From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- samples/hidraw/hid-example.c | 182 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 samples/hidraw/hid-example.c (limited to 'samples/hidraw/hid-example.c') diff --git a/samples/hidraw/hid-example.c b/samples/hidraw/hid-example.c new file mode 100644 index 000000000..0f73ace3c --- /dev/null +++ b/samples/hidraw/hid-example.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Hidraw Userspace Example + * + * Copyright (c) 2010 Alan Ott + * Copyright (c) 2010 Signal 11 Software + * + * The code may be used by anyone for any purpose, + * and can serve as a starting point for developing + * applications using hidraw. + */ + +/* Linux */ +#include +#include +#include + +/* + * Ugly hack to work around failing compilation on systems that don't + * yet populate new version of hidraw.h to userspace. + */ +#ifndef HIDIOCSFEATURE +#warning Please have your distro update the userspace kernel headers +#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) +#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) +#endif + +/* Unix */ +#include +#include +#include +#include +#include + +/* C */ +#include +#include +#include +#include + +const char *bus_str(int bus); + +int main(int argc, char **argv) +{ + int fd; + int i, res, desc_size = 0; + char buf[256]; + struct hidraw_report_descriptor rpt_desc; + struct hidraw_devinfo info; + char *device = "/dev/hidraw0"; + + if (argc > 1) + device = argv[1]; + + /* Open the Device with non-blocking reads. In real life, + don't use a hard coded path; use libudev instead. */ + fd = open(device, O_RDWR|O_NONBLOCK); + + if (fd < 0) { + perror("Unable to open device"); + return 1; + } + + memset(&rpt_desc, 0x0, sizeof(rpt_desc)); + memset(&info, 0x0, sizeof(info)); + memset(buf, 0x0, sizeof(buf)); + + /* Get Report Descriptor Size */ + res = ioctl(fd, HIDIOCGRDESCSIZE, &desc_size); + if (res < 0) + perror("HIDIOCGRDESCSIZE"); + else + printf("Report Descriptor Size: %d\n", desc_size); + + /* Get Report Descriptor */ + rpt_desc.size = desc_size; + res = ioctl(fd, HIDIOCGRDESC, &rpt_desc); + if (res < 0) { + perror("HIDIOCGRDESC"); + } else { + printf("Report Descriptor:\n"); + for (i = 0; i < rpt_desc.size; i++) + printf("%hhx ", rpt_desc.value[i]); + puts("\n"); + } + + /* Get Raw Name */ + res = ioctl(fd, HIDIOCGRAWNAME(256), buf); + if (res < 0) + perror("HIDIOCGRAWNAME"); + else + printf("Raw Name: %s\n", buf); + + /* Get Physical Location */ + res = ioctl(fd, HIDIOCGRAWPHYS(256), buf); + if (res < 0) + perror("HIDIOCGRAWPHYS"); + else + printf("Raw Phys: %s\n", buf); + + /* Get Raw Info */ + res = ioctl(fd, HIDIOCGRAWINFO, &info); + if (res < 0) { + perror("HIDIOCGRAWINFO"); + } else { + printf("Raw Info:\n"); + printf("\tbustype: %d (%s)\n", + info.bustype, bus_str(info.bustype)); + printf("\tvendor: 0x%04hx\n", info.vendor); + printf("\tproduct: 0x%04hx\n", info.product); + } + + /* Set Feature */ + buf[0] = 0x9; /* Report Number */ + buf[1] = 0xff; + buf[2] = 0xff; + buf[3] = 0xff; + res = ioctl(fd, HIDIOCSFEATURE(4), buf); + if (res < 0) + perror("HIDIOCSFEATURE"); + else + printf("ioctl HIDIOCSFEATURE returned: %d\n", res); + + /* Get Feature */ + buf[0] = 0x9; /* Report Number */ + res = ioctl(fd, HIDIOCGFEATURE(256), buf); + if (res < 0) { + perror("HIDIOCGFEATURE"); + } else { + printf("ioctl HIDIOCGFEATURE returned: %d\n", res); + printf("Report data:\n\t"); + for (i = 0; i < res; i++) + printf("%hhx ", buf[i]); + puts("\n"); + } + + /* Send a Report to the Device */ + buf[0] = 0x1; /* Report Number */ + buf[1] = 0x77; + res = write(fd, buf, 2); + if (res < 0) { + printf("Error: %d\n", errno); + perror("write"); + } else { + printf("write() wrote %d bytes\n", res); + } + + /* Get a report from the device */ + res = read(fd, buf, 16); + if (res < 0) { + perror("read"); + } else { + printf("read() read %d bytes:\n\t", res); + for (i = 0; i < res; i++) + printf("%hhx ", buf[i]); + puts("\n"); + } + close(fd); + return 0; +} + +const char * +bus_str(int bus) +{ + switch (bus) { + case BUS_USB: + return "USB"; + break; + case BUS_HIL: + return "HIL"; + break; + case BUS_BLUETOOTH: + return "Bluetooth"; + break; + case BUS_VIRTUAL: + return "Virtual"; + break; + default: + return "Other"; + break; + } +} -- cgit v1.2.3