From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- samples/uhid/uhid-example.c | 465 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 465 insertions(+) create mode 100644 samples/uhid/uhid-example.c (limited to 'samples/uhid/uhid-example.c') diff --git a/samples/uhid/uhid-example.c b/samples/uhid/uhid-example.c new file mode 100644 index 000000000..015cb06a2 --- /dev/null +++ b/samples/uhid/uhid-example.c @@ -0,0 +1,465 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * UHID Example + * + * Copyright (c) 2012-2013 David Herrmann + * + * The code may be used by anyone for any purpose, + * and can serve as a starting point for developing + * applications using uhid. + */ + +/* + * UHID Example + * This example emulates a basic 3 buttons mouse with wheel over UHID. Run this + * program as root and then use the following keys to control the mouse: + * q: Quit the application + * 1: Toggle left button (down, up, ...) + * 2: Toggle right button + * 3: Toggle middle button + * a: Move mouse left + * d: Move mouse right + * w: Move mouse up + * s: Move mouse down + * r: Move wheel up + * f: Move wheel down + * + * Additionally to 3 button mouse, 3 keyboard LEDs are also supported (LED_NUML, + * LED_CAPSL and LED_SCROLLL). The device doesn't generate any related keyboard + * events, though. You need to manually write the EV_LED/LED_XY/1 activation + * input event to the evdev device to see it being sent to this device. + * + * If uhid is not available as /dev/uhid, then you can pass a different path as + * first argument. + * If is not installed in /usr, then compile this with: + * gcc -o ./uhid_test -Wall -I./include ./samples/uhid/uhid-example.c + * And ignore the warning about kernel headers. However, it is recommended to + * use the installed uhid.h if available. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * HID Report Desciptor + * We emulate a basic 3 button mouse with wheel and 3 keyboard LEDs. This is + * the report-descriptor as the kernel will parse it: + * + * INPUT(1)[INPUT] + * Field(0) + * Physical(GenericDesktop.Pointer) + * Application(GenericDesktop.Mouse) + * Usage(3) + * Button.0001 + * Button.0002 + * Button.0003 + * Logical Minimum(0) + * Logical Maximum(1) + * Report Size(1) + * Report Count(3) + * Report Offset(0) + * Flags( Variable Absolute ) + * Field(1) + * Physical(GenericDesktop.Pointer) + * Application(GenericDesktop.Mouse) + * Usage(3) + * GenericDesktop.X + * GenericDesktop.Y + * GenericDesktop.Wheel + * Logical Minimum(-128) + * Logical Maximum(127) + * Report Size(8) + * Report Count(3) + * Report Offset(8) + * Flags( Variable Relative ) + * OUTPUT(2)[OUTPUT] + * Field(0) + * Application(GenericDesktop.Keyboard) + * Usage(3) + * LED.NumLock + * LED.CapsLock + * LED.ScrollLock + * Logical Minimum(0) + * Logical Maximum(1) + * Report Size(1) + * Report Count(3) + * Report Offset(0) + * Flags( Variable Absolute ) + * + * This is the mapping that we expect: + * Button.0001 ---> Key.LeftBtn + * Button.0002 ---> Key.RightBtn + * Button.0003 ---> Key.MiddleBtn + * GenericDesktop.X ---> Relative.X + * GenericDesktop.Y ---> Relative.Y + * GenericDesktop.Wheel ---> Relative.Wheel + * LED.NumLock ---> LED.NumLock + * LED.CapsLock ---> LED.CapsLock + * LED.ScrollLock ---> LED.ScrollLock + * + * This information can be verified by reading /sys/kernel/debug/hid//rdesc + * This file should print the same information as showed above. + */ + +static unsigned char rdesc[] = { + 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ + 0x09, 0x02, /* USAGE (Mouse) */ + 0xa1, 0x01, /* COLLECTION (Application) */ + 0x09, 0x01, /* USAGE (Pointer) */ + 0xa1, 0x00, /* COLLECTION (Physical) */ + 0x85, 0x01, /* REPORT_ID (1) */ + 0x05, 0x09, /* USAGE_PAGE (Button) */ + 0x19, 0x01, /* USAGE_MINIMUM (Button 1) */ + 0x29, 0x03, /* USAGE_MAXIMUM (Button 3) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ + 0x95, 0x03, /* REPORT_COUNT (3) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x81, 0x02, /* INPUT (Data,Var,Abs) */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x75, 0x05, /* REPORT_SIZE (5) */ + 0x81, 0x01, /* INPUT (Cnst,Var,Abs) */ + 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ + 0x09, 0x30, /* USAGE (X) */ + 0x09, 0x31, /* USAGE (Y) */ + 0x09, 0x38, /* USAGE (WHEEL) */ + 0x15, 0x81, /* LOGICAL_MINIMUM (-127) */ + 0x25, 0x7f, /* LOGICAL_MAXIMUM (127) */ + 0x75, 0x08, /* REPORT_SIZE (8) */ + 0x95, 0x03, /* REPORT_COUNT (3) */ + 0x81, 0x06, /* INPUT (Data,Var,Rel) */ + 0xc0, /* END_COLLECTION */ + 0xc0, /* END_COLLECTION */ + 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */ + 0x09, 0x06, /* USAGE (Keyboard) */ + 0xa1, 0x01, /* COLLECTION (Application) */ + 0x85, 0x02, /* REPORT_ID (2) */ + 0x05, 0x08, /* USAGE_PAGE (Led) */ + 0x19, 0x01, /* USAGE_MINIMUM (1) */ + 0x29, 0x03, /* USAGE_MAXIMUM (3) */ + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */ + 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */ + 0x95, 0x03, /* REPORT_COUNT (3) */ + 0x75, 0x01, /* REPORT_SIZE (1) */ + 0x91, 0x02, /* Output (Data,Var,Abs) */ + 0x95, 0x01, /* REPORT_COUNT (1) */ + 0x75, 0x05, /* REPORT_SIZE (5) */ + 0x91, 0x01, /* Output (Cnst,Var,Abs) */ + 0xc0, /* END_COLLECTION */ +}; + +static int uhid_write(int fd, const struct uhid_event *ev) +{ + ssize_t ret; + + ret = write(fd, ev, sizeof(*ev)); + if (ret < 0) { + fprintf(stderr, "Cannot write to uhid: %m\n"); + return -errno; + } else if (ret != sizeof(*ev)) { + fprintf(stderr, "Wrong size written to uhid: %zd != %zu\n", + ret, sizeof(ev)); + return -EFAULT; + } else { + return 0; + } +} + +static int create(int fd) +{ + struct uhid_event ev; + + memset(&ev, 0, sizeof(ev)); + ev.type = UHID_CREATE; + strcpy((char*)ev.u.create.name, "test-uhid-device"); + ev.u.create.rd_data = rdesc; + ev.u.create.rd_size = sizeof(rdesc); + ev.u.create.bus = BUS_USB; + ev.u.create.vendor = 0x15d9; + ev.u.create.product = 0x0a37; + ev.u.create.version = 0; + ev.u.create.country = 0; + + return uhid_write(fd, &ev); +} + +static void destroy(int fd) +{ + struct uhid_event ev; + + memset(&ev, 0, sizeof(ev)); + ev.type = UHID_DESTROY; + + uhid_write(fd, &ev); +} + +/* This parses raw output reports sent by the kernel to the device. A normal + * uhid program shouldn't do this but instead just forward the raw report. + * However, for ducomentational purposes, we try to detect LED events here and + * print debug messages for it. */ +static void handle_output(struct uhid_event *ev) +{ + /* LED messages are adverised via OUTPUT reports; ignore the rest */ + if (ev->u.output.rtype != UHID_OUTPUT_REPORT) + return; + /* LED reports have length 2 bytes */ + if (ev->u.output.size != 2) + return; + /* first byte is report-id which is 0x02 for LEDs in our rdesc */ + if (ev->u.output.data[0] != 0x2) + return; + + /* print flags payload */ + fprintf(stderr, "LED output report received with flags %x\n", + ev->u.output.data[1]); +} + +static int event(int fd) +{ + struct uhid_event ev; + ssize_t ret; + + memset(&ev, 0, sizeof(ev)); + ret = read(fd, &ev, sizeof(ev)); + if (ret == 0) { + fprintf(stderr, "Read HUP on uhid-cdev\n"); + return -EFAULT; + } else if (ret < 0) { + fprintf(stderr, "Cannot read uhid-cdev: %m\n"); + return -errno; + } else if (ret != sizeof(ev)) { + fprintf(stderr, "Invalid size read from uhid-dev: %zd != %zu\n", + ret, sizeof(ev)); + return -EFAULT; + } + + switch (ev.type) { + case UHID_START: + fprintf(stderr, "UHID_START from uhid-dev\n"); + break; + case UHID_STOP: + fprintf(stderr, "UHID_STOP from uhid-dev\n"); + break; + case UHID_OPEN: + fprintf(stderr, "UHID_OPEN from uhid-dev\n"); + break; + case UHID_CLOSE: + fprintf(stderr, "UHID_CLOSE from uhid-dev\n"); + break; + case UHID_OUTPUT: + fprintf(stderr, "UHID_OUTPUT from uhid-dev\n"); + handle_output(&ev); + break; + case UHID_OUTPUT_EV: + fprintf(stderr, "UHID_OUTPUT_EV from uhid-dev\n"); + break; + default: + fprintf(stderr, "Invalid event from uhid-dev: %u\n", ev.type); + } + + return 0; +} + +static bool btn1_down; +static bool btn2_down; +static bool btn3_down; +static signed char abs_hor; +static signed char abs_ver; +static signed char wheel; + +static int send_event(int fd) +{ + struct uhid_event ev; + + memset(&ev, 0, sizeof(ev)); + ev.type = UHID_INPUT; + ev.u.input.size = 5; + + ev.u.input.data[0] = 0x1; + if (btn1_down) + ev.u.input.data[1] |= 0x1; + if (btn2_down) + ev.u.input.data[1] |= 0x2; + if (btn3_down) + ev.u.input.data[1] |= 0x4; + + ev.u.input.data[2] = abs_hor; + ev.u.input.data[3] = abs_ver; + ev.u.input.data[4] = wheel; + + return uhid_write(fd, &ev); +} + +static int keyboard(int fd) +{ + char buf[128]; + ssize_t ret, i; + + ret = read(STDIN_FILENO, buf, sizeof(buf)); + if (ret == 0) { + fprintf(stderr, "Read HUP on stdin\n"); + return -EFAULT; + } else if (ret < 0) { + fprintf(stderr, "Cannot read stdin: %m\n"); + return -errno; + } + + for (i = 0; i < ret; ++i) { + switch (buf[i]) { + case '1': + btn1_down = !btn1_down; + ret = send_event(fd); + if (ret) + return ret; + break; + case '2': + btn2_down = !btn2_down; + ret = send_event(fd); + if (ret) + return ret; + break; + case '3': + btn3_down = !btn3_down; + ret = send_event(fd); + if (ret) + return ret; + break; + case 'a': + abs_hor = -20; + ret = send_event(fd); + abs_hor = 0; + if (ret) + return ret; + break; + case 'd': + abs_hor = 20; + ret = send_event(fd); + abs_hor = 0; + if (ret) + return ret; + break; + case 'w': + abs_ver = -20; + ret = send_event(fd); + abs_ver = 0; + if (ret) + return ret; + break; + case 's': + abs_ver = 20; + ret = send_event(fd); + abs_ver = 0; + if (ret) + return ret; + break; + case 'r': + wheel = 1; + ret = send_event(fd); + wheel = 0; + if (ret) + return ret; + break; + case 'f': + wheel = -1; + ret = send_event(fd); + wheel = 0; + if (ret) + return ret; + break; + case 'q': + return -ECANCELED; + default: + fprintf(stderr, "Invalid input: %c\n", buf[i]); + } + } + + return 0; +} + +int main(int argc, char **argv) +{ + int fd; + const char *path = "/dev/uhid"; + struct pollfd pfds[2]; + int ret; + struct termios state; + + ret = tcgetattr(STDIN_FILENO, &state); + if (ret) { + fprintf(stderr, "Cannot get tty state\n"); + } else { + state.c_lflag &= ~ICANON; + state.c_cc[VMIN] = 1; + ret = tcsetattr(STDIN_FILENO, TCSANOW, &state); + if (ret) + fprintf(stderr, "Cannot set tty state\n"); + } + + if (argc >= 2) { + if (!strcmp(argv[1], "-h") || !strcmp(argv[1], "--help")) { + fprintf(stderr, "Usage: %s [%s]\n", argv[0], path); + return EXIT_SUCCESS; + } else { + path = argv[1]; + } + } + + fprintf(stderr, "Open uhid-cdev %s\n", path); + fd = open(path, O_RDWR | O_CLOEXEC); + if (fd < 0) { + fprintf(stderr, "Cannot open uhid-cdev %s: %m\n", path); + return EXIT_FAILURE; + } + + fprintf(stderr, "Create uhid device\n"); + ret = create(fd); + if (ret) { + close(fd); + return EXIT_FAILURE; + } + + pfds[0].fd = STDIN_FILENO; + pfds[0].events = POLLIN; + pfds[1].fd = fd; + pfds[1].events = POLLIN; + + fprintf(stderr, "Press 'q' to quit...\n"); + while (1) { + ret = poll(pfds, 2, -1); + if (ret < 0) { + fprintf(stderr, "Cannot poll for fds: %m\n"); + break; + } + if (pfds[0].revents & POLLHUP) { + fprintf(stderr, "Received HUP on stdin\n"); + break; + } + if (pfds[1].revents & POLLHUP) { + fprintf(stderr, "Received HUP on uhid-cdev\n"); + break; + } + + if (pfds[0].revents & POLLIN) { + ret = keyboard(fd); + if (ret) + break; + } + if (pfds[1].revents & POLLIN) { + ret = event(fd); + if (ret) + break; + } + } + + fprintf(stderr, "Destroy uhid device\n"); + destroy(fd); + return EXIT_SUCCESS; +} -- cgit v1.2.3