From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/sunrpc/auth_gss/gss_krb5_keys.c | 322 ++++++++++++++++++++++++++++++++++++ 1 file changed, 322 insertions(+) create mode 100644 net/sunrpc/auth_gss/gss_krb5_keys.c (limited to 'net/sunrpc/auth_gss/gss_krb5_keys.c') diff --git a/net/sunrpc/auth_gss/gss_krb5_keys.c b/net/sunrpc/auth_gss/gss_krb5_keys.c new file mode 100644 index 000000000..726c07695 --- /dev/null +++ b/net/sunrpc/auth_gss/gss_krb5_keys.c @@ -0,0 +1,322 @@ +/* + * COPYRIGHT (c) 2008 + * The Regents of the University of Michigan + * ALL RIGHTS RESERVED + * + * Permission is granted to use, copy, create derivative works + * and redistribute this software and such derivative works + * for any purpose, so long as the name of The University of + * Michigan is not used in any advertising or publicity + * pertaining to the use of distribution of this software + * without specific, written prior authorization. If the + * above copyright notice or any other identification of the + * University of Michigan is included in any copy of any + * portion of this software, then the disclaimer below must + * also be included. + * + * THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION + * FROM THE UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY + * PURPOSE, AND WITHOUT WARRANTY BY THE UNIVERSITY OF + * MICHIGAN OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING + * WITHOUT LIMITATION THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE + * REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE + * FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM ARISING + * OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN + * IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGES. + */ + +/* + * Copyright (C) 1998 by the FundsXpress, INC. + * + * All rights reserved. + * + * Export of this software from the United States of America may require + * a specific license from the United States Government. It is the + * responsibility of any person or organization contemplating export to + * obtain such a license before exporting. + * + * WITHIN THAT CONSTRAINT, permission to use, copy, modify, and + * distribute this software and its documentation for any purpose and + * without fee is hereby granted, provided that the above copyright + * notice appear in all copies and that both that copyright notice and + * this permission notice appear in supporting documentation, and that + * the name of FundsXpress. not be used in advertising or publicity pertaining + * to distribution of the software without specific, written prior + * permission. FundsXpress makes no representations about the suitability of + * this software for any purpose. It is provided "as is" without express + * or implied warranty. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ + +#include +#include +#include +#include +#include +#include + +#if IS_ENABLED(CONFIG_SUNRPC_DEBUG) +# define RPCDBG_FACILITY RPCDBG_AUTH +#endif + +/* + * This is the n-fold function as described in rfc3961, sec 5.1 + * Taken from MIT Kerberos and modified. + */ + +static void krb5_nfold(u32 inbits, const u8 *in, + u32 outbits, u8 *out) +{ + unsigned long ulcm; + int byte, i, msbit; + + /* the code below is more readable if I make these bytes + instead of bits */ + + inbits >>= 3; + outbits >>= 3; + + /* first compute lcm(n,k) */ + ulcm = lcm(inbits, outbits); + + /* now do the real work */ + + memset(out, 0, outbits); + byte = 0; + + /* this will end up cycling through k lcm(k,n)/k times, which + is correct */ + for (i = ulcm-1; i >= 0; i--) { + /* compute the msbit in k which gets added into this byte */ + msbit = ( + /* first, start with the msbit in the first, + * unrotated byte */ + ((inbits << 3) - 1) + /* then, for each byte, shift to the right + * for each repetition */ + + (((inbits << 3) + 13) * (i/inbits)) + /* last, pick out the correct byte within + * that shifted repetition */ + + ((inbits - (i % inbits)) << 3) + ) % (inbits << 3); + + /* pull out the byte value itself */ + byte += (((in[((inbits - 1) - (msbit >> 3)) % inbits] << 8)| + (in[((inbits) - (msbit >> 3)) % inbits])) + >> ((msbit & 7) + 1)) & 0xff; + + /* do the addition */ + byte += out[i % outbits]; + out[i % outbits] = byte & 0xff; + + /* keep around the carry bit, if any */ + byte >>= 8; + + } + + /* if there's a carry bit left over, add it back in */ + if (byte) { + for (i = outbits - 1; i >= 0; i--) { + /* do the addition */ + byte += out[i]; + out[i] = byte & 0xff; + + /* keep around the carry bit, if any */ + byte >>= 8; + } + } +} + +/* + * This