and ACK policy + * (which we both write here) + */ + flags = *p & ~(IEEE80211_QOS_CTL_TID_MASK | + IEEE80211_QOS_CTL_ACK_POLICY_MASK); + + if (is_multicast_ether_addr(hdr->addr1) || + sdata->noack_map & BIT(tid)) { + flags |= IEEE80211_QOS_CTL_ACK_POLICY_NOACK; + info->flags |= IEEE80211_TX_CTL_NO_ACK; + } + + *p = flags | tid; + + /* set up the second byte */ + p++; + + if (ieee80211_vif_is_mesh(&sdata->vif)) { + /* preserve RSPI and Mesh PS Level bit */ + *p &= ((IEEE80211_QOS_CTL_RSPI | + IEEE80211_QOS_CTL_MESH_PS_LEVEL) >> 8); + + /* Nulls don't have a mesh header (frame body) */ + if (!ieee80211_is_qos_nullfunc(hdr->frame_control)) + *p |= (IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT >> 8); + } else { + *p = 0; + } +} -- cgit v1.2.3