From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- scripts/faddr2line | 295 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 295 insertions(+) create mode 100755 scripts/faddr2line (limited to 'scripts/faddr2line') diff --git a/scripts/faddr2line b/scripts/faddr2line new file mode 100755 index 000000000..0e73aca4f --- /dev/null +++ b/scripts/faddr2line @@ -0,0 +1,295 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Translate stack dump function offsets. +# +# addr2line doesn't work with KASLR addresses. This works similarly to +# addr2line, but instead takes the 'func+0x123' format as input: +# +# $ ./scripts/faddr2line ~/k/vmlinux meminfo_proc_show+0x5/0x568 +# meminfo_proc_show+0x5/0x568: +# meminfo_proc_show at fs/proc/meminfo.c:27 +# +# If the address is part of an inlined function, the full inline call chain is +# printed: +# +# $ ./scripts/faddr2line ~/k/vmlinux native_write_msr+0x6/0x27 +# native_write_msr+0x6/0x27: +# arch_static_branch at arch/x86/include/asm/msr.h:121 +# (inlined by) static_key_false at include/linux/jump_label.h:125 +# (inlined by) native_write_msr at arch/x86/include/asm/msr.h:125 +# +# The function size after the '/' in the input is optional, but recommended. +# It's used to help disambiguate any duplicate symbol names, which can occur +# rarely. If the size is omitted for a duplicate symbol then it's possible for +# multiple code sites to be printed: +# +# $ ./scripts/faddr2line ~/k/vmlinux raw_ioctl+0x5 +# raw_ioctl+0x5/0x20: +# raw_ioctl at drivers/char/raw.c:122 +# +# raw_ioctl+0x5/0xb1: +# raw_ioctl at net/ipv4/raw.c:876 +# +# Multiple addresses can be specified on a single command line: +# +# $ ./scripts/faddr2line ~/k/vmlinux type_show+0x10/45 free_reserved_area+0x90 +# type_show+0x10/0x2d: +# type_show at drivers/video/backlight/backlight.c:213 +# +# free_reserved_area+0x90/0x123: +# free_reserved_area at mm/page_alloc.c:6429 (discriminator 2) + + +set -o errexit +set -o nounset + +usage() { + echo "usage: faddr2line [--list] ..." >&2 + exit 1 +} + +warn() { + echo "$1" >&2 +} + +die() { + echo "ERROR: $1" >&2 + exit 1 +} + +READELF="${CROSS_COMPILE:-}readelf" +ADDR2LINE="${CROSS_COMPILE:-}addr2line" +AWK="awk" +GREP="grep" + +command -v ${AWK} >/dev/null 2>&1 || die "${AWK} isn't installed" +command -v ${READELF} >/dev/null 2>&1 || die "${READELF} isn't installed" +command -v ${ADDR2LINE} >/dev/null 2>&1 || die "${ADDR2LINE} isn't installed" + +# Try to figure out the source directory prefix so we can remove it from the +# addr2line output. HACK ALERT: This assumes that start_kernel() is in +# init/main.c! This only works for vmlinux. Otherwise it falls back to +# printing the absolute path. +find_dir_prefix() { + local objfile=$1 + + local start_kernel_addr=$(${READELF} --symbols --wide $objfile | sed 's/\[.*\]//' | + ${AWK} '$8 == "start_kernel" {printf "0x%s", $2}') + [[ -z $start_kernel_addr ]] && return + + local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr) + [[ -z $file_line ]] && return + + local prefix=${file_line%init/main.c:*} + if [[ -z $prefix ]] || [[ $prefix = $file_line ]]; then + return + fi + + DIR_PREFIX=$prefix + return 0 +} + +__faddr2line() { + local objfile=$1 + local func_addr=$2 + local dir_prefix=$3 + local print_warnings=$4 + + local sym_name=${func_addr%+*} + local func_offset=${func_addr#*+} + func_offset=${func_offset%/*} + local user_size= + local file_type + local is_vmlinux=0 + [[ $func_addr =~ "/" ]] && user_size=${func_addr#*/} + + if [[ -z $sym_name ]] || [[ -z $func_offset ]] || [[ $sym_name = $func_addr ]]; then + warn "bad func+offset $func_addr" + DONE=1 + return + fi + + # vmlinux uses absolute addresses in the section table rather than + # section offsets. + local file_type=$(${READELF} --file-header $objfile | + ${AWK} '$1 == "Type:" { print $2; exit }') + if [[ $file_type = "EXEC" ]] || [[ $file_type == "DYN" ]]; then + is_vmlinux=1 + fi + + # Go through each of the object's symbols which match the func name. + # In rare cases there might be duplicates, in which case we print all + # matches. + while read line; do + local fields=($line) + local sym_addr=0x${fields[1]} + local sym_elf_size=${fields[2]} + local sym_sec=${fields[6]} + local sec_size + local sec_name + + # Get the section size: + sec_size=$(${READELF} --section-headers --wide $objfile | + sed 's/\[ /\[/' | + ${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }') + + if [[ -z $sec_size ]]; then + warn "bad section size: section: $sym_sec" + DONE=1 + return + fi + + # Get the section name: + sec_name=$(${READELF} --section-headers --wide $objfile | + sed 's/\[ /\[/' | + ${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print $2; exit }') + + if [[ -z $sec_name ]]; then + warn "bad section name: section: $sym_sec" + DONE=1 + return + fi + + # Calculate the symbol size. + # + # Unfortunately we can't use the ELF size, because kallsyms + # also includes the padding bytes in its size calculation. For + # kallsyms, the size calculation is the distance between the + # symbol and the next symbol in a sorted list. + local sym_size + local cur_sym_addr + local found=0 + while read line; do + local fields=($line) + cur_sym_addr=0x${fields[1]} + local cur_sym_elf_size=${fields[2]} + local cur_sym_name=${fields[7]:-} + + if [[ $cur_sym_addr = $sym_addr ]] && + [[ $cur_sym_elf_size = $sym_elf_size ]] && + [[ $cur_sym_name = $sym_name ]]; then + found=1 + continue + fi + + if [[ $found = 1 ]]; then + sym_size=$(($cur_sym_addr - $sym_addr)) + [[ $sym_size -lt $sym_elf_size ]] && continue; + found=2 + break + fi + done < <(${READELF} --symbols --wide $objfile | sed 's/\[.*\]//' | ${AWK} -v sec=$sym_sec '$7 == sec' | sort --key=2) + + if [[ $found = 0 ]]; then + warn "can't find symbol: sym_name: $sym_name sym_sec: $sym_sec sym_addr: $sym_addr sym_elf_size: $sym_elf_size" + DONE=1 + return + fi + + # If nothing was found after the symbol, assume it's the last + # symbol in the section. + [[ $found = 1 ]] && sym_size=$(($sec_size - $sym_addr)) + + if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then + warn "bad symbol size: sym_addr: $sym_addr cur_sym_addr: $cur_sym_addr" + DONE=1 + return + fi + + sym_size=0x$(printf %x $sym_size) + + # Calculate the address from user-supplied offset: + local addr=$(($sym_addr + $func_offset)) + if [[ -z $addr ]] || [[ $addr = 0 ]]; then + warn "bad address: $sym_addr + $func_offset" + DONE=1 + return + fi + addr=0x$(printf %x $addr) + + # If the user provided a size, make sure it matches the symbol's size: + if [[ -n $user_size ]] && [[ $user_size -ne $sym_size ]]; then + [[ $print_warnings = 1 ]] && + echo "skipping $sym_name address at $addr due to size mismatch ($user_size != $sym_size)" + continue; + fi + + # Make sure the provided offset is within the symbol's range: + if [[ $func_offset -gt $sym_size ]]; then + [[ $print_warnings = 1 ]] && + echo "skipping $sym_name address at $addr due to size mismatch ($func_offset > $sym_size)" + continue + fi + + # In case of duplicates or multiple addresses specified on the + # cmdline, separate multiple entries with a blank line: + [[ $FIRST = 0 ]] && echo + FIRST=0 + + echo "$sym_name+$func_offset/$sym_size:" + + # Pass section address to addr2line and strip absolute paths + # from the output: + local args="--functions --pretty-print --inlines --exe=$objfile" + [[ $is_vmlinux = 0 ]] && args="$args --section=$sec_name" + local output=$(${ADDR2LINE} $args $addr | sed "s; $dir_prefix\(\./\)*; ;") + [[ -z $output ]] && continue + + # Default output (non --list): + if [[ $LIST = 0 ]]; then + echo "$output" | while read -r line + do + echo $line + done + DONE=1; + continue + fi + + # For --list, show each line with its corresponding source code: + echo "$output" | while read -r line + do + echo + echo $line + n=$(echo $line | sed 's/.*:\([0-9]\+\).*/\1/g') + n1=$[$n-5] + n2=$[$n+5] + f=$(echo $line | sed 's/.*at \(.\+\):.*/\1/g') + ${AWK} 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f + done + + DONE=1 + + done < <(${READELF} --symbols --wide $objfile | sed 's/\[.*\]//' | ${AWK} -v fn=$sym_name '$4 == "FUNC" && $8 == fn') +} + +[[ $# -lt 2 ]] && usage + +objfile=$1 + +LIST=0 +[[ "$objfile" == "--list" ]] && LIST=1 && shift && objfile=$1 + +[[ ! -f $objfile ]] && die "can't find objfile $objfile" +shift + +${READELF} --section-headers --wide $objfile | ${GREP} -q '\.debug_info' || die "CONFIG_DEBUG_INFO not enabled" + +DIR_PREFIX=supercalifragilisticexpialidocious +find_dir_prefix $objfile + +FIRST=1 +while [[ $# -gt 0 ]]; do + func_addr=$1 + shift + + # print any matches found + DONE=0 + __faddr2line $objfile $func_addr $DIR_PREFIX 0 + + # if no match was found, print warnings + if [[ $DONE = 0 ]]; then + __faddr2line $objfile $func_addr $DIR_PREFIX 1 + warn "no match for $func_addr" + fi +done -- cgit v1.2.3