From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- rust/alloc/vec/drain.rs | 186 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 rust/alloc/vec/drain.rs (limited to 'rust/alloc/vec/drain.rs') diff --git a/rust/alloc/vec/drain.rs b/rust/alloc/vec/drain.rs new file mode 100644 index 000000000..b6a5f98e4 --- /dev/null +++ b/rust/alloc/vec/drain.rs @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use crate::alloc::{Allocator, Global}; +use core::fmt; +use core::iter::{FusedIterator, TrustedLen}; +use core::mem; +use core::ptr::{self, NonNull}; +use core::slice::{self}; + +use super::Vec; + +/// A draining iterator for `Vec`. +/// +/// This `struct` is created by [`Vec::drain`]. +/// See its documentation for more. +/// +/// # Example +/// +/// ``` +/// let mut v = vec![0, 1, 2]; +/// let iter: std::vec::Drain<_> = v.drain(..); +/// ``` +#[stable(feature = "drain", since = "1.6.0")] +pub struct Drain< + 'a, + T: 'a, + #[unstable(feature = "allocator_api", issue = "32838")] A: Allocator + 'a = Global, +> { + /// Index of tail to preserve + pub(super) tail_start: usize, + /// Length of tail + pub(super) tail_len: usize, + /// Current remaining range to remove + pub(super) iter: slice::Iter<'a, T>, + pub(super) vec: NonNull>, +} + +#[stable(feature = "collection_debug", since = "1.17.0")] +impl fmt::Debug for Drain<'_, T, A> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + f.debug_tuple("Drain").field(&self.iter.as_slice()).finish() + } +} + +impl<'a, T, A: Allocator> Drain<'a, T, A> { + /// Returns the remaining items of this iterator as a slice. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec!['a', 'b', 'c']; + /// let mut drain = vec.drain(..); + /// assert_eq!(drain.as_slice(), &['a', 'b', 'c']); + /// let _ = drain.next().unwrap(); + /// assert_eq!(drain.as_slice(), &['b', 'c']); + /// ``` + #[must_use] + #[stable(feature = "vec_drain_as_slice", since = "1.46.0")] + pub fn as_slice(&self) -> &[T] { + self.iter.as_slice() + } + + /// Returns a reference to the underlying allocator. + #[unstable(feature = "allocator_api", issue = "32838")] + #[must_use] + #[inline] + pub fn allocator(&self) -> &A { + unsafe { self.vec.as_ref().allocator() } + } +} + +#[stable(feature = "vec_drain_as_slice", since = "1.46.0")] +impl<'a, T, A: Allocator> AsRef<[T]> for Drain<'a, T, A> { + fn as_ref(&self) -> &[T] { + self.as_slice() + } +} + +#[stable(feature = "drain", since = "1.6.0")] +unsafe impl Sync for Drain<'_, T, A> {} +#[stable(feature = "drain", since = "1.6.0")] +unsafe impl Send for Drain<'_, T, A> {} + +#[stable(feature = "drain", since = "1.6.0")] +impl Iterator for Drain<'_, T, A> { + type Item = T; + + #[inline] + fn next(&mut self) -> Option { + self.iter.next().map(|elt| unsafe { ptr::read(elt as *const _) }) + } + + fn size_hint(&self) -> (usize, Option) { + self.iter.size_hint() + } +} + +#[stable(feature = "drain", since = "1.6.0")] +impl DoubleEndedIterator for Drain<'_, T, A> { + #[inline] + fn next_back(&mut self) -> Option { + self.iter.next_back().map(|elt| unsafe { ptr::read(elt as *const _) }) + } +} + +#[stable(feature = "drain", since = "1.6.0")] +impl Drop for Drain<'_, T, A> { + fn drop(&mut self) { + /// Moves back the un-`Drain`ed elements to restore the original `Vec`. + struct DropGuard<'r, 'a, T, A: Allocator>(&'r mut Drain<'a, T, A>); + + impl<'r, 'a, T, A: Allocator> Drop for DropGuard<'r, 'a, T, A> { + fn drop(&mut self) { + if self.0.tail_len > 0 { + unsafe { + let source_vec = self.0.vec.as_mut(); + // memmove back untouched tail, update to new length + let start = source_vec.len(); + let tail = self.0.tail_start; + if tail != start { + let src = source_vec.as_ptr().add(tail); + let dst = source_vec.as_mut_ptr().add(start); + ptr::copy(src, dst, self.0.tail_len); + } + source_vec.set_len(start + self.0.tail_len); + } + } + } + } + + let iter = mem::replace(&mut self.iter, (&mut []).iter()); + let drop_len = iter.len(); + + let mut vec = self.vec; + + if mem::size_of::() == 0 { + // ZSTs have no identity, so we don't need to move them around, we only need to drop the correct amount. + // this can be achieved by manipulating the Vec length instead of moving values out from `iter`. + unsafe { + let vec = vec.as_mut(); + let old_len = vec.len(); + vec.set_len(old_len + drop_len + self.tail_len); + vec.truncate(old_len + self.tail_len); + } + + return; + } + + // ensure elements are moved back into their appropriate places, even when drop_in_place panics + let _guard = DropGuard(self); + + if drop_len == 0 { + return; + } + + // as_slice() must only be called when iter.len() is > 0 because + // vec::Splice modifies vec::Drain fields and may grow the vec which would invalidate + // the iterator's internal pointers. Creating a reference to deallocated memory + // is invalid even when it is zero-length + let drop_ptr = iter.as_slice().as_ptr(); + + unsafe { + // drop_ptr comes from a slice::Iter which only gives us a &[T] but for drop_in_place + // a pointer with mutable provenance is necessary. Therefore we must reconstruct + // it from the original vec but also avoid creating a &mut to the front since that could + // invalidate raw pointers to it which some unsafe code might rely on. + let vec_ptr = vec.as_mut().as_mut_ptr(); + let drop_offset = drop_ptr.sub_ptr(vec_ptr); + let to_drop = ptr::slice_from_raw_parts_mut(vec_ptr.add(drop_offset), drop_len); + ptr::drop_in_place(to_drop); + } + } +} + +#[stable(feature = "drain", since = "1.6.0")] +impl ExactSizeIterator for Drain<'_, T, A> { + fn is_empty(&self) -> bool { + self.iter.is_empty() + } +} + +#[unstable(feature = "trusted_len", issue = "37572")] +unsafe impl TrustedLen for Drain<'_, T, A> {} + +#[stable(feature = "fused", since = "1.26.0")] +impl FusedIterator for Drain<'_, T, A> {} -- cgit v1.2.3