is the DK (derive_key) function as described in rfc3961, sec 5.1 + * Taken from MIT Kerberos and modified. + */ + +u32 krb5_derive_key(const struct gss_krb5_enctype *gk5e, + const struct xdr_netobj *inkey, + struct xdr_netobj *outkey, + const struct xdr_netobj *in_constant, + gfp_t gfp_mask) +{ + size_t blocksize, keybytes, keylength, n; + unsigned char *inblockdata, *outblockdata, *rawkey; + struct xdr_netobj inblock, outblock; + struct crypto_sync_skcipher *cipher; + u32 ret = EINVAL; + + blocksize = gk5e->blocksize; + keybytes = gk5e->keybytes; + keylength = gk5e->keylength; + + if ((inkey->len != keylength) || (outkey->len != keylength)) + goto err_return; + + cipher = crypto_alloc_sync_skcipher(gk5e->encrypt_name, 0, 0); + if (IS_ERR(cipher)) + goto err_return; + if (crypto_sync_skcipher_setkey(cipher, inkey->data, inkey->len)) + goto err_return; + + /* allocate and set up buffers */ + + ret = ENOMEM; + inblockdata = kmalloc(blocksize, gfp_mask); + if (inblockdata == NULL) + goto err_free_cipher; + + outblockdata = kmalloc(blocksize, gfp_mask); + if (outblockdata == NULL) + goto err_free_in; + + rawkey = kmalloc(keybytes, gfp_mask); + if (rawkey == NULL) + goto err_free_out; + + inblock.data = (char *) inblockdata; + inblock.len = blocksize; + + outblock.data = (char *) outblockdata; + outblock.len = blocksize; + + /* initialize the input block */ + + if (in_constant->len == inblock.len) { + memcpy(inblock.data, in_constant->data, inblock.len); + } else { + krb5_nfold(in_constant->len * 8, in_constant->data, + inblock.len * 8, inblock.data); + } + + /* loop encrypting the blocks until enough key bytes are generated */ + + n = 0; + while (n < keybytes) { + (*(gk5e->encrypt))(cipher, NULL, inblock.data, + outblock.data, inblock.len); + + if ((keybytes - n) <= outblock.len) { + memcpy(rawkey + n, outblock.data, (keybytes - n)); + break; + } + + memcpy(rawkey + n, outblock.data, outblock.len); + memcpy(inblock.data, outblock.data, outblock.len); + n += outblock.len; + } + + /* postprocess the key */ + + inblock.data = (char *) rawkey; + inblock.len = keybytes; + + BUG_ON(gk5e->mk_key == NULL); + ret = (*(gk5e->mk_key))(gk5e, &inblock, outkey); + if (ret) { + dprintk("%s: got %d from mk_key function for '%s'\n", + __func__, ret, gk5e->encrypt_name); + goto err_free_raw; + } + + /* clean memory, free resources and exit */ + + ret = 0; + +err_free_raw: + kfree_sensitive(rawkey); +err_free_out: + kfree_sensitive(outblockdata); +err_free_in: + kfree_sensitive(inblockdata); +err_free_cipher: + crypto_free_sync_skcipher(cipher); +err_return: + return ret; +} + +#define smask(step) ((1<>step)&smask(step))) +#define parity_char(x) pstep(pstep(pstep((x), 4), 2), 1) + +static void mit_des_fixup_key_parity(u8 key[8]) +{ + int i; + for (i = 0; i < 8; i++) { + key[i] &= 0xfe; + key[i] |= 1^parity_char(key[i]); + } +} + +/* + * This is the des3 key derivation postprocess function + */ +u32 gss_krb5_des3_make_key(const struct gss_krb5_enctype *gk5e, + struct xdr_netobj *randombits, + struct xdr_netobj *key) +{ + int i; + u32 ret = EINVAL; + + if (key->len != 24) { + dprintk("%s: key->len is %d\n", __func__, key->len); + goto err_out; + } + if (randombits->len != 21) { + dprintk("%s: randombits->len is %d\n", + __func__, randombits->len); + goto err_out; + } + + /* take the seven bytes, move them around into the top 7 bits of the + 8 key bytes, then compute the parity bits. Do this three times. */ + + for (i = 0; i < 3; i++) { + memcpy(key->data + i*8, randombits->data + i*7, 7); + key->data[i*8+7] = (((key->data[i*8]&1)<<1) | + ((key->data[i*8+1]&1)<<2) | + ((key->data[i*8+2]&1)<<3) | + ((key->data[i*8+3]&1)<<4) | + ((key->data[i*8+4]&1)<<5) | + ((key->data[i*8+5]&1)<<6) | + ((key->data[i*8+6]&1)<<7)); + + mit_des_fixup_key_parity(key->data + i*8); + } + ret = 0; +err_out: + return ret; +} + +/* + * This is the aes key derivation postprocess function + */ +u32 gss_krb5_aes_make_key(const struct gss_krb5_enctype *gk5e, + struct xdr_netobj *randombits, + struct xdr_netobj *key) +{ + u32 ret = EINVAL; + + if (key->len != 16 && key->len != 32) { + dprintk("%s: key->len is %d\n", __func__, key->len); + goto err_out; + } + if (randombits->len != 16 && randombits->len != 32) { + dprintk("%s: randombits->len is %d\n", + __func__, randombits->len); + goto err_out; + } + if (randombits->len != key->len) { + dprintk("%s: randombits->len is %d, key->len is %d\n", + __func__, randombits->len, key->len); + goto err_out; + } + memcpy(key->data, randombits->data, key->len); + ret = 0; +err_out: + return ret; +} -- cgit v1.2.3