From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- scripts/clang-tools/gen_compile_commands.py | 228 ++++++++++++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100755 scripts/clang-tools/gen_compile_commands.py (limited to 'scripts/clang-tools/gen_compile_commands.py') diff --git a/scripts/clang-tools/gen_compile_commands.py b/scripts/clang-tools/gen_compile_commands.py new file mode 100755 index 000000000..022752295 --- /dev/null +++ b/scripts/clang-tools/gen_compile_commands.py @@ -0,0 +1,228 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) Google LLC, 2018 +# +# Author: Tom Roeder +# +"""A tool for generating compile_commands.json in the Linux kernel.""" + +import argparse +import json +import logging +import os +import re +import subprocess +import sys + +_DEFAULT_OUTPUT = 'compile_commands.json' +_DEFAULT_LOG_LEVEL = 'WARNING' + +_FILENAME_PATTERN = r'^\..*\.cmd$' +_LINE_PATTERN = r'^cmd_[^ ]*\.o := (.* )([^ ]*\.c) *(;|$)' +_VALID_LOG_LEVELS = ['DEBUG', 'INFO', 'WARNING', 'ERROR', 'CRITICAL'] +# The tools/ directory adopts a different build system, and produces .cmd +# files in a different format. Do not support it. +_EXCLUDE_DIRS = ['.git', 'Documentation', 'include', 'tools'] + +def parse_arguments(): + """Sets up and parses command-line arguments. + + Returns: + log_level: A logging level to filter log output. + directory: The work directory where the objects were built. + ar: Command used for parsing .a archives. + output: Where to write the compile-commands JSON file. + paths: The list of files/directories to handle to find .cmd files. + """ + usage = 'Creates a compile_commands.json database from kernel .cmd files' + parser = argparse.ArgumentParser(description=usage) + + directory_help = ('specify the output directory used for the kernel build ' + '(defaults to the working directory)') + parser.add_argument('-d', '--directory', type=str, default='.', + help=directory_help) + + output_help = ('path to the output command database (defaults to ' + + _DEFAULT_OUTPUT + ')') + parser.add_argument('-o', '--output', type=str, default=_DEFAULT_OUTPUT, + help=output_help) + + log_level_help = ('the level of log messages to produce (defaults to ' + + _DEFAULT_LOG_LEVEL + ')') + parser.add_argument('--log_level', choices=_VALID_LOG_LEVELS, + default=_DEFAULT_LOG_LEVEL, help=log_level_help) + + ar_help = 'command used for parsing .a archives' + parser.add_argument('-a', '--ar', type=str, default='llvm-ar', help=ar_help) + + paths_help = ('directories to search or files to parse ' + '(files should be *.o, *.a, or modules.order). ' + 'If nothing is specified, the current directory is searched') + parser.add_argument('paths', type=str, nargs='*', help=paths_help) + + args = parser.parse_args() + + return (args.log_level, + os.path.abspath(args.directory), + args.output, + args.ar, + args.paths if len(args.paths) > 0 else [args.directory]) + + +def cmdfiles_in_dir(directory): + """Generate the iterator of .cmd files found under the directory. + + Walk under the given directory, and yield every .cmd file found. + + Args: + directory: The directory to search for .cmd files. + + Yields: + The path to a .cmd file. + """ + + filename_matcher = re.compile(_FILENAME_PATTERN) + exclude_dirs = [ os.path.join(directory, d) for d in _EXCLUDE_DIRS ] + + for dirpath, dirnames, filenames in os.walk(directory, topdown=True): + # Prune unwanted directories. + if dirpath in exclude_dirs: + dirnames[:] = [] + continue + + for filename in filenames: + if filename_matcher.match(filename): + yield os.path.join(dirpath, filename) + + +def to_cmdfile(path): + """Return the path of .cmd file used for the given build artifact + + Args: + Path: file path + + Returns: + The path to .cmd file + """ + dir, base = os.path.split(path) + return os.path.join(dir, '.' + base + '.cmd') + + +def cmdfiles_for_a(archive, ar): + """Generate the iterator of .cmd files associated with the archive. + + Parse the given archive, and yield every .cmd file used to build it. + + Args: + archive: The archive to parse + + Yields: + The path to every .cmd file found + """ + for obj in subprocess.check_output([ar, '-t', archive]).decode().split(): + yield to_cmdfile(obj) + + +def cmdfiles_for_modorder(modorder): + """Generate the iterator of .cmd files associated with the modules.order. + + Parse the given modules.order, and yield every .cmd file used to build the + contained modules. + + Args: + modorder: The modules.order file to parse + + Yields: + The path to every .cmd file found + """ + with open(modorder) as f: + for line in f: + obj = line.rstrip() + base, ext = os.path.splitext(obj) + if ext != '.o': + sys.exit('{}: module path must end with .o'.format(obj)) + mod = base + '.mod' + # Read from *.mod, to get a list of objects that compose the module. + with open(mod) as m: + for mod_line in m: + yield to_cmdfile(mod_line.rstrip()) + + +def process_line(root_directory, command_prefix, file_path): + """Extracts information from a .cmd line and creates an entry from it. + + Args: + root_directory: The directory that was searched for .cmd files. Usually + used directly in the "directory" entry in compile_commands.json. + command_prefix: The extracted command line, up to the last element. + file_path: The .c file from the end of the extracted command. + Usually relative to root_directory, but sometimes absolute. + + Returns: + An entry to append to compile_commands. + + Raises: + ValueError: Could not find the extracted file based on file_path and + root_directory or file_directory. + """ + # The .cmd files are intended to be included directly by Make, so they + # escape the pound sign '#', either as '\#' or '$(pound)' (depending on the + # kernel version). The compile_commands.json file is not interepreted + # by Make, so this code replaces the escaped version with '#'. + prefix = command_prefix.replace('\#', '#').replace('$(pound)', '#') + + # Use os.path.abspath() to normalize the path resolving '.' and '..' . + abs_path = os.path.abspath(os.path.join(root_directory, file_path)) + if not os.path.exists(abs_path): + raise ValueError('File %s not found' % abs_path) + return { + 'directory': root_directory, + 'file': abs_path, + 'command': prefix + file_path, + } + + +def main(): + """Walks through the directory and finds and parses .cmd files.""" + log_level, directory, output, ar, paths = parse_arguments() + + level = getattr(logging, log_level) + logging.basicConfig(format='%(levelname)s: %(message)s', level=level) + + line_matcher = re.compile(_LINE_PATTERN) + + compile_commands = [] + + for path in paths: + # If 'path' is a directory, handle all .cmd files under it. + # Otherwise, handle .cmd files associated with the file. + # built-in objects are linked via vmlinux.a + # Modules are listed in modules.order. + if os.path.isdir(path): + cmdfiles = cmdfiles_in_dir(path) + elif path.endswith('.a'): + cmdfiles = cmdfiles_for_a(path, ar) + elif path.endswith('modules.order'): + cmdfiles = cmdfiles_for_modorder(path) + else: + sys.exit('{}: unknown file type'.format(path)) + + for cmdfile in cmdfiles: + with open(cmdfile, 'rt') as f: + result = line_matcher.match(f.readline()) + if result: + try: + entry = process_line(directory, result.group(1), + result.group(2)) + compile_commands.append(entry) + except ValueError as err: + logging.info('Could not add line from %s: %s', + cmdfile, err) + + with open(output, 'wt') as f: + json.dump(compile_commands, f, indent=2, sort_keys=True) + + +if __name__ == '__main__': + main() -- cgit v1.2.3