From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- net/x25/x25_proc.c | 206 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 net/x25/x25_proc.c (limited to 'net/x25/x25_proc.c') diff --git a/net/x25/x25_proc.c b/net/x25/x25_proc.c new file mode 100644 index 000000000..0412814a2 --- /dev/null +++ b/net/x25/x25_proc.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * X.25 Packet Layer release 002 + * + * This is ALPHA test software. This code may break your machine, + * randomly fail to work with new releases, misbehave and/or generally + * screw up. It might even work. + * + * This code REQUIRES 2.4 with seq_file support + * + * History + * 2002/10/06 Arnaldo Carvalho de Melo seq_file support + */ + +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PROC_FS + +static void *x25_seq_route_start(struct seq_file *seq, loff_t *pos) + __acquires(x25_route_list_lock) +{ + read_lock_bh(&x25_route_list_lock); + return seq_list_start_head(&x25_route_list, *pos); +} + +static void *x25_seq_route_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return seq_list_next(v, &x25_route_list, pos); +} + +static void x25_seq_route_stop(struct seq_file *seq, void *v) + __releases(x25_route_list_lock) +{ + read_unlock_bh(&x25_route_list_lock); +} + +static int x25_seq_route_show(struct seq_file *seq, void *v) +{ + struct x25_route *rt = list_entry(v, struct x25_route, node); + + if (v == &x25_route_list) { + seq_puts(seq, "Address Digits Device\n"); + goto out; + } + + rt = v; + seq_printf(seq, "%-15s %-6d %-5s\n", + rt->address.x25_addr, rt->sigdigits, + rt->dev ? rt->dev->name : "???"); +out: + return 0; +} + +static void *x25_seq_socket_start(struct seq_file *seq, loff_t *pos) + __acquires(x25_list_lock) +{ + read_lock_bh(&x25_list_lock); + return seq_hlist_start_head(&x25_list, *pos); +} + +static void *x25_seq_socket_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return seq_hlist_next(v, &x25_list, pos); +} + +static void x25_seq_socket_stop(struct seq_file *seq, void *v) + __releases(x25_list_lock) +{ + read_unlock_bh(&x25_list_lock); +} + +static int x25_seq_socket_show(struct seq_file *seq, void *v) +{ + struct sock *s; + struct x25_sock *x25; + const char *devname; + + if (v == SEQ_START_TOKEN) { + seq_printf(seq, "dest_addr src_addr dev lci st vs vr " + "va t t2 t21 t22 t23 Snd-Q Rcv-Q inode\n"); + goto out; + } + + s = sk_entry(v); + x25 = x25_sk(s); + + if (!x25->neighbour || !x25->neighbour->dev) + devname = "???"; + else + devname = x25->neighbour->dev->name; + + seq_printf(seq, "%-10s %-10s %-5s %3.3X %d %d %d %d %3lu %3lu " + "%3lu %3lu %3lu %5d %5d %ld\n", + !x25->dest_addr.x25_addr[0] ? "*" : x25->dest_addr.x25_addr, + !x25->source_addr.x25_addr[0] ? "*" : x25->source_addr.x25_addr, + devname, x25->lci & 0x0FFF, x25->state, x25->vs, x25->vr, + x25->va, x25_display_timer(s) / HZ, x25->t2 / HZ, + x25->t21 / HZ, x25->t22 / HZ, x25->t23 / HZ, + sk_wmem_alloc_get(s), + sk_rmem_alloc_get(s), + s->sk_socket ? SOCK_INODE(s->sk_socket)->i_ino : 0L); +out: + return 0; +} + +static void *x25_seq_forward_start(struct seq_file *seq, loff_t *pos) + __acquires(x25_forward_list_lock) +{ + read_lock_bh(&x25_forward_list_lock); + return seq_list_start_head(&x25_forward_list, *pos); +} + +static void *x25_seq_forward_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return seq_list_next(v, &x25_forward_list, pos); +} + +static void x25_seq_forward_stop(struct seq_file *seq, void *v) + __releases(x25_forward_list_lock) +{ + read_unlock_bh(&x25_forward_list_lock); +} + +static int x25_seq_forward_show(struct seq_file *seq, void *v) +{ + struct x25_forward *f = list_entry(v, struct x25_forward, node); + + if (v == &x25_forward_list) { + seq_printf(seq, "lci dev1 dev2\n"); + goto out; + } + + f = v; + + seq_printf(seq, "%d %-10s %-10s\n", + f->lci, f->dev1->name, f->dev2->name); +out: + return 0; +} + +static const struct seq_operations x25_seq_route_ops = { + .start = x25_seq_route_start, + .next = x25_seq_route_next, + .stop = x25_seq_route_stop, + .show = x25_seq_route_show, +}; + +static const struct seq_operations x25_seq_socket_ops = { + .start = x25_seq_socket_start, + .next = x25_seq_socket_next, + .stop = x25_seq_socket_stop, + .show = x25_seq_socket_show, +}; + +static const struct seq_operations x25_seq_forward_ops = { + .start = x25_seq_forward_start, + .next = x25_seq_forward_next, + .stop = x25_seq_forward_stop, + .show = x25_seq_forward_show, +}; + +int __init x25_proc_init(void) +{ + if (!proc_mkdir("x25", init_net.proc_net)) + return -ENOMEM; + + if (!proc_create_seq("x25/route", 0444, init_net.proc_net, + &x25_seq_route_ops)) + goto out; + + if (!proc_create_seq("x25/socket", 0444, init_net.proc_net, + &x25_seq_socket_ops)) + goto out; + + if (!proc_create_seq("x25/forward", 0444, init_net.proc_net, + &x25_seq_forward_ops)) + goto out; + return 0; + +out: + remove_proc_subtree("x25", init_net.proc_net); + return -ENOMEM; +} + +void __exit x25_proc_exit(void) +{ + remove_proc_subtree("x25", init_net.proc_net); +} + +#else /* CONFIG_PROC_FS */ + +int __init x25_proc_init(void) +{ + return 0; +} + +void __exit x25_proc_exit(void) +{ +} +#endif /* CONFIG_PROC_FS */ -- cgit v1.2.3