From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- samples/bpf/test_cgrp2_tc.sh | 187 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) create mode 100755 samples/bpf/test_cgrp2_tc.sh (limited to 'samples/bpf/test_cgrp2_tc.sh') diff --git a/samples/bpf/test_cgrp2_tc.sh b/samples/bpf/test_cgrp2_tc.sh new file mode 100755 index 000000000..38e8dbc9d --- /dev/null +++ b/samples/bpf/test_cgrp2_tc.sh @@ -0,0 +1,187 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +MY_DIR=$(dirname $0) +# Details on the bpf prog +BPF_CGRP2_ARRAY_NAME='test_cgrp2_array_pin' +BPF_PROG="$MY_DIR/test_cgrp2_tc.bpf.o" +BPF_SECTION='filter' + +[ -z "$TC" ] && TC='tc' +[ -z "$IP" ] && IP='ip' + +# Names of the veth interface, net namespace...etc. +HOST_IFC='ve' +NS_IFC='vens' +NS='ns' + +find_mnt() { + cat /proc/mounts | \ + awk '{ if ($3 == "'$1'" && mnt == "") { mnt = $2 }} END { print mnt }' +} + +# Init cgroup2 vars +init_cgrp2_vars() { + CGRP2_ROOT=$(find_mnt cgroup2) + if [ -z "$CGRP2_ROOT" ] + then + CGRP2_ROOT='/mnt/cgroup2' + MOUNT_CGRP2="yes" + fi + CGRP2_TC="$CGRP2_ROOT/tc" + CGRP2_TC_LEAF="$CGRP2_TC/leaf" +} + +# Init bpf fs vars +init_bpf_fs_vars() { + local bpf_fs_root=$(find_mnt bpf) + [ -n "$bpf_fs_root" ] || return -1 + BPF_FS_TC_SHARE="$bpf_fs_root/tc/globals" +} + +setup_cgrp2() { + case $1 in + start) + if [ "$MOUNT_CGRP2" == 'yes' ] + then + [ -d $CGRP2_ROOT ] || mkdir -p $CGRP2_ROOT + mount -t cgroup2 none $CGRP2_ROOT || return $? + fi + mkdir -p $CGRP2_TC_LEAF + ;; + *) + rmdir $CGRP2_TC_LEAF && rmdir $CGRP2_TC + [ "$MOUNT_CGRP2" == 'yes' ] && umount $CGRP2_ROOT + ;; + esac +} + +setup_bpf_cgrp2_array() { + local bpf_cgrp2_array="$BPF_FS_TC_SHARE/$BPF_CGRP2_ARRAY_NAME" + case $1 in + start) + $MY_DIR/test_cgrp2_array_pin -U $bpf_cgrp2_array -v $CGRP2_TC + ;; + *) + [ -d "$BPF_FS_TC_SHARE" ] && rm -f $bpf_cgrp2_array + ;; + esac +} + +setup_net() { + case $1 in + start) + $IP link add $HOST_IFC type veth peer name $NS_IFC || return $? + $IP link set dev $HOST_IFC up || return $? + sysctl -q net.ipv6.conf.$HOST_IFC.disable_ipv6=0 + sysctl -q net.ipv6.conf.$HOST_IFC.accept_dad=0 + + $IP netns add $NS || return $? + $IP link set dev $NS_IFC netns $NS || return $? + $IP -n $NS link set dev $NS_IFC up || return $? + $IP netns exec $NS sysctl -q net.ipv6.conf.$NS_IFC.disable_ipv6=0 + $IP netns exec $NS sysctl -q net.ipv6.conf.$NS_IFC.accept_dad=0 + $TC qdisc add dev $HOST_IFC clsact || return $? + $TC filter add dev $HOST_IFC egress bpf da obj $BPF_PROG sec $BPF_SECTION || return $? + ;; + *) + $IP netns del $NS + $IP link del $HOST_IFC + ;; + esac +} + +run_in_cgrp() { + # Fork another bash and move it under the specified cgroup. + # It makes the cgroup cleanup easier at the end of the test. + cmd='echo $$ > ' + cmd="$cmd $1/cgroup.procs; exec $2" + bash -c "$cmd" +} + +do_test() { + run_in_cgrp $CGRP2_TC_LEAF "ping -6 -c3 ff02::1%$HOST_IFC >& /dev/null" + local dropped=$($TC -s qdisc show dev $HOST_IFC | tail -3 | \ + awk '/drop/{print substr($7, 0, index($7, ",")-1)}') + if [[ $dropped -eq 0 ]] + then + echo "FAIL" + return 1 + else + echo "Successfully filtered $dropped packets" + return 0 + fi +} + +do_exit() { + if [ "$DEBUG" == "yes" ] && [ "$MODE" != 'cleanuponly' ] + then + echo "------ DEBUG ------" + echo "mount: "; mount | grep -E '(cgroup2|bpf)'; echo + echo "$CGRP2_TC_LEAF: "; ls -l $CGRP2_TC_LEAF; echo + if [ -d "$BPF_FS_TC_SHARE" ] + then + echo "$BPF_FS_TC_SHARE: "; ls -l $BPF_FS_TC_SHARE; echo + fi + echo "Host net:" + $IP netns + $IP link show dev $HOST_IFC + $IP -6 a show dev $HOST_IFC + $TC -s qdisc show dev $HOST_IFC + echo + echo "$NS net:" + $IP -n $NS link show dev $NS_IFC + $IP -n $NS -6 link show dev $NS_IFC + echo "------ DEBUG ------" + echo + fi + + if [ "$MODE" != 'nocleanup' ] + then + setup_net stop + setup_bpf_cgrp2_array stop + setup_cgrp2 stop + fi +} + +init_cgrp2_vars +init_bpf_fs_vars + +while [[ $# -ge 1 ]] +do + a="$1" + case $a in + debug) + DEBUG='yes' + shift 1 + ;; + cleanup-only) + MODE='cleanuponly' + shift 1 + ;; + no-cleanup) + MODE='nocleanup' + shift 1 + ;; + *) + echo "test_cgrp2_tc [debug] [cleanup-only | no-cleanup]" + echo " debug: Print cgrp and network setup details at the end of the test" + echo " cleanup-only: Try to cleanup things from last test. No test will be run" + echo " no-cleanup: Run the test but don't do cleanup at the end" + echo "[Note: If no arg is given, it will run the test and do cleanup at the end]" + echo + exit -1 + ;; + esac +done + +trap do_exit 0 + +[ "$MODE" == 'cleanuponly' ] && exit + +setup_cgrp2 start || exit $? +setup_net start || exit $? +init_bpf_fs_vars || exit $? +setup_bpf_cgrp2_array start || exit $? +do_test +echo -- cgit v1.2.3