From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- scripts/dtc/fdtoverlay.c | 208 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 scripts/dtc/fdtoverlay.c (limited to 'scripts/dtc/fdtoverlay.c') diff --git a/scripts/dtc/fdtoverlay.c b/scripts/dtc/fdtoverlay.c new file mode 100644 index 000000000..5350af656 --- /dev/null +++ b/scripts/dtc/fdtoverlay.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2017 Konsulko Group Inc. All rights reserved. + * + * Author: + * Pantelis Antoniou + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "util.h" + +#define BUF_INCREMENT 65536 + +/* Usage related data. */ +static const char usage_synopsis[] = + "apply a number of overlays to a base blob\n" + " fdtoverlay [ []]\n" + "\n" + USAGE_TYPE_MSG; +static const char usage_short_opts[] = "i:o:v" USAGE_COMMON_SHORT_OPTS; +static struct option const usage_long_opts[] = { + {"input", required_argument, NULL, 'i'}, + {"output", required_argument, NULL, 'o'}, + {"verbose", no_argument, NULL, 'v'}, + USAGE_COMMON_LONG_OPTS, +}; +static const char * const usage_opts_help[] = { + "Input base DT blob", + "Output DT blob", + "Verbose messages", + USAGE_COMMON_OPTS_HELP +}; + +int verbose = 0; + +static void *apply_one(char *base, const char *overlay, size_t *buf_len, + const char *name) +{ + char *tmp = NULL; + char *tmpo; + int ret; + + /* + * We take a copies first, because a a failed apply can trash + * both the base blob and the overlay + */ + tmpo = xmalloc(fdt_totalsize(overlay)); + + do { + tmp = xrealloc(tmp, *buf_len); + ret = fdt_open_into(base, tmp, *buf_len); + if (ret) { + fprintf(stderr, + "\nFailed to make temporary copy: %s\n", + fdt_strerror(ret)); + goto fail; + } + + memcpy(tmpo, overlay, fdt_totalsize(overlay)); + + ret = fdt_overlay_apply(tmp, tmpo); + if (ret == -FDT_ERR_NOSPACE) { + *buf_len += BUF_INCREMENT; + } + } while (ret == -FDT_ERR_NOSPACE); + + if (ret) { + fprintf(stderr, "\nFailed to apply '%s': %s\n", + name, fdt_strerror(ret)); + goto fail; + } + + free(base); + free(tmpo); + return tmp; + +fail: + free(tmpo); + if (tmp) + free(tmp); + + return NULL; +} +static int do_fdtoverlay(const char *input_filename, + const char *output_filename, + int argc, char *argv[]) +{ + char *blob = NULL; + char **ovblob = NULL; + size_t buf_len; + int i, ret = -1; + + blob = utilfdt_read(input_filename, &buf_len); + if (!blob) { + fprintf(stderr, "\nFailed to read '%s'\n", input_filename); + goto out_err; + } + if (fdt_totalsize(blob) > buf_len) { + fprintf(stderr, + "\nBase blob is incomplete (%lu / %" PRIu32 " bytes read)\n", + (unsigned long)buf_len, fdt_totalsize(blob)); + goto out_err; + } + + /* allocate blob pointer array */ + ovblob = xmalloc(sizeof(*ovblob) * argc); + memset(ovblob, 0, sizeof(*ovblob) * argc); + + /* read and keep track of the overlay blobs */ + for (i = 0; i < argc; i++) { + size_t ov_len; + ovblob[i] = utilfdt_read(argv[i], &ov_len); + if (!ovblob[i]) { + fprintf(stderr, "\nFailed to read '%s'\n", argv[i]); + goto out_err; + } + if (fdt_totalsize(ovblob[i]) > ov_len) { + fprintf(stderr, +"\nOverlay '%s' is incomplete (%lu / %" PRIu32 " bytes read)\n", + argv[i], (unsigned long)ov_len, + fdt_totalsize(ovblob[i])); + goto out_err; + } + } + + buf_len = fdt_totalsize(blob); + + /* apply the overlays in sequence */ + for (i = 0; i < argc; i++) { + blob = apply_one(blob, ovblob[i], &buf_len, argv[i]); + if (!blob) + goto out_err; + } + + fdt_pack(blob); + ret = utilfdt_write(output_filename, blob); + if (ret) + fprintf(stderr, "\nFailed to write '%s'\n", + output_filename); + +out_err: + if (ovblob) { + for (i = 0; i < argc; i++) { + if (ovblob[i]) + free(ovblob[i]); + } + free(ovblob); + } + free(blob); + + return ret; +} + +int main(int argc, char *argv[]) +{ + int opt, i; + char *input_filename = NULL; + char *output_filename = NULL; + + while ((opt = util_getopt_long()) != EOF) { + switch (opt) { + case_USAGE_COMMON_FLAGS + + case 'i': + input_filename = optarg; + break; + case 'o': + output_filename = optarg; + break; + case 'v': + verbose = 1; + break; + } + } + + if (!input_filename) + usage("missing input file"); + + if (!output_filename) + usage("missing output file"); + + argv += optind; + argc -= optind; + + if (argc <= 0) + usage("missing overlay file(s)"); + + if (verbose) { + printf("input = %s\n", input_filename); + printf("output = %s\n", output_filename); + for (i = 0; i < argc; i++) + printf("overlay[%d] = %s\n", i, argv[i]); + } + + if (do_fdtoverlay(input_filename, output_filename, argc, argv)) + return 1; + + return 0; +} -- cgit v1.2.